!V70  x   >   !f-150  x   >   Snap-Loc  x   >  

Will the BWMC2301 biker bar work on a 2016 Harley Ultra Tri Glide trike. it does have a parking brake pedal. This may get in the way of of the clamp. Thnks | It will not; per B&W the Biker Bar will work with Harley-Davidson Tri-Glide and Free...

do screws come with the 3481788-C? | I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer # 3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend...

Can both handles on this cart be made smaller to utilize on the shorter ends of the cart? I notice the video and pictures only show one. Thank you | With the Snap-Loc All-Terrain Panel Cart with E-Track Anchor Points # SL1500PC6R that you referenced...

When bolting track to deck is there any concern regarding dissimilar metals being joined in the process - zinc coated steel onto aluminum? If so, what should be done during installation to minimize the difference? | The zinc plating on the...

what is the length of strap between the cam buckle and e-track fitting? | The lead - the length of strap between the cam buckle and e-track fitting - is 16 inches on the Snap-Loc E-Track Tie-Down Strap w/ Cam Buckle - 2" x 16' - 1,000 lbs #...

Getting ready to install tie downs in an enclosed trailer. Is O-Track comparable to e-track as far as load capacity? Which would be more desirable for tying down a Harley Bagger? | Any of the trailer cargo control systems are only going to be...

I have a 2006 Harley Sportster 883. The front tire measures about 4 inches in width. Will the TWSPWM work with this tire? I also have a 2009 Honda Rebel and the front tire measures 3.75 inches. Will it work with that one also? Thank You |...

I loaded lumber on my trailer and there was no stop on the end of the trailer to keep the lumber from sliding out the end. A flat e track on the end of bed would work if I could slide a 2 x 4 on the end. Is there such a thing? There are no...

I have a Rolo hitch mount bike rack, TX-102. The top tube on my bike is a little wider that the cradle can handle. Do any of the other brand cradles fit on the Rolo rack for holding a bike that might handle a somewhat wider top tube? | Good...

I have a -tail trailer for my trikes. I would like to use a different tie down and saw your etrack system. I was looking at one mount in front and behind the tire not the full length. Question is do I need to run the straps back straight...

Are the 1-1/4inch Snap-Loc E-Track Self-Drilling Metal Screws going to be long enough for my trailer? I have an enclosed trailer that I am going to install 5foot long etracks in the floor. The floor is 3/4inch plywood and then it would go into...

I like the Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2inch x 8foot - 1,467 lbs code SLLS28RER. Can it be used with Erickson Products? Specifically their Erickson Horizontal E-Track - Zinc Coated Steel - 6,000 lbs - 5foot...

Is there a lift/dolly you can recommend for helping to remover the Head assembly when it isnt being used? Thx | Hey Brian, the B&W Continuum Weight Distribution Head Assembly # BW48FR only weighs 52 lbs, so you should be able to easily remove...

Hello, I purchased a whole bunch of e-tracks for my snowmobile trailer and they are awesome of course. Couple questions: any idea on how to keep the snow and ice from accumulating inside of the tracks? We have only had one snowfall so far...

How long is the fixed end length? | I went out to the warehouse and pulled a Snap-Loc E-Track Tie-Down Strap # SLLS28CER to measure the fixed end. The overall length is 9-1/2 inches. If measuring from the end of the buckle though it is shorter,...

where is it made? | The Ratchet Tie Down Straps part # ETBMB-05852 are made overseas but I have a set myself that I keep in my truck and they have worked great so far without any issues. There's also a warranty on the straps so if anything should...

I am setting up a fifth wheel trailer to deliver residential bath vanities. These cannot be stacked for shipment. They are not very heavy. I would like to install E track on the walls and put beam pockets on two by sixs ,and cover them with...

I am looking for something wheeled that I can put my Powerhouse PH2100Phi generator to allow me to wheel it rather than lift it. Do you carry something like that? | You could put your Powerhouse generator on a moving dolly like the part # SL1500DR319-P...

Want to secure a ladder to inside of an enclosed trailer. I have the brackets that the ladder sits on but wanted to secure it to a horizontal etrax above and below the ladder. I was considering part SLLS28CER but it will obviously have a twist...

can this be mounted on and enclosed trailer single swing door | I wouldn't recommend mounting the Erickson # EM77316 spare tire carrier on the door of an enclosed trailer. The carrier is meant to be installed inside an enclosed trailer, and...

My Enclosed trailer has two rows of front to back etrack already installed. Can I use the straps with my existing track and not use the provided chocks? | If you already have four E-Tracks mounted to the floor of your enclosed trailer and you...

Hello good morning.. I have a 5 ton Isuzu refrigerated truck... Im wondering what is the best way to install 18 ft long e track/channels on each side of the truck.. I want to make sure its sturdy and safe so when I strap pretty big loads to...

What screws or hardware is used to secure the etrack since limited access to area inside tailgate? I purchased the e track but unsure how to attach. | Sounds like you are talking about using a single E-Track slot like part # SLSB to instal the...

Can this be installed on the single e tracks or are these only supposed to be used in the long runs? | Yes, you can use the CargoSmart Small Square Hook # CS47FR with the single E-Track anchors: - Black # SLSB - Stainless Steel # SLSS -...