Material Size and Thickness on Curt Class IV Hitch C14011
this hitch claims a significantly higher weight rating than the stock hitch on my 2004 ford excursion 4x4, but looks to be virtually identical. what can you tell me about the size and thickness of the tubing and mounting plates? | The main...
Kayak Carrier Recommendation for Truck with Thule Crossbars on Cap
I want to know what options I have for mounting two 10ft kayaks 28W at widest point on my 04 F250SD crew cab short bed with Leer 100R cap. It has the Thule Tracker II system on top of the cap with 58inch wide bars. I think the two bars are...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
Trailer Hitch and Wiring for a 2000 Ford Excursion
I need a hitch for my 2000 Excursion 4x4 7.3 liter that is rated for 18000 pounds it should be a class 5 hitch do you have one | The 2000 Ford Excursion is actually rated for 10,000 pounds gross trailer weight. The 18,000 pounds is the gross...
Recommended 7-Way Trailer Connector on a 2002 Ford Excursion to Replace Factory Connector
Hello ,I need the whole 7 pin tow harness from oem plug to hitch and dont want to order wrong part thanks | I recommend using the 7-way trailer connector # HM40975 on your 2002 Ford Excursion if you have the round factory connector it plugs...
Are Bolts Included With the Replacement Head for Curt MV Weight Distribution Systems Part # C17075
Does the Replacement Head for Curt MV Weight Distribution Systems Item # C17075 come with the bolts to mount to the Curt Adjustable Weight Distribution Shank - 8inch Item # C17100? | The Replacement Head for Curt MV Weight Distribution Systems...
Parts Needed to Install Prodigy P3 in 2005 Ford Excursion
Hello I have this controler what part would i need to connect it to a 2005 Ford Excursion for plug and play? Thanks! | All you need to install the Prodigy P3 # 90195 in your 2005 Ford Excursion with the factory 7-Way is the install harness...
Does TorkLift PowerArmor Solar Locking Battery Box Always Come Powder Coated
Hello, I take that the battery box is made from 100 aluminum. Is it possible to have the box NOT powder coated with black paint? | The TorkLift PowerArmor Solar Locking Battery Box # TLA7710RS is made from aluminum but there is no option to...
Will the Curt RockerBall Fit on the C45340 Ball Mount?
Will this work with the Curt Rocker ball that has the 1 1/4” shank? | As long as the Curt RockerBall has a 1 1/4 shank, like the # C29FR, you will have no issue installing it on the # C45340. With you using a ball that moves though, I highly...
Replacement Round Spring Bar for Weight Distribution System
what is the diameter of the bar were it slides into the hitch ? I am trying to figure out what brand hitch I have , it looks like the curt but you claim the bar diameter is 1 1/4 inch my hitch hole bar diameter measures 1 1/2inch and the reese...
Can Firestone Air Bags be Installed on a 2001 Ford Excursion that Does Not have Jounce Bumpers
I have a 01 Excursion with a 5inch rear block and no jounce bumper pad. Does the air kit need that bumer pad to complete install? Do i have any other options? | To install Firestone Ride-Rite air bags # F2251 on a 2001 Ford Excursion 4x4 the...
No Power to Connector on 2000 Ford Excursion
2000 Ford excursion 4wd v10. I have no power to the trailer plug. Also I have no power at the 4 fuses under the hood. Any help would be great. | There are a number of different issues that may be occuring with your 2000 Ford Excursion if...
Trailer Side Mounting Bracket for Reese Friction Sway Control 26660
I have two trailers I would like to mount the sway controller on. Is it possible to buy an additional mounting plate and accessories, so I dont have to buy two complete controllers? I can only tow one at a time! Thanks for the excellent customer...
Which Front Mount Trailer Hitch Receiver For a 1999 Ford Excursion
do you have a front hitch to fit this vehicle. | I reached out to Curt directly and found that the Curt Front Trailer Hitch Receiver # 31114 will work on your Ford Excursion. From my research Ford started production of the Excursion in September...
Does the Yakima MegaWarrior Fit on a 2005 Ford Excursion
Are the parts made for the mega warrior 74” to still fit a 2005 Ford Excursion? | The Yakima MegaWarrior Extra Large Roof Rack Cargo Basket, part # Y07080-82, is designed to fit round, square, aero, elliptical, and most factory crossbars. If...
Do Tires With Different Load Ranges Have Different Speed Ratings
5.30-12 class C vs class D. i have a popup camper with 5.30-12 class C tires and was told that max speed was 65mph due to the tires. Would the class D tires have a higher mph rating? | Speed ratings will depend on the specific tire itself, as...
Which Crossbars Fit A 2005 Ford Excursion?
Roof rack for 2005 Ford Excursion. Need long ones | The recommended roof rack for your 2005 Ford Excursion is the Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long # TH711420 with Feet # TH460R and Fit Kit # THKIT3101. This setup is...
Replacement Mounting Hardware for Westin Brush Guard that Fits 2000 Ford Excursion
Hi I have a westin chrome brush guard for my 00 ford excursion but mis places the attachment brackets do they make them that I can just buy them? | The replacement hardware you need for the chrome Westin Sportsman Brush Guard # 45-0220 for your...
Recommended Kayak Carrier for Two Kayaks On 2000 Ford Excursion With Factory Low Profile Crossbars
I recently purchased two 10 kayaks. My 2000 Excursion, which came with factory roof rack having 7 side rails, appears to not have the needed clearance between the bottom of the cross rails to mount any kind of kayak carriers, as most of the...
Recommended Wiring Kit for Hitch Mounted Winch
Can this setup be used to power a hitch mounted winch on the back of my Excursion? Is there a better option? | The Deka 2 Gauge Professional Service Booster Cables, # DW00161, can be used to power your hitch mounted winch, but it wasn't really...
Troubleshooting Curt Trutrac System Digging Into Brackets
I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...
Maximum Tongue Weight Using 2-5/16" Ball With The B&W Tow & Stow 3-Ball Mount
w/ the 2 5/16 ball the gross towing weight is 10k, what is the max tomgue weight? | With the 2-5/16" Hitch Ball, the B&W Tow & Stow 3-Ball Mount # BWTS10047C has a 10,000 lb Gross Towing Weight and 1,000 lb Tongue Weight. This is of course...
How to Adapt Timbren Rear-Axle Jounce Springs for Vehicles with 2-inches of Lift
I have a 2005 Ford Excursion 2 wheel drive that is stock height. I installed a Timbren system on the rear to improve towing and it has helped tremendously. However, Im planning to put an additional lift of 2inch on the rear as it rides low...
Option for Needing Extension with Stromberg Carlson Jack
Does Stromberg make a drop leg extension approx 1 foot long, or is there another after market product that will work with the Stromberg jack that works as a jack leg extension? | The best option we have would be something like the Camco Trailer...
Filter Your Search
Contact and Help