Ball Mount Recommendation for a 2016 Ford F-350 with 2-1/2 Inch Trailer Hitch
I have a 2016 Ford F350 diesel with a 2 1/2 inch receiver. My main trailer I will be towing is a 3 horse slant with a empty weight close to 4000 pounds. The measurement from level ground to the bottom edge of the trailer coupler is 17 1/2...
Fighting Sway From Wind With Light Weight Enclosed Cargo Trailer
I just purchased a new Interstate 6foot x 12foot enclosed cargo trailer my first trailer ever. Im trying to get educated about safety. Its a single Dexter axle, with brakes and the Tekonsha P2 brake controller installed in the truck. Pulling...
Does The Weigh Safe 180 Hitch 2-Ball Mount Rattle When In Use?
Does this have any play in in? I hate rattles! | The hitch balls of the Weigh Safe 180 Hitch 2-Ball Mount # LTB10-25 have slight play but would not be the cause of a noticeable rattling noise. The most common rattle would be not using an anti-rattle...
Recommended 7 Way Trailer Connection to Fit a 2009 Porsche Cayenne
I have a 2009 Porsche Cayenne which came with the factory installed trailer hitch but does not have the seven connector female plug-in. It has a block off plate secured by four screws. Apparently US customers are supposed to purchase the appropriate...
Adjustable Ball Mount for 2.5 inch Hitch with Longer Shank
Compare weight with steel hitch. I have a toyota sequoia with a rear lift gate and need a long shank hitch to open the gate and clear my trailer. Can the shank length be chosen? | If you are looking for an adjustable ball mount that fits a...
Distance from Hitch Pin Hole to Back of Vertical Shank on Weigh Safe Ball Mount # LTB8-2
What is the shank length on this model? More specifically, what is the length of the centerline of the farthest/longest hitch pin hole to the front edge of the drop? I need something that will clear the front edge of my aftermarket Ranch Hand...
Will the Gen-Y Anti-Rattle Work with Weigh Safe Ball Mount?
Will this work with a Weigh Safe WS8-25? The shank has very little room from the end of the receiver to the bend in the hitch. | The Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers # 325-GH-063 will work well as long as you have the between...
Ball Mount to Use with Weigh Safe Stainless Steel Hitch Ball with Built-In Scale WSUN-1
I purchased your ball with bilt in scale,it does not fit my hitch which is 1 inch thick,will this hitch fit? | The Weigh Safe Stainless Steel Hitch Ball with Built-In Scale # WSUN-1 requires that the ball mount it is used with has a 3/4-inch...
Ball Mount Recommendation with 4 inches of Drop and Platform Thickness of 3/4 inch
Im looking for a tow ball mount to fit my Nissan Titan. My titan receiver to top inside of receiver measures 23 inches high. My 17foot Casita Deluxe coupler measures 19 1/2 inches to bottom of coupler. So I guess I need a tow ball mount...
Determining What Ball Mount Drop is Needed on a GMC Denali With a 8-1/2 In Lift and 37 in Tires
I HAVE A DENALI HD WITH A 8.5inch LIFT AND 37inch TIRES. THE HEIGHT TO THE TOP OF THE HITCH IS 27.75. WOULD I NEED AN 8DROP OR 10inch DROP? | You will need to measure both the hitch height on GMC Denali and the trailer coupler height of your...
Is Platform of Andersen Adjustable Ball Mount Lockable
Question, can I put a lockable pin where adjusting is being done? Second question, say I only use a 2” ball can I get just the 2” ball without the other ball? Thanks | We have a lock kit that will give the Andersen Adjustable ball mount part...
2-1/2 inch Adjustable Ball Mount Recommendation for Use with a Rock Tamer Mudflap System
Will the 2.5 rock tamer work with a 2.5 6 in weigh safe hitch? | Yes, the RockTamers Mudflap part # ERT00110 would be compatible with the The WeightSafe 2-1/2 inch ball mount # WS6-25 that you referenced. We had a customer come back and tell...
