Which Roof Mounted Ski and Snowboard Carriers Will Fit a 1998 Chevy Tahoe with Factory Roof Rack
Which Yakima Vertical Mighty Mounts for ski racks will fit the factory cross bars on a 1998 Chevrolet Tahoe. | According to Yakima, with factory crossbars on your 1998 Chevy Tahoe, you need to use Universal MightyMounts for Yakima Ski Mounts,...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Brake Controller Recommendation for 2007 Holiday Rambler Endeavor
What harness number do I need for a for prodigy controller to fit a 2007 holiday rambler endeaver | The brake controller wiring you need is terminated in a connector under the left side control panel next to the driver seat of your 2007 Holiday...
Installing a Brake Controller in a 2002 Holiday Rambler Endeavor
I have a 2002 Holiday Endeavor. I am wondering what wiring harness I would need to install a Brake Controller, and where would I find the plug to plug into on my motorhome. | A brake controller is going to need to be hardwired into your 2002...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Do I Need To Lower My Muffler To Install This Hitch?
I have a 2008 Mitsubishi Endeavor I want to put a hitch on it but my muffler is directly or almost directly blocking one of the hose for the hitch do I reroute my exhaust or do you make a hitch that goes around it what to do | Hello, We have...
Does the Bargman Porch / Utility Light # 3478518 Use a Bulb or LED's
This fixture is included with the LED lights. The pictures indicate that it is an incandescent light. Would you please clarify which is correct? If this model uses an incandescent bulb, do you have a similar light illuminated with LEDs? | The...
How to Install Trailer Wiring on a 2004 Mitsubishi Endeavor Pulling a Boat Trailer with a 5-Way
I have a 2004 Mitsubishi Endeavor. My boat trailer has a 5 wire system. Can this wiring kit convert to the five wire plug? Trailer has a brake activation system. | Yes, the fifth wire on your boat trailer is most likely a reverse lock-out...
Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
Will a Trunk Mount Bike Rack Fit on a 2008 Mitsubishi Endeavor and Not Scratch It
Wil this bike rack work on my 2008 mitsubishi endeavor and not scratch it? | The Thule Passage trunk mount bike rack # TH910XT is a fit for the 2008 Mitsubishi Endeavor. However, it is possible that this or any trunk mount bike rack can cause...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
2011 Jayco Jay Feather Tire and Wheel Replacement Recommendation
2011 Jayco Jay Feather tire and wheel replacement Just bought this camper and prior owner thinks these tires are original so Im thinking of replacing them. They are.. ST205/75 R14 The tire says Do Not Mount on a 14.5 inch Rim Load Range...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
Where is the Trailer Wiring Connection Point for a 2007 Mitsubishi Endeavor
I would like to know exactly where the electrical connection is made. I dont see any wires inside the area around the spare tire and there are very few wires with access undr the rear of the vehicle. | The connection point for the Curt Wiring...
Will Derale Remote Engine Oil Cooler Installation Kit, # D15751, Fit a 1985 GMC S-15 with 2.8 Liter
will this fit a 1985 gmc s15 2.8 v6 engine | The 2.8 liter GM motor for the 1985 GMC S-15 uses a filter thread size of 18 x 1.5mm and O-ring size of 2-3/4 inches. The Derale Remote Engine Oil Cooler Installation Kit, # D15751, has multiple thread...
Recommended Trailer Wiring Connector On 2004 Holiday Rambler Endeavor
I am not the original owner 2004 Holiday Rambler Endeavor - the wiring has been cut leaving the wiring cut with blunt ends = is there any way that I can get the correct wiring colors to install a 6 pole male connector. My trailers are all 4...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
Is the Yakima SkyBox Rooftop Cargo Box # Y07336 Completely Waterproof
Is this box waterproof? | In the strictest sense of the word, "waterproof" would mean water absolutely cannot enter a product. In reality there will always be some circumstance where some moisture could enter a product like a cargo box, even...
Electric Brake install 2000 Coleman Sedona
I have a 2000 Coleman Sedona popup camper. Ive verified it has the Dexter 2000 lb axle. Ive also verified it has the backing plate with 4 holes on each side behind the tires so it will accept electric brakes. Currently it doesnt have any brakes...
Electric Brake install 2000 Coleman Sedona
I've confirmed my bearings are 44643 for inner and outer. Ive also got the 5 on 4-1/2. So I would like a list of parts for the Electric Brakes for the 2000lb Dexter Axle. Ill need the Hub/Drum. Could you include Wiring in this as well for a...
Hitch and Wiring Installation on 2008 Mitsubishi Endeavor
trailer hitch instalation and wiring harness | For the 2008 Mitsubishi Endeavor, I would recommend the Curt Class 3 receiver hitch, part # 13113. To provide lighting for your trailer, we recommend the 4 Pole Harness and Hardwire Kit, part #...
Trailer Wiring Harness for 2004 Mitsubishi Endeavor
Im thinking about getting T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - Mitsubishi Endeavor, 2004 My Endeavor does not have the trailer package. I was reading on other sites that their cable would not work because I did not...
Brake Controller Option for Towing Camper with Several Different Vehicles
I need to tow the trailer with the electrical braking with several vehicles and od not want to install a control unit in each vehicle. Can I install the control in the trailer itself? It is a camping trailer with its own battery so I have...
Filter Your Search
Contact and Help