Recommended Trailer Brake Controller and Wiring for 2005 Pontiac Vibe
I have a 05 Pontiac Vibe I need to wire it up to tow a pop up camper that has electric brakes so I will need a brake controller. Just not sure what I need.... The standard harness plus the Universal Installation Kit for Trailer Brake Controller...
Diameter of the U-Bolts for the Lippert Bolt On Shock Kit 281281
What diameter are the U bolts in this set? | The diameter of the U-bolt for the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 is 9/16". |
Hitch and Bike Rack Recommendation for a 2003 Pontiac Vibe
Hello, I need a hitch for my Vibe that has a 2inch receiver. W hat do you suggest? Everything I see is a 1 1/4 receiver. This is for a bike rack that has a 2inch not a 1 1/4, dont want to reduce down, will add too much play and bounce. Thanks,...
Will the SportRack Vista Roof Cargo Box Fit a 2004 Pontiac Vibe with Factory Roof Rack
Will this carrier fit a 2004 Pontiac Vibe with a factory-installed roof rack that includes cross bars? And will it mount without the rooftop antenna having to be removed? | The SportRack Vista cargo box # SR7018 will fit on crossbars that are...
Will My Hitch Ball Fit the Curt Class II Round Tube Trailer Hitch on my 2004 Pontiac Vibe
Does this hithch come with a hitch-ball? I already have a U-haul hitch-ball I bought for a 91 jeep cherokee. Can I use it with this hitch? On the metal bar is stamped: V-5 U-haul Max load 3500 lb Tongue wt 350 lb On top of the ball is stamped: U-Haul...
What is Shank Rise for Hollywood Rack Bike Rack # HR200
please explain shank rise | The Hollywood Rack Bike Rack part # HR200Z has a shank rise of 5 inches which means the curve you see in the shank (the portion that attaches to the trailer hitch and the rest of the rack), goes up a total of 5 inches...
Does the Heat Shield on a 2007 Pontiac Vibe have to be Trimmed to Install a Trailer Hitch
The description for this hitch receiver states Heat shield modification may be required. Are any modifications needed to the heat shield of my 2007 Pontiac Vibe non-GT model to install this product? Thank you. | The only note in the actual instructions...
Trailer Hitch Recommendation for Carrying 4 Bike Rack with 2007 Pontiac Vibe
Hello,I have a Curt 4 bike carrier.Cant decide on a hitch. C12234 class2 with 4 bolt mounting or 24812 Draw Tite class1 6 bolt mounting,with the same ratings.200/2000.Does it make a difference with the same ratings?.I read the C12234 hits the...
Overall Length of Replacement Top Tube Pad # 8537418
Can you tell me the length in inches of the Thule Hull-a-Port top tube pad, part # 8537418? | The overal length of the Replacement Top Tube Pad # 8537418 that you referenced is 7-1/2 inches. |
Trailer is not Level When Towing with Recommended Drawbar
I purchased this hitch and the recommended drawbar but my trailer is not level when towing. Front is lower, is there anthing I can do to get my trailer level? | The instructions (see link below) state that the drawbar must be used in the rise...
Is Hardware Included with Draw-Tite Hitch 24812?
The description doesnt mention if the mounting bolts and washers are included. I was wondering if I needed to pick some up? Thanks | Yes, all the necessary hardware and instructions are included with all of our hitches. |
Adding Larger Wheels to Trailer Hub Assembly with Same Bolt Pattern
I am looking at 8-259-5UC1-EZ. It says they are for 8-12 inch wheels. Is there some reason it wouldnt work for bigger wheels as long as the bolt pattern is correct? I ask because I have hubs similar to this and want to put bigger 13inch or 15inch...
Will Rightline Cargo Hatch Saddlebag # RL100B90 Fit 2007 Pontiac Vibe
Im moving from Wisconsin to Washington State. Will the saddlebag fit my 2007 Pontiac Vibe. I dont want to get the rooftop cargo carrier as I will be driving through mountains and was told the rooftop carriers can cause problems. Thanks. | As...
Availability of 2 Inch Trailer Hitch for 2006 Pontiac Vibe
Do you make a bolt on trailer hitch for a 2006 Pontiac Vibe suv that has a 2inch square receiver ? | The available trailer hitches that are confirmed to fit your 2006 Pontiac Vibe all have 1-1/4 inch receivers. This is likely because the vehicle...
What Base Plate Do You Recommend for My 2005 Pontiac Vibe?
Have a 2005 Pontiac vibe. Looking for a base plate for it | For a great quality base plate for your 2005 Pontiac Vibe, I recommend the Blue Ox Base Plate Kit - Removable Arms # BX3224. The Blue Ox plate comes with a custom-fitting that will...
Transmission Cooler Recommendations for 2005 Pontiac Vibe
Can you tell me if you have a cooler for an 05 Pontiac Vibe. Not GT. | A transmission cooler is not a vehicle-specific item, it can be installed on just about any vehicle that has an automatic transmission. The best and most efficient place...
Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker
We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...
What Can I Use to Carry a Canoe on a 2004 Pontiac Vibe with Factory Raised Rails
I have a 100 lb. fiberglass canoe 14 long and am trying to determine if there is a roof rack system that I can use to transport it on my 2004 Pontiac Vibe which has factory side rails but no cross rails. I saw a Yakima base rack system that...
Comparing the Swagman XC and XTC-2 Platform Trailer Hitch Mount Bike Racks on a 2004 Pontiac Vibe
Hi- What are the differences between the Swagman XC2 and XTC-2 bike racks? We have two 30 lb dual suspension mountain bikes with tires that are almost exactly 2.5 in. wide. I am leaning toward the XC2 b/c of the tire width, but am not sure if...
Can Roadmaster Sterling Tow be Used to Flat Tow 2009 Pontiac Vibe GT
Hi, Ive recently acquired a motorhome that came with a tow bar and baseplate. I own a 2009 Pontiac Vibe GT that Id like to flat tow, and Im curious if the baseplate and tow bar I have will work with it. The motorhome came with a roadmaster...
Possible Solution to Install Hitch on Vehicle with Broken Weld Nuts
I knew when replacing my hitch Curt 12228 purchased etrailer order 107783101 on my 2009 pontiac vibe that two of the internally welded frame nuts were broken. I had to grind off the bolts after being rear ended and needing to replace the hitch....
Why is Draw-Tite Hitch a Class I and Curt Hitch is a Class II for a 2006 Pontiac Vibe
Draw Tite is classified as class I and Curt is classified as class II. When I look at the specs they have matching specs: 200lbs tongue weight and 2000lbs towing. What makes the Curt a class II and it only bolts with 4 bolts? Draw Tite...
Roof Rack Option for 2010 Pontiac Vibe
Hello, I have a 2010 pontiac vibe, and heres my problem : as the roof isnt really large, and to maximize the distance between the 2 racks bars, I need one to fix with the seal of the window on front, and another one fixed to the vibes fixed...
Does Conical Washer 01292-008 Fit Curt Hitch that Fits 2007 Pontiac Vibe
Will your 1/2 inch conical toothed washer fit the 12 mm bolt for my Curt trailer hitch on my 2007 Pontiac Vibe? Thank you. | Yes the Reese conical washer part # 01292-008 will work with the install hardware of the Curt hitch # C12221 that fits...
Filter Your Search
Contact and Help