Search: Dexter Trailer Lift Kit   >   !TJ  x   >   !Timbren  x   >   Gen-Y Hitch  x   >  

is your best recommendation for a lift hitch? the boat and trailer is about 2700 pounds. Thank you | Product DX33FR. I currently have a UFP A-75 surge brake actuator on an ez loader EZP 20-22 aluminum pontoon...

that issue. The easiest way to lift a trailer is an axle over-under kit like the Dexter # K71-385-00 which | I have a 2003 Keystone Cougar, 27 foot. I have a 5th wheel to gooseneck...

given time. For your trailer, I recommend keeping your Dexter Torflex axles and using the Kodiak Disc | I have a couple of questions I hope you can answer. We are towing a 15,000 lbs 40’ gooseneck trailer...

the B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan Underbed Gooseneck Trailer Hitch Item | How many bolts are required on each side not getting enough bed clearance need to lower it if I do only...

I own an 09 Ram 2500 with an 8inch lift kit and 37inch tires. is there a product available so | I own an 09 Ram 2500 with an 8inch lift kit and 37inch tires. is there a product available so that I can tow...

adjustments, there is always the option to raise the trailer like with the Dexter Trailer Springs Over-Under | looking at this pin box up grade,i am concerned of the height overall of my 5ver....

over bumps and hills. Depending on your suspension we may have a lift kit that will raise | Does the 325-GH-8045 have any height adjustment to help keep the trailer level? I only ask because I have a 2003...

, the Correct Track Trailer Alignment and Lift Kit part # RR23QX is what I recommend as it helps you correct any | GM I just bought the Spartan I installed it and it make my trailer sit in angle...

and Lift Kit item # RR23QX. These attach to your spring hangers and lift your trailer 1-1/4" or 2-1/4 | Hello, Im looking for Dimensions on the Gen-Y GY48GR. I have a 2023...

or this is not enough to level the camper we also have the Correct Track Trailer Alignment and Lift Kit # RR23QX | I purchased this hitch last fall and just had an opportunity to get it installed...

to one with a tall height and still spend less than replacing the pin box. A lift kit for the truck would | What is the best pin box? I have a 2023 momentum 381ms. I could use some extra height. Stock hitch...

receivers like # TLM9011. Your other option if your trailer is nose high is to use an over-under kit | I got the 2k kit and they swapped out the shank for the 7 hole but I’m still not level so can’t tell if...

I have a 2016 FORD F350 with a 8" Fabtech lift. What size should I buy as far as a ball mount. I | I have a 2016 FORD F350 with a 8" Fabtech lift. What size should I buy as far as a ball mount. I like the ones you sell that...

I have a 1997 ram 3500 utility body with a lift kit. The truck currently has a bolt on pintle hitch | I have a 1997 ram 3500 utility body with a lift kit. The truck currently has a bolt on pintle hitch that...

with 4 inch lift kit. the previous adapter I got is too tall to work. | will this adapter fit a potomac 5231 fith wheel? also how tall is it. my truck is a 94 dodge 2500 with 4 inch lift kit. the previous adapter...

have a 2019 f 350 Long bed with a 4 lift kit? I was wondering what amount of clearance is needed | Sirs, would this gen y torsion ball give me enough clearance from the trailer to bed rail. I have a 2019...

it using a kit like the Correct Track Trailer Alignment and Lift Kit part # RR23QX. If you have | I recently purchased a 2021 VanLeigh 370GB that had a Flex Air pin box model...

so that the rear of your trailer lifts up by the diameter of the axle and height of the leaf spring | I have a 22 Chevy 3500 SRW, towing a 15k GVWR Solitude 5th wheel, currently using an Andersen Ultimate hitch....