Is There A 3 Receiver Tube Opening Version Of The Weigh Safe 2-Ball Mount # WS10-2
I have the new Denali that has a 3inch receiver, do you make one with the 3inch hitch? | We unfortunately do not carry a version for the Weigh Safe 2-Ball Mount w/ Built-In Scale - 2" Hitch - 10" Drop, 11" Rise - 10K # WS10-2 for a 3" receiver...
Ball Mount to Fit a 2-1/2 Inch Trailer Hitch Receiver with 6 Inches of Drop
I am looking for a 6 inch drop, 2.5, 1200 lb tongue weight, 12000 lb tow weight ball mount with a securing pin to ball mount center of hole dimension of 12inch or as near as possible. Would prefer aluminum but would work with steel if that...
Replacement Stainless Steel Hitch Ball for Solid-Tow Adjustable 2-Ball Mount
Will a stainless TB03 ball set swap onto a DTSTBM6407 solid tow hitch? want the stainless ball setup thanks | I do have a stainless steel ball mount option for your Solid-Tow Adjustable 2-Ball Mount part # DTSTBM6407, however, the Dual-Sided...
Ball Mount With Single Hitch Ball And 10 Inch Drop Compatible With 2 Inch Reciever
If I use the 10inch , the bottom ball would be about 6inch from the ground. Do you make a single ball instead of the double ball? I would feel more comfortable having the extra distance. Thank you | For a similar style to the # FA49-00-5900...
Why Won't a Hitch Ball with Built-In Scale Work with a Weight Distribution System
Looking at the 2 5/16” Weigh Safe hitch ball built in scale and this weight distribution system. Reason being is that I have Ram 4 corner air ride with auto level. The ram will level out after this hitch is installed lifting the rear, transferring...
Availability of Adjustable Ball Mount with 1-7/8 Inch and 2 Inch Hitch Ball
I DO NOT NEED THE 2 5/16 BALL. CAN I CUT IT OFF? HOW HARD WOULD IT BE FOR ME TO BUY A 2inch X 17/8BALL? | I do not recommend cutting off the 2-5/16 inch ball portion from the dual ball unit included with the Weigh Safe 180 Ball Mount # LTB6-2....
How Do You Know If You Need Sway Control on a Trailer
I have moved up from a Tundra to a 2017 F350 pulling a 28, 6000# Travel Trailer. I kept my Equal-i-zer WD hitch, but dont get much squat now with the F350. I despise the 3inch Reciever and sleeves so I was thinking about the 3inch Weigh Safe....
Ball Mount with 8-Inches of Drop for Use in 2-1/2-Inch Hitch
I need a 2.5inch ball mount with an 8inch drop. Im towing a 3500# 24foot enclosed cargo trailer. Probably total weight loaded is 5000#. Can you recommend a safe and proper product for me? Thank you! | We can offer you a choice of fixed and...
Recommended Trailer Tongue Weight Scale for Precise Measurements and Convenience
Hi. Im interested in the Sherline tongue scale. Do you also sell the 1000# pound capacity unit? It would probably be more accurate for lighter trailers. Steve Kight | The etrailer Trailer Tongue Weight Scale - 2,000-lb Capacity # e99044 is the...
Which Ball Mount Needed for 20111 Silverado with 3-1/2 Inch Lift
Question recently bought a truck with 3.5 lift want to buy a trailer hitch that fits my camper hitch with stabilizer s on it any recommendations | The hitch height of a truck can vary widely according to the tire sized used and the presence...
How to Determine the Correct Trailer Ball Mount and Measuring For Rise and/or Drop
I do not own a trailer, but have had to borrow on ocassionally. How do I choose a mount and ball size? Are there standard coupler heights and ball sizes? example: I had to borrow a trailer to take Motorcycle to dealer, probably a class 3...
2 Inch Trailer Hitch Recommendation for a 2001 Ford F-250
I have a 2001 Ford F250 superduty with a Reese V-5 hitch that was on it when I purchased in 2007. The side plates are rusted and looking at above hitch. I was hoping to purchase side plates but you dont carry Reese. Will the BWHDRH25230 be a...
Filter Your Search
Contact and Help