Is Convert-A-Ball Offset Gooseneck Adapter Required to Be Bolted to Underside of 5th Wheel King Pin
My cousin has a Convert-a-ball w/offset king pin adapter from etrailer on his trailer. He told me that the four mounting bolts holding the top plate to the king pin box was an option to install until you get the trailer home. Is it safe to travel...
Thule Roof Box for a 2016 Toyota 4Runner with Factory Roof Rack and Crossbars
Hello - I have a 2016 Toyota 4Runner SR5 with a factory roof rack and cross bars. I am looking at twoThule roof boxes The Force XXL and Motion XT and am wondering if these will fit on the factory cross bars while still allowing me to fully open...
Replacement Velcro Strips for a TruXedo Tonneau Cover on a 2008 Ford F-250
2008 Ford F250 with an 8 ft box and a Tuxedo cover The velcro strips on my cover now are about 1-5/16 inches wide and it moves around in the track but this one says it is 1-1/4 inches wide. My concern is that the new one will not be wide enough...
Determining What Replacement Pin Box Will Fit 2014 Keystone Mountaineer Fifth Wheel Trailer
I purchased 2014 Keystone Mountaineer 291RLT. Is the 5th Airborne Premium Fifth Wheel Air Ride Coupler - Extended 12-1/2inch Wide Air Ride compatible with this? Does this extended pin box provide better turning radius than without it? | We...
Size of the Sides on the High Country Plastics Horse Water Caddy part # SL-25
Is it 14 1/2inch on all sides? | Yes, all three corners of the High Country Plastics Horse Water Caddy part # SL-25 are 14-1/2 inches. |
Comparison of B&W BWGNRK1108-5k Rail Kit and BWGNRK1108 Turnover Ball Gooseneck Hitch
what is the difference between BWGNRK1108 and BWGNRK1108-5k | There is no difference between the two parts you mentioned, # BWGNRK1108 and # BWGNRK1108-5K. We use two different part numbers because we're marketing one as a Turnover Ball gooseneck...
Recommended Air Springs for 2006 Ford F-350 with B&W Gooseneck Hitch Installed
Looking for a recommendation for air springs on my 2006 F350 CCLB 6.0L Powerstroke with BandW Gooseneck turn over ball. I will be pulling a Gooseneck with a total combined weight trailer and cargo of up to 21,000 lbs. I think I’m leaning toward...
Placement of a Fifth Wheel Hitch and Recommended Base Rails for a 2007 Ford F-350 Super Duty
I own a 2007 ford f-350 super duty two wheel drive truck and tow a 35foot fifth wheel camper. My truck has a removable reese hitch. The hitch brackets were installed with support brackets between the rails/ bed of the truck and the frame rails...
Trailer Wiring Recommendations for Ford Super Duty Truck Late Model
We have several late model Super Duties that didnt come w/ a frame mounted receptacle. I watched the video installation of part # 20119. It appears to be what we need. But we also need an adaptor that fits into that part #20119 and adapts to...
Roof Rack Recommendation for Roof of Enclosed Cargo Trailer
I am interested in putting a rack system on a enclosed cargo trailer I own. I want to install a roof-top tent. see: On the rack. The weight of the roof-top tent is 128 lbs, Do you have a recommendation? Thanks | For an enclosed cargo trailer...
What is the Thread Pitch for 2 Inch Hitch Ball # 19258
What is the thread pitch/size of trailer balls with a 3/4inch shank? | If you are buying a new ball such as # 19258 then its thread pitch doesn't matter because it comes with a compatible nut. This ball has 16 threads per inch which is about...
Is there an Adapter to Fit a Hitch Ball with 1 Inch Diameter Shank in a 1-1/4 Ball Hole
I have a weight distributing hitch with a 1 1/4 hole and a 2 5/16 ball with a 1inch shank. Is there a spacer/adapter available to convert or do I have to buy a new ball? | All you will need is a mushing # 58184 that will allow you to use the...
