Will EZ Connector 7-Way Kit 319-R7-06 Fit 2015 Coachman Mirada
WILL THIS FIT MY 2015 COACHMAN MIRADA. I BELEAVE ITS ON A FORD F53 CHASSIs. | Yes the EZ Connector Custom Vehicle Wiring Harness # 319-R7-06 that you referenced will fit the 7-way connector you have on your 2015 Coachman Mirada. |
Can Convert a Ball Fifth Wheel Adapter be Locked
afternoon, About 6 years ago I bought a Covertaball- fifth wheel adapter from your company. It has worked well since purchasing. Now i would be interested in buying a locking device for your product. Cay you recommend a product that would...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Can The 2-1/2" Hitch Receiver # BP82FR Bolt to Combination Pintle Hitch w/ 2-5/16" Ball # BP38FR?
Will these holes match up to the buyers products 15 ton combo pintlex2-5/16 ball combo hitch you sell? Thanks in advance! | The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver # BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally....
Parts Needed To Flat-Tow My 1987 Suzuki Samurai
Need to tow 87 Samurai. Have a good tow bar DEMCO Excali-Bar model 9511006 Plan to order Base Plate #1003-1 plus Adapter kit RM-032 and Wiring Kit #38955 Is this correct for this vehicle and tow bar? | Yes, the Roadmaster Classic Base Plate...
Timbren Helper Spring Fit for 2007 Ford F-650
I currently have 6” of vertical clearance measured from the top of axle housing to the bottom side of my frame rail.it’s my understanding the timbren system once installed should be 1” clearance above the axle housing.I can find any dimensions...
Options for Controlling Trailer Electric Brakes with Tow Vehicle Air Over Hydraulic Brakes
I saw some recommendations and a tutorial on your website for installing a trailer brake controller for a trailer with a 7-way plug and truck with air brakes. I have a truck 2008 Ford F650 with air over hydraulic brakes. Would this be the...
Replacement Inner Tube For Gooseneck Trailer Coupler That Doesnt Use Through Pin
We recently got a new truck, its an F750 and our trailer doesnt sit level. Weve lowered the gooseneck as far as we can. I see a few Bulldog products you have that would allow me to replace the interior pipe on the hitch to give me the additional...
What Gauge Wire for the Power Wire of the Prodigy RF Brake Controller
I need to run a power wire for my RV receptacle. How much of a load will it draw? 30 feet of wire to a battery, or can I take power from the rear lights? Prodigy rf power wire | For running the power wire of the Prodigy RF brake controller...
Where Does the Roadmaster Base Plate part # 1003-1 Install on a 1986 Suzuki Samurai
1986 suzuki samuria the instructions for the baseplate 1003-1 does not mention the front bumper? does the baseplate go behind the bumper and the attaches to a tow bar? | The Roadmaster base plate kit part # 1003-1 that you referenced attaches...
Spare Tire Mounted Bike Rack Recommendation for a 1987 Suzuki Samurai
Was just wondering if the spare tire bike rack will work on a 1987 suzuki samurai? Thanks | Yes, I checked with Hollywood Racks and the SR1 2-Bike Carrier # HRSR1 that you referenced has been confirmed as a fit for your 1987 Suzuki Samurai....
Does Installation Of Base Plates For 1988 Suzuki Samurai Use Tie-Down Loops
Baseplate #1003-1 will it simply bolt up to a stock 1988 Samurai? What about the tie down loops, does 1003-1 use these? Thanks | I have attached the installation instructions for the Roadmaster Classic Base Plate Kit, part # 1003-1 for your...
Help Leveling 5TH Wheel Camper After Installing GEN-Y 5TH Wheel To Gooseneck Pin Box Adapter
I purchased this hitch last fall and just had an opportunity to get it installed and hooked up to the truck this weekend. The trailer is much higher in the front than the back. Any suggestions to get it leveled? | It looks like you have the...
Weight Capacity for the Trailer Valet Trailer Jack # STC-V21
What are the weight limitations for the Trailer Valet Swivel Jack? | The Trailer Valet Trailer Jack # STC-V211 that you referenced has a 500 lb tongue weight rating. Check out the review video I attached for more information. |
Diameter of Hole That Runs Through Timbren Spring # TJFJ10
I need to know width of the mounting bolt holes for part number TJFJ10. Thank you | The diameter of the hole that runs down the middle of the Timbren spring of part # TJFJ10 is 1/2 inch. |
Flat Towing a 1990 Suzuki Samurai With Separate Tail Light Wiring
I purchased a 1990 Suzuki Samurai that has been previously wired for towing behind an RV. It is a butcher job and I will be removing it and all its splices into the OEM tail light housings and wiring. I am installing all new OEM tail light housings...
Is there a Reese Super Titan Trailer Hitch that Bolts On for a 2004 Ford F-750 Funmover RV
Hi, I would like to install a Super Titan hitch on my 2004 Ford F-750 Funmover class-C RV. The truck has a lift gate and has 1 foot extensions bolted onto the frame rails with a doubler section of c-channel. I dont feel too confident about welding...
Finding Stoplight Switch for Installing Brake Controller in 2019 Ford F-750
Need know colors to hardwire brake controller to on a 2019 f750 with air braked, trailer has electric brakes. Whete does stoplight wire into since no switch due to air brakes | We don't have the install wiring colors of the brake controller...
Parts Needed to Flat Tow 1987 Suzuki Samurai Behind a Motorhome
I have an 1987 Suzuki Samurai that we are looking to flat tow behind our 2016 Itasca Navion. What base plate kit will I need to complete my setup? | We can get you the right parts needed to flat tow your 1987 Suzuki Samurai behind your motorhome,...
What Tow Bar and Mounting Brackets Will I Need to Tow 1987 Suzuki Samurai
tow bar? what do all I need with ordering tow bar... Do the tow bars come with mounting brackets for my Suzuki if not where do I find those, and will they go with hook up style of the tow bar? Thanks | There are a few things you will need along...
What Tie Downs are Needed to Install Roadmaster Base plate Kit 1003-1 on a 1992 Suzuki Samurai
When I looked up the toe bar base plate for my Samurai it said the car must have tie downs. What are tie downs and where would I look for them? Thanks. | The base plate kit for a 1992 Suzkuki Samurai, part # 1003-1, refers to the tie down loops....
Base Plate Fit on 1987 Suzuki Samurai With Front Leaf Springs
The instructions say to remove bolts on torsion bar mounts. The Samurai does not have torsion bars. It has front leaf springs. Where does the base plate mount with the leaf springs and what other changes are there to mount it to the vehicle?...
How to Prevent Sagging on my 2005 Ford F-750 Dump Truck
Recommend rear sumo springs or timbren system for 2005 ford f750 dump truck 2wd. To help correct sagging | I have two really good options for you to solve this sagging issue. Great news is they can be used together if you choose to. The first...
Gooseneck Trailer Hitch Options For a 2013 Ford F-650
IM LOOKING FOR A GOOSENECK HITCH FOR 2013 FORD F-650 CAB and CHASSIS 34 FRAME WIDTH | I have a couple options for you as I do not see any custom fit gooseneck hitches available for your 2013 Ford F-650 Cab and Chassis. First is the Buyers Products...
Filter Your Search
Contact and Help