!V70  x   >   !Light Travel Trailer  x   >   1970  x   >  

I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...

Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...

Hello, im looking for a hitch for my 1970 chevy c10 pickup, with a 8ft bed, and a factory step bumper. Spare tire is mounted under rear of the bed. 500lb tongue and 5000lb trailer being pulled with a weight distribution hitch. | The Class...

What does the small plate that came in the assembly box go? We are having trouble understanding the instructions that came in the box. Thank you | I spoke to my contact at Westin and he informed me that the smaller plates you are referring...

Cant get the Bestop more than half way into the channel. Im struggling with the top should i use a hair dryer to warm up the channel and maybe Vaseline. Thanks | Using a hair dryer on the channel # B51206 can sometimes help make a smoother...

Can you provide some additional info on receiver hitch options that allow the retention of the factory spare tire location under the bed? I have the long styleside bed with standard step bumper. | Modification and/or relocation of the spare...

Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...

Sirs...Could I use one of your 16 trailer tires on a 6 lug, 1970 Chevy K10 truck..Looking for the look of a stock 1970 6 lug wheel but 16 inches.Thanks | Yes, you can use the Dexstar Steel Mini Mod Trailer Wheel item # AM20757 on your 1970 Chevy...

Need item # and price for mount on light ILL29CB and a picture | The Opti-Brite LED RV Dome Light - 500 Lumens - Grommet Mount - 4" Round - Clear Lens # ILL29CB you were looking at gets mounted in a 4" round grommet # A45GB. This will require...

what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer? | The Tow-Rax...

Hello! I purchased airlift part number 60844 for my 1970 Buick Skylark. I am replacing the Buicks original springs with new front and rear coil springs and have a similar question: do the coil springs need to be removed before the airlift is...

Will this change the height of vehicle? thanks | No, the Hellwig Helper springs like the part # HE62FR that you referenced do not affect the unloaded ride height. |

What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |

I am thinking about ordering the Redarc Tow-Pro Elite Trailer Brake Controller for my 1970 chevy c30 with hydroboost and disk brake conversion. I am looking a buying a gooseneck trailer. In the video it says it will apply the trailer brakes...

Timbren REAR kit for 1970 GMC 1/2 ton w/ leaf springs | The correct Timbren rear suspension for your 1970 GMC C-10 is Timbren Rear Suspension Enhancement System, # TGMRC10A, that you have referenced. I have included a link to the installation...

What is the diameter of the holes the cord fits through on this product. Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 | The dimension you are looking for on the Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 is 3/4...

do any of the jerry can holders fit a toyota fj40 spare tire mount? looks like they are only for jeeps. thanks. | I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR...

I have a 1970 Chevy C10 that could use the Timbren rear suspension enhancement but the drawings and photos on your website show the axle bumper mount having a hole in the center. Mine, however have a slot. Does Timbren have a different kit...

What are the dimensions of the spacer tubes? | According to my contact at Reese the four spacer tubes included with their Super Titan 4000 Trailer Hitch # 38208 measure 15-inches in overall length and have a cross section that is 3-1/2 x 3-1/2-inches....

I have a 1970 f100 with the standard chrome rear bumper..not the step bumper ..And I would like the receiver to be located right under said bumper ..Can you tell me what hitch to buy... | For your 1970 Ford F-100 with a standard chrome bumper...

Im putting a CM brand flatbed on my 1970 GMC C30 pickup. The flatbed is wired for a 7 way connector, and I would like to add a trailer brake controller so I can use the pickup to pull my car trailer with electric brakes. What do I need for wiring...

1970 c 10 chevy step side rear crome bumper and brackets | The Westin Fey Diamondstep Rear Bumper part # 21000 is recommended for a 1970 Chevrolet C10. It does not however come with brackets as there are not any for this application but you...

The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...

what is the overall height of the sumo bump stops? | The overall height of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40 is 6 inches. These springs have a weight capacity of 1,000 lbs at 50-percent compression and are made...