What is Needed to Install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System
I am interested in Hopkins Smart Hitch Backup Camera and am wondering if there is any thing more I need to install this in a 2012 f350 super duty truck? | The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 comes with...
Disc Brake Kit Needed for a 2015 Cyclone 4200 with Triple Dexter Axles
I have 6k Dexter axle s/n 131071645 dex#: 1852900, Dexter axle: 046718 i want complete kit for 7k axles with disc brakes please provide part numbers and price? Actuator is for a 2017 f350, 6.7 lariats dully 4.10 differential | I reached out...
Troubleshooting No 12V Power on 7-way Wiring on 2000 Ford F-350
What need to do get 12v working. No 12v on my plug ford 2000 f350 just added fifth wheel wiring kit | If the 12V power circuit on your original bumper-mounted 7-way trailer socket on your F-350 worked before you installed the 5th wheel harness...
Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
Hi I was wondering if you could suggest a good backup camera I have a 2016 ford f250 xlt crew cab it has the self dimming mirror is there a kit with camera and a mirror I can buy like a plug and play Im sure theres pig tails on the wire harness...
Will Ford 5th Wheel Brackets 50043 Fit Older Reese Rails on a 2003 Ford F-250
Will these ford brackets work with a Pro Series 15000 fifth wheel hitch and rails my buddy sold me? For my 2003 F250 Super Duty extended cab? | Yes! I can tell by the picture you have provided that the rails are industry standard, 10-bolt rails...
Ride-Rite Air Bags Needed for a 2001 Ford F-250 with B&W Gooseneck Hitch Installed
I am wondering which firestone ride rite or air lift air bags would fit on 2001 ford 250 6 ft bed with a bandw gooseneck hitch ? | The Firestone Ride-Rite Air Helper Springs that you are looking for is listed as part # F2550 on our site. These...
Options for Correcting Sag on 2010 Ford F-350 Hauling 48 FT Haulmark Gooseneck Trailer
I have a 2010 Ford F-350 DRW Crew Cab 4x4 that I haul a 48ft Haulmark enclosed gooseneck trailer. My question is when hooked up my rear axle weight is is anywhere from 8,000-8,900lbs and all though ive never measured it ive noticed that my...
Are Spacers Needed to Install Timbrens on Vehicle with Leveling Kit
For a 2004 F250- I am looking to purchase a set of timbrens part # TFR250SDE. My truck rear wheel well measures out at 44.5. In the video on your website the f250 measures out at 40.75. My truck has a leveling kit on it and I want to make...
Front Axle Suspension Kit to Reduce Impact on Factory Jounce Spring on 2014 Ford F-250
I have a Ford F 250 2014 4 wheel drive I do not have equipment on the front I do pull about 5000 pounds on the back I am installing Firestone ride-rite on the back I Drive over speed bumps to leave and come home every day I want to install these...
Custom Fifth Wheel Install Kit Recommendation for a 2008 Ford F-250
will the reese rail kit rp50073-58 fit on my 2008 f250 super duty with short bed | I have a similar custom fifth wheel rail kit that has been confirmed to fit your 2008 Ford F-250, but the part # RP50026-58 fits newer Ford trucks than yours...
Brightest Interior Trailer Light Recommendation
I would like to change out my existing over head trailer dome lights with led ones so they are brighter. What are the brightest ones you carry? | For maximum brightness out of an interior trailer light I would go with the part # ILL08COB. The...
What is the Gear Reduction of the 12-Volt Motor Kit for Ram Landing Gear
Like the Q and A question of Kris L.inch I would like to apply this motor kit to another application. If I can get the output rpm of the unit, not motor speed, or the gear reduction and motor speed as given, I can compute the actual output speed...
Mounting Hole Spacing on Chrome Grab Handle # GH12-713
What is all the hole spacing on GH12-713 grab handle? | The hole spacing on the Steel with Chrome Finish Grab Handle, # GH12-713, is 10 inches center to center on the inner holes and 12 inches center to center for the outer holes. I have included...
7-Way and 4-Way Combo Recommendation for a 1999 Ford F-250 with 4-Way
99 F250 Super Duty- I want to use something like Part #:HM40975 but need a wiring harness like Part #:118243 that will plug in without splicing wires. Dont see a part that fits my needs... | It sounds like your 1999 Ford F-250 has a factory...
Vent Cover Availability for Older Trailer
I cant find a ventline elixir vent cover with the same hing. It has gaps in it. not solid and the ones that have gaps are in a different place. It is on a 1989 chinook motor home that I am in the process of restoring. | Check out the picture...
RV Propane T-Fitting to Run Stove and Grill at the Same Time
Hi, I just purchased a 5th wheel with a LP line to the rear outdoor kitchen, which has a female quick disconnect on it. Whats the best way to run 2 appliances, each with their own regular. I dont see a dual outlet male /2 female QD tee on...
Disc Brake Kit Availability Compatible with the Dexstar Conventional Steel Wheel # AM20766
I am looking for a rotor/caliper combination that works with the AM20766 wheel. What truck or trailer disc brake setup works with this wheel? | The Dexstar Conventional Steel Wheel # AM20766 has an 8 on 6-1/2 inch bolt pattern. To see a list...
Parts Needed to Install 7-way and 4-Way Connector in 2001 Ford F-350
I am looking for a tow package wiring harness for my 2001 Ford F-350 V10. I found the Ford Replacement OEM Tow Package Wiring Harness, 7-Way Super Duty with code 118243 which has the correct connection but I was wondering if you have one that...
Recommended Hitch Receiver Reducer for 2017 Ford F-250 with 3 Inch Hitch to Blue Ox Sway Pro System
Hello. I just realized last night I forgot to put the pin in the factory F250 reducer sleave and lost it somewhere on the road. Im looking for a replacement, that would reduce it from the 3inch receiver and fit my Blue Ox Sway pro system....
Installing Redarc Tow Pro Brake Controller in 2013 Ford F-250 with Factory-Installed Controller
Will this Redarc Tow-Pro Elite #331-EBRH-ACCV2 replace existing factory installed controller on a 2013 Ford F-250 | Yes, you can replace the factory-installed trailer brake controller in your Ford pickup with a superior aftermarket unit like...
Parts Needed to Upgrade the Dacromet Calipers of # K2HR526D to Stainless Steel Calipers
I have a set of 12inch Kodiac disc brakes K2HR526D. Im planning on replacing the calipers KDBC225DAC with stainless steel calipers. KDBC225S. Since the original brake kit was designed for regular calipers is there an issue? For instance do I...
Recommended 6-Point Landing Gear Leveling System for Trailers
I have a 2017 Forest River Blue Ridge Cabin Edition 3780LF. It’s max weigh is 16600 LBS. I Want to replace the stock landing legs with a 6 point self leveling system. Which system would you recommend? | The Lippert Ground Control 3.0 Electric...
Camper Tie Down Recommendation for a 2006 Ford F-350 Dually
Will the Brophy stake pocket #HDSF fit my 2006 F-350 Dually | The # HSSF should work well as a tie down system for your 2006 Ford F-350. But you may want to check out # TDSF to see which would work better for your application. I contacted...
Roof Rack Recommendation for a 2015 Scion xB
I have a 2015 scion xb i been looking for permanent custom mount roof rack system i seen the thule and yakima permanent rack system which both of them used flare nut do u think the rhino will be work on metal roof thanks | I would strongly...
Filter Your Search
Contact and Help