Recommended Dexter EZ-Flex Equalizers And Leaf Springs For Trailer With Tandem 5200lb Axles
Can you please supply me with the correct part numbers for a suspension upgrade for my 2009 keystone cougar SAB. Iām looking for dexter ez flex equalizer, and leaf springs. The axles are AL-KO T52 3 rated at 5200 lbs The stock equalizer has...
Replacement Double Eye Leaf Spring That Measures Out To be 24 Inches Eye To Eye
Im looking for a leaf spring 24 eye to eye and 1 3/4 wide. | Over time leaf springs flatten out after a constant use. With your spring measuring out to be 24 inches eye to eye The 3-Leaf Double-Eye Spring # e66SR will not work for you. You would...
Can you Tow a Trailer at its Max Capacity
Hi, i l bought a 4x6 trailer at lowes and i am looking to haul a 1800 lbs welding machine on it. My concern is that it is a 10 hr trip it does good on short distance.. | Though you never want to go over the maximum capacity of the trailer, towing...
Can I Remove a Leaf From the Bottom of a 4-Leaf Slipper Spring
should be able to remove the bottom leaf from the 4 to make it a 3 leaf slipper no probs?? | Eh, yeah, don't do that. The weight capacity of the leaf spring will definitely be affected but it will be reduced to an unknown capacity so if you...
How to Find the Correct Replacement Leaf Springs for a 2022 Grand Design 265BH
Have a 2022 grand design 265bh. Looking for new leaf springs. Are SP-222275 the correct one? Will also be doing wet bolt kit at same time. | Hey Eric, the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles # SP-222275 could work but really...
How Far Apart Should Hangers Be on My Custom Built Trailer With 27" Leaf Springs?
What hanger kit do you recommend for leaf spring SP-210275 27ā for use with a single axle 4ā axle, 3500 lbs, 2 3/8 tube mounted over the spring, and what distance do you recommend between the hangars? This is for a trailer I am building. Thank...
Replacement Slipper Spring for Boat Trailer 1000-lb Axle
The spring that I took off of the trailer measures about 25 and 1/4 inch. and 1 and3/4 in. wide, The bolt hole measures 1/2 inch had a 1/2 inch bolt. This looks like the 24 and 1/4 inch slipper spring for 1000 lb axle. It says that the bolt...
Recommended Bolt On Hangers For Aluminum Frame Trailer
I am looking for a bolt on spring hanger kit for a aluminum trailer. The frame is being made out of aluminum box tube . I am going to use a 3000lb axle kit. | Since you've got an aluminum frame trailer, I understand why you're looking for a...
Picking Out 3,500 lb Trailer Axle Leaf Springs for 2002 Bear Single Axle Trailer
I have a 2002 bear single axel trailer with a 3500 lbs capacity. Is there any chance you can help me figure out what leaf spring I need? I can supply the vin if needed. | What you'll need to do is measure your current springs without the weight...
Replacement Slipper Style Leaf Spring for 1984 Tee Nee Trailer
HI I nee to buy two replacement leaf springs for my 1984 Tee Nee trailer. The photo is obviously a photo of the broken spring. I took the dimensions from this spring. The SP-039275 has the right number of springs 3 and weight capacity...
Replacement Leaf Spring For 3,300LB Axle Capacity With 18-1/2 Spring Eye To Spring Eye Measurement
HELLO I NEED A 4 LEAF 18.5 CENTER TO CENTER DOUIBLE EYE LEAF SPRING I WILL NEED AT LEAST TWO DO YOU HAVE THOSE IN STOCK PLEASE | The 3-Leaf Double-Eye Spring # SP-072275 is the closest size we have at 18-5/16" to your 18.5" measurement. If...
Replacement Slipper Springs for 1985 Harding Boat Trailer
Hi. I saw an inquiry similar to this so Im guessing you can figure out the right solution. I have a 1985 Harding boat trailer with 1.75 x 28 4-leaf hook-down open-end slipper suspension leaf springs. Measured center of bolt to end of hook. There...
Should All Trailer Leaf Springs be Replaced at Same Time
I have a 2014 forest river 26dbh patriot edition camper. I am needing to replace at least 2 of my leaf springs. I know my axles are 3500lb capacity 2 3/8 diameter. Is it best to replace all leafs springs for both axles or just one axle? The...
Replacement Slipper Spring for 1973 Tennessee Boat Trailer
Good morning, I have a 1973 Tennessee boat trailer. I need 2 slipper springs. May be able to get buy with one. I have searched for the correct size and tried to make do with a longer one but no luck. The spring I need is 18 1/2 inches from the...
Need a 3-Leaf Slipper Spring Kit for my Boat Trailer with 2 Inch Square Axles
Do you sell a complete kit for my springs on my boat trailer. I have a 2 in. Square axle. There are two leaf slipper springs. 1-3/4 wide. What I like to do is put 3 leaf springs in and do the two u bolts preside like your video. I currently...
How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
How far should should the flat end of a 30 1/4 spring extend beyond the ring with no load on it the frame is upside down now | The flat end of a slipper spring should stick far enough through a hanger to allow for the full travel of the suspension...
Leaf Spring Recommendation to Replace 27 inch Long Spring on Camper with 1,500 lb Trailer Weight
I need to replace the leaf springs on a 1959 camper trailer that I am restoring. The current spring is 27inch former to eye and has 8 leafs. The trailer only weighs approx. 1500#s. Your 27inch spring only has 4 leafs # SP210275, Is this the...
Leaf Spring Recommendation for Canoe Trailer
Hello, I am looking to purchase new leaf springs for my canoe trailer. Breadth between eyelets is exactly 24.5 inches. Will a 25 1/4 fit? I cant find the exact size anywhere. You advertise 24 5/8 with a slip end, but this one is hooked. Thanks...
How to Find Replacement Leaf Spring for 2020 Grand Design Transcend M-247BH
I have a 20/20 Grand design trans end model 24/7bh that Im having leaf spring problems on my trailer I was wondering what weight rating springs I need to replace them with thank you for your time | It looks like your 2020 Grand Design Transcend...
Can the 2 Leaf Spring on my 1977 Boat Trailer be Replaced with the 3 Leaf Spring # WIF3
I have a broken 2 leaf spring on a 77 boat trailer would like to put on the 3 leaf spring WIF3 for 3000 lb axle rather than the SP-038275 for 2000 lb axle. Would that be wise? measurement for the broken spring are 31 and a half so thats the...
Replacing 6-Leaf Springs on 12K Axles with 7-Leaf
I was wondering I can replace the 6 leaf spring on my 12k dexter axle trailer with a 7 leafs spring part # SP-270275? Both are 3 inch leaf spring. Also is it necessary to replace the U-bolt, if so what is part number for them? As per the measurement...
Difference Between Amount of Leafs in Slipper Spring Packs for Trailer Suspension
Hello, I am building a trailer and will be equipping it with 2000 pound rated slipper Springs. My question is are there characteristic differences in lengths and or quantity of leaves in the springs available? | Some people prefer spring packs...
Recommended Hanger Kit For A 6 Leaf 5,300 Pound Double Eye Spring
What hanger kit would I need for double axle if I order the 6 leaf spring double eye spring 5300lb and will these work on a 3 inch axle | The correct hanger kit you would need for The 6-Leaf Double-Eye Spring for 5,300 pound Trailer Axles -...
Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
Hello, I need a ubolt kit to go with SP-210275 Springs. I have 1.5 square axles. The current square ubolts are 4.5 in length. I started to purchase 115983 and individual ubolts but wanted to know if you offer a kit instead. Thank you. | Hey...
Filter Your Search
Contact and Help