When Should the TorkLift SuperHitch Original Trailer Hitch Receiver Be Used on a 1987 Ford F-250
Is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2inch Receivers - TLF1000inch my best option for a heavy duty hitch for everyday use, but will eventually put a camper on the truck? I would also like...
Will the Flint Hill Goods Cargo Carrier with ramp Part # FHG69ZR Work on a 1987 Ford F-150
will your wheelchair carrier work on a 1987 ford 150 pick up | As long as your 1987 Ford F-150 has a 2" trailer hitch receiver like the Curt Trailer hitch Receiver part # 13028 then yes, the Flint Hill Goods Wheelchair Carrier part # FHG69ZR...
Does Curt A30 Fifth Wheel Hitch Fit Same Rails as A25
Hello, I currently have an A25 fifth wheel on my truck and a friend wants to buy it and I will upgrade to a A30. Will the existing Curt rails need to be relocated or will the A30 right in. Thanks, | The Curt A30 part # C66HR does fit the same...
Can I Upgrade to a 45 Amp AC/DC Converter/Smart Charger
Would you be able to recommend an AC/DC Converter/Smart Charger - 45 Amp. or if need be the entire AC/DC distribution panel and converter charger. This is for a 1992 Ford RV. Please see attached the specs for the electrical panel. Thx for...
Replacement Fan Clutch and Blade For 1984 Ford F-250
Will this fit 460 in my 84 f250 | I may have an option for you but Flex-A-Lite does not have a proper belt driven fan for the 1984 Ford F-250. You will need Derale Thermal Fan Clutch part # D22052 and one of the following fans depending on...
Can a 5th Wheel Hitch be Installed on a Flat Bed Truck
Do you have any universal flat bed 5th wheel bed plates of a 91 f350 | There are specific 5th wheel hitches for flat bed trucks and no installation kits because of how the hitches must install. As an example take a look at flat bed hitch # RP30054....
Best Suspension Enhancement for a 1988 Ford F-350 with In-Bed Hitch
I have airbags Firestone-ride right air on my truck already and the BandW gooseneck I have looks like they cant be used together any help would be appreciated. Please and I thank you for your time. | I do have a suspension enhancement option...
5th Wheel Hitch Fit for a 1987 Ford F-350 with Demco SL Series Base Rails
I have a 1987 F350 Ford which had a SL16 installed. The hitch went with the trailer when sold leaving me with the Base Rails installed. This was the days before a need for sliding the hitch forward or back was needed. Id like to use the Base...
What is the Weight Capacity of the 100 Series 5th Wheel Tailgate for a 1987 Ford F-150
I have a 1987 F-150 that needs a new tailgate. Can the vg-100 handle the weight of someone standing on it when it is down? I ask because when I pick up a load of hay the guys always jump down on to the tailgate from the hay stacks. Thats why...
Can Gen-Y Receiver Plate # 325-GH-724 be Mounted Only Using the Top 4 Holes
I have a 1997 ram 3500 utility body with a lift kit. The truck currently has a bolt on pintle hitch that is mounted to the utility body/truck frame. I am looking to have adjustability or to lower it so i can tow trailers again. Is it possible...
Available Tail Gate Lift Assist for 1990 Ford F-250 XLT Lariat
I need a1990 FORD F250 XLT Lariat tailgate assist kit. Torsion bar OR hydraulic cylinder? which is best and why? do you have them for my truck? Respectfully | Each type of lift assist would have its' own benefits and drawbacks, so it's hard...
Manufacturer of etrailer Hub and Bearing Kit
Can you tell me the Brand name for bearing kit BK2-100? Thanks | The etrailer Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle item # BK2-100 is manufactured by TruRyde. |
Recommended Hitch Plate Bumper for Ford F-350 Cab and Chassis w/ 34" Frames
will this item fit my 86 F350 Chassis cab? Thanks | I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item # 3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want...
Fifth Wheel Rail Kit for 1990 Ford F-250 and Where to Locate Rails in Bed
What kit to mount on a1990 f250 xlt lariot the one we got a few months ago a universal seems to far back on bed we have a long bed Went by instructions for mounting like 21 3/16 not sure information gonefor mounting just dont seem right | For...
Is the Included Mounting Hardware Required to Install Westin Fey Surestep Bumper # 21002-92230
Will this bumper mount to the existing factory brackets on my 1988 F150, or do I have to use the supplied mounting kit? | To install the Westin Fey Surestep Rear Bumper with Custom Installation Kit # 21002-92230 on your 1988 Ford F150 you will...
Where Should Fifth Wheel Rails be Placed in Bed of 1991 Ford F-250
I need measurements for a f-250 ext. Cab full size bed can I get a link for install measurements thanks | When installing the Reese universal fifth wheel rail kit # RP30035 in the bed of your 1991 Ford F-250 you'll need to place the rear rail...
Clevis Hitch and Pin to Tow an Agricultural Trailer
Questions about a pin hitch, not a hitch pin,inch like the kind you find on agriculture trailers and such. Search after google search just makes me want to scream because it always re-directs to a hitch pin. What is the proper way and equipment...
Width Of A Truxedo Soft Roll UpTonneau Cover For A 1987 Ford F-150
distance between outside of rail side to side? | There is no way to get the exact measurement of the TruXedo TruXport Soft, Roll-Up Tonneau Cover Item # TX238101 without having one on hand to measure. I contacted Truxedo to see if they have...
Do All 7-Way Sockets Have Tab to Hole 7-Way Plug in Place
Having to replace socket on my F250 due to the center of the cover with the lug that engages the plug to hold it in broke out. I’m assuming all socket lids have a similar tab to engage the plug to prevent it from vibrating out, but I wanted...
Replacement Tarp for Replacement Tarp for Extang BlackMax Tonneau Cover on 1987 Ford F-150 Long Bed
Which one for 1987 f150 8ft bed with snaps? | I assume you have are asking about an Extang tonneau cover on your 1987 Ford F-150 with an 8 foot bed, and the one that snaps on is the Extang BlackMax Soft Tonneau Cover - Snap On 2515. So long...
Recommended Snowplow and Custom Brackets for 1985 Ford F-250 4WD
Looking to purchase the k2 rampage II Snowplow K2RAMP8219 for my 1985 Ford F250 4WD. What custom brackets do I need to mount on my trucks frame for installation. | The Custom Mounting Brackets for Detail K2 Snowplows # K281516 is the correct...
What Gauge Wire is Used on Tekonsha Brake Controllers?
On the Tekonsha controllers, what gauge wire do they use? Mine is all 10 gauge under the truck but it would be pointless if the controller only uses 14 gauge. Also I have an older brake controller that some one has cut off the flat plastic...
Will the Derale Radiator Race Fan # D17420 Replace the Factory Fan in a 1988 Ford F-250
88 F-250 460CID IS THIS THE CORRECT REPLACEMENT FAN FOR THIS TRUCK? DO YOU HAVE FAN SPACERS AVAILABLE AND HARDWARE? 3inch SPACE I BELEIVE.? FAN SHROUD HAS A 22inch OPENING. WATER PUMP IS ABOUT 5.5 INCHES FROM RADIATOR. I NEGLECTED TO...
Are Buyers Products Parts Made in the USA
Is this one made in the USA? If not do you sell a comparable one made in the US? Can you give me a list of any other pintle hitches you sell with the same bolt pattern as this one? Thanks | I'm happy to inform you that all Buyers Products engineering,...
Filter Your Search
Contact and Help