2021 Acura TLX Trailer Hitch Fitment and Installation Difficulty
Hi, Do you have a testimony from anyone who has installed your trailer hitch on the new Acura TLX 2021 or newer? Im curious how they fit and how hard it is to install one. Thank you. | The Draw-Tite Sportframe Trailer Hitch Receiver # DT68GR...
Recommended 2020 Acura TLX Hitch Receiver
I would like to purchase a hitch receiver for my car that does not protrude past my rear bumper. I see there is a Curt hitch that fits but I cannot tell from the photo whether it will stick out past my bumper. I’m just trying not to hit my...
Which Hitch for 2015 Acura TLX Weighs Less Curt or Draw Tite
Which of the hitches: Draw Tite or Curt hangs down lower ? Is the the Curt twice as heavy as the Draw Tite? | The Curt hitch part # C11535 weighs 29 lbs and the Draw Tite part # 24942 weighs in at 26 lbs so the weight is about same. Both of...
How Far Past The Rear Bumper Will The Draw-Tite Trailer Hitch Receiver Sit on a 2021 Acura TLX?
How far away from body of 2021 does your hitch stick out | While we have not had a 2021 Acura TLX in our shop to provide you this measurement Joseph, I took some measurements of the Draw-Tite Sportframe Trailer Hitch Receiver # DT68GR which...
Landing Gear Fitment on 2021 Forest River XLR Nitro 35141 5th Wheel Toy Hauler
I have a 2021 XLR Nitro 35141 ft 5th wheel, will the MORryde MR72ar fit my toyhauler? I measured between my jacks and it is 81 inches. | Since the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR fully extends up to 80" and the...
How to Determine Correct Hub With 6 on 5-1/2 Bolt Pattern for Trailer
I recently purchased a used trailer-form the looks of it a homemade one. The Current Hub is a 4x100 bolt pattern. I am wanting to switch it to a 6x5.5 bolt pattern. I am need some guidance on how to make sure I get the right hubs. | I can tell...
Replacing Create-A-Breeze 8100 Vent Fan With Fan-Tastic 7350 Wireless Vent Fan
I have a 2012 NUWA Discover America Fifth Wheel. I am wanting to upgrade one of my fantastic fans to the 7350 version with remote. My fan is a B8100 version with wall mounted dome lift motor switch and on off switch to power the fan. It has...
Do the Trailer Hitch Holes In the Frame On a 2019 Acura TLX Need to Be Enlarged
I have a 2019 ACURA TLX I dont want to drill anything into my car! thats considered FRAME DAMAGE and will devalue my car, so what do I have to make bigger? the hole in the trailer hitch or the frame of my car. please let me know, if I take this...
Bearings for 7,000 lb Dexter Axle and is Press Needed to Install
what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...
How Heavy are Trailer Hitch Receivers for 2017 Acura TLX
How much does the actual hitch weigh for the 2017 Acura tlx | We carry two trailer hitch receivers that fit your 2017 Acura TLX. The Draw-Tite # 24942 weighs a little over 20 pounds and the Curt # C11535 is just under 30 pounds. |
Trailer Hitch Receiver For 2015 Acura TLX For Bike Rack to Carry Ebikes
Id like to be able to transport two Ebikes on my 2015 Acura TLX 6 Cylinder sedan. I have RadRover Ebikes. RadRover Sells Bike Rack that can transport two RadRover Bikes. However, the carrier requires a 2 Hitch. Do you offer a 2 Hitch for...
Will the Draw-Tite Sportframe Trailer Hitch Receiver # 24942 Fit a 2018 Acura TLX
The instructions are for a 2015 tlx but the hitch says it fits the 2018. All of the 2018s are different than the 2015-2017, and I have the aspec version. I want to get a hitch to carry my bike, but don’t see where anyone has put one on a 2018...
Availability of 10 inch Brake Assemblies with 4.4k Capacity by Dexter
I have 2012 trailer Acadia to Forest river and I am look for a dexter brand brake kit 4.4k 10x21/4. Can not find this model. Does he still exist. Tank you | We do have the Dexter 10 inch brake assemblies you are looking for. For that the part...
Does Curt Class I Hitch C11535 Require Drilling for Installation on 2015 Acura TLX
Hi, Were the holes already drilled for installation of the hitch it do I need to drill? Thanks. | The Curt Class I hitch you referenced, part # C11535, does NOT require you to do any drilling for installation on your 2015 Acura TLX. You will...
Which Trailer Hitch Fits a 2015 Acura TLX
Does the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class lll - 2inch fit a 2015 Acura TLX? | At this time (January 2017) the only hitch we have confirmed as a fit for your 2015 Acura TLX is the Curt hitch part # C11535 which...
Will the Draw-Tite SportFrame Trailer Hitch Interfere With Rear Diffuser on 2020 Acura TLX
My 2020 TLX came from factory with a rear diffuser. Does this interfere with the draw tie and curt hitches? | Great Question, Harold. I took a look at the Draw-Tite Sportframe Trailer Hitch Receiver # 24942 and it looks like you should be fine....
How to Install a Hitch on a 2019 Acura TLX
How difficult is it to install this trailer hitch yourself? I have some pretty good mechanical skills but I am not a professional. | The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # 24942 you referenced...
2022 Acura TLX Type S Hitch Fitment
Item # DT68GR Says that this fits all modelsinch of the TLX Just wanted to make sure that this will fit a TLX Type S? | Yes, the Draw-Tite Sportframe Trailer Hitch Receiver # DT68GR has been confirmed by Draw-Tite to fit all models of the 2022...
Recommended Hitch Cover for Curt Class I Trailer Hitch on 2015 Acura TLX
purchased a trailer hitch for an Acura TLX 2015 last fall. Just installed. It was one of the Curt hitches. Installed with out a problem. Did not include the dust cover that is used to protect the hitch when the ball mount is out. Can I...
Can Valve Stem of Aluminum Viking Series Valhalla Trailer Wheel Handle 120 psi
What are the valve stem rated for on Item # AX02665865HDBMMFL. My G rated tires recommend 120psi cold. Also, are all trailer axles with 8 lugs, 8x6.5 spacing? | A cold psi of 120 is absolutely no problem for the Aluminum Viking Series Valhalla...
Which MORryde Suspension Upgrade Kit for Tandem Axle Trailers Fits 2022 XLR Nitro 28DK5
We have a new to us XLR Nitro 28dk5 5th wheel 2 axle toy hauler. The suspension is pretty noisy despite having a Morryde CRE 3000 on it. I poked at it the other day and realized it doesnt have wet bolts on it. Looking at a wet bolt kit for it...
Can I Install a 2" Hitch on My 2020 Acura TLX
do you have a 2 inches hitch for my acura tlx 2020? | The only trailer hitch fits available for your 2020 Acura TLX are the Class I hitches with the 1-1/4" receiver from Curt # C11535 and Draw-Tite # 24942. I recommend going with the one from...
Do Nev-R-Lube Trailer Bearings Need Maintenance
Need to know how to check brakes on my nev-r-lube axle and when those bearings need to be replaced. | The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would...
Powered Awning Setup For 2020 Boost XLR And Other Toy Haulers / RVs
We saw a 2018 Forest River for Nitro toy hauler with an automatic Thule awning on the rear of the trailer. Can you tell me which one it is? We have a 2020 Boost XLR we want to put one on. | We do have a few options that you could consider...
Filter Your Search
Contact and Help