Parts Needed to Install a Reese Signature Series Fifth Wheel Hitch in a 2006 Ford F-250
I have a Signature Series hitch out of my previous owned 2004 F250 that my neighbor wants to install in his 2006 F350. It appears that he will need Under bed rail installation kit PR30073. Does he also need PR58419? | He will need both of...
Fifth Wheel Gooseneck 7-Way Recommendation for a 2008 Ford F-250
I have a 2008 F250 short bed. Im looking for a wiring harness for a gooseneck trailer that my factory 7 pin plug will still work with the gooseneck wiring? So I would like for both plug 7 pins to still work. Thank You | For...
Will Yakima Skybox 18 Fit 2017 Toyota 4Runner and Allow Rear Hatch to Open
Guys Will a Yakima Skybox 18 fit on a 2017 toyota 4Runer without interference from the rear door when fully open? | Measure the distance from the middle of the front crossbar rearward to the seam between the roof and the top of the rear hatch....
Will SuperChips Programmer SU4845 Raise Speed Limit of 2001 Ford F-250
CAN THE SUPERCHIPS MAKE MY 2001 FORD F250 V10 GO MORE THAN 100 MPH? | The Superchips Programmer part # SU4845 that is a fit for your 2001 Ford F-250 with a V10 can allow you to raise the speed limiter of your truck. But we strongly recommend...
Recommended Hitch for 1998 Toyota 4Runner
Hello i have a customer that is looking to put a front mount on his 1998 4 runner is this 65041 going to work on that vehicle i have been having a very hard time finding one found the warn front receiver but customer does not want to pay that...
Front Mount Trailer Hitch for a 2014 Toyota 4Runner
What front mount hitch can you recommend for the 2014 Toyota 4runner? | For your 2014 Toyota 4Runner you can use Curt front mount hitch # C31054 that you have referenced. It fits both 2-wheel drive and 4-wheel drive models. It does not fit the...
Recommended Brackets to Insall Reese Fifth Wheel Trailer Hitch in 2004 Ford SuperDuty Short Bed
I have Reese rails and hitch but wonder the best bracket to use to make the install easiest? Thanks | The Reese Quick-Install Custom Bracket Kit # RP50082 are the correct brackets for your 2004 Ford Super Duty. These are custom fit for your...
Can Just Mounting Hardware of Reese Universal Fifth Wheel Rail Kit RP30035 be Purchased
I purchased a used Reese fifth wheel hitch that also included the universal mount. However, I only got one of the four mounting brackets. As there are supposed to be two short ones and two longs ones, Im not sure which one I have it is 4x6....
Will Bulldog 2Speed Planetary Jacks Work With Gooseneck Trailer With Bulldog 12,000LB Single Speed
I have a Gooseneck trailer with dual Bulldog 12,000 LB jacks but they are not 2 speed. Will this unit still work? I notice it has a capacity of 5,500 lbs and I’m assuming that’s why you need the lower gear of the two speed but just wanted...
Recommended 7-Pole Round Plug & Play Wiring Harness Adapter for 2005 Ford Super Duty Factory Wiring
I am in need of PK11720, but I want it in a harness that will plug directly into my factory 2005 F250 wiring. My trailers have the female 7 round pin that need the male pin socket on the truck. I only see the socket on your site. Do you have...
Will a Yakima SkyBox 16 Fit the Rhino-Rack Storage Rack for Kayak or Cargo Box - Wall Mount - RRRWHL
Will a Yakima SkyBox 16 fit on a Rhino-Rack Storage Rack For Cargo Boxes # RRRWHL | I checked the specs on the Yakima SkyBox 16 and it looks like it has an overall height of 15 inches so it will fit the Rhino-Rack Storage Rack for Kayak or...
Fifth Wheel Hitch Recommendation for a Flat Bed Truck to Use Sidewinder
trying to figure out best hitch combination to tow 36ft. raptor toy hauler with CM short flat bed with recessed ball need to get as much offset or setback as I can get . was thinking of replacing king box with a sidewinder #st400-sw19k because...
Filter Your Search
Contact and Help