Need a 3-Leaf Slipper Spring Kit for my Boat Trailer with 2 Inch Square Axles


Do you sell a complete kit for my springs on my boat trailer. I have a 2 in. Square axle. There are two leaf slipper springs. 1-3/4 wide. What I like to do is put 3 leaf springs in and do the two u bolts preside like your video. I currently have the one u bolt. Can you hook me up with the complete kit? ASP. Thank you


Helpful Expert Reply:

In order to determine which 3-leaf slipper springs will fit, you will need to take a few measurements of the current springs on your boat trailer. I am including a diagram that shows which measurements are needed. The diagram also includes the measurements of the two 3-leaf springs that we have available. Compare your measurements to those to see if we have a match.

3-Leaf Slipper Springs for 1,500 lb Trailer Axles, # SP-178275
3-Leaf Slipper Springs for 3,000 lb Trailer Axles, # SP-039275

Although we do not sell everything in a kit, the 2 Inch U-Bolts, # SP01-160, and the U-Bolt Plate for Square Axles, # 117594, are what you need. Keep in mind that all of these parts are sold individually so you will want to order a quantity of 2 to complete both sides of the trailer.

Another recommendation would be to replace the Shackle Bolt, # TRFA73Z916DLNZ. Over time these typically become rusted and corroded.

I have included a couple links that may be of help to you.

Click to Enlarge
helpful expert reply by:

Ask The Experts a Question >>

Products Referenced in This Question

Product Page this Question was Asked From

Similar Expert Q&A Pages

See More Q&A Expert Answers >>