How Can I Transport My 320 Sport Bike on My 2013 Hyundai Santa Fe?
Hi, I have a 2013 Hyundai Santé Fe Sport with the standard 1 1/4 hitch. I would like to carry my 320lbs dual sport bike on a hitch hauler carrier like this. I would need to change the factory hitch for a class 3, so would this one be a good...
Recommended Wheel Chock Placement for Motocross Bikes in a 6x12 Single Axle Enclosed Trailer
Im looking to buy two wheel chocks from you guys and want to know what is the best placement in the trailer? 6x12 single axle... would be carrying two motocross bikes. Should both chocks be set towards the front or one front and one middle of...
Equipment Needed to Secure a 2003 Honda VTX 1800R for Travel
Does this Biker Bar Tie Down System fit my 2003 Honda VTX 1800R? If not is there another model that fits?? I was at Americade last week and saw a similar system for Harleys but they didnt know if it would fit my bike?? | The B&W Biker Bar systems...
Mounting Hole Spacing of Tow-Rax L-Track
What is center to center measurement on the mounting holes? | The mounting holes of the Tow-Rax L-Track # TWSP1DTAB measure approximately 1 inch from center-to-center. I have added a link to a video review for you to check out as well of the...
What Replacement End Caps Do I Need for My L Tracks?
Hello, I am trying to source some end caps for some regular style L tracks, but not sure what size I need. If I send a picture could someone help me? | If you have regular-style L-tracks, your best bet for end-caps is the Tow-Rax End Piece for...
Need Replacement Mounting Hardware for the Tow-Rax Removable Wheel Chock w/ Wood Screws TWSPWC
Can I order the Mounting hardware separate? TWSPWC | The replacement hardware screws that come with the Tow-Rax Removable Wheel Chock w/ Wood Screws, part # TWSPWC, are listed as part # TWSPWFKW. If you need to mount the Tow-Rax Removable...
What Is Weight Of Tow-Rax Wall Mounted Folding Table And Hardware
what is the total weight of this table, including mount kit? | The Tow-Rax Wall Mounted Folding Table, part # TWSP45HFTA weighs 20-lbs. The mounting buttons and screw kit, part # TWSP30BK has a shipping weight of less than 1/2-lb. |
Tie Down System To Secure A Large Motorcycle For Travel
is this tie down system strong enough to be used on a trailer for the purpose of securing a large motorcycle for travel? | Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1 # TWSP72TA. This system...
E-Track Spacing Recommendation for Securing a Harley To a Utility Trailer
Hi, I have a metal 5 x 10 Ft utility trailer with a wooden deck pressure treated planks. I plan to purchase 2 - 5 ft ETracks and hardware/staps etc. My 2014 LowRider is a bit less than 8 feet in length. I plan to install the track to accomodate...
Is Installation Hardware Included with Tow-Rax Wall Mounted Folding Table # TWSP45HFTA
In the bullet points under the Features sections it states, Mounting buttons TWSP30BK - sold separately... Does the table TWSP45HFTA come with mounting buttons and screws? If so, how many? Or does the hardware need to be purchased separately? Thanks!...
Carrying a Kawasaki KLR250 Motorcycle in a Trailer
My bike has broken down and I need to tow it to the repair shop. Will Kawasaki KLR250 fit in a 6 ft x 4 ft trailer? | From my research your Kawasaki measures over 7 feet from end to end. Depending on the style of trailer you might be able to...
Compatibility of Tow-Raxs Strap Track with J-Hooks on Cargo Tie-Down Straps
Hi, my straps use the double wire or “j” hooks. Are the rack slots wide enough for them? | The Tow-Rax Strap Track - Aluminum - 26" Long - Machined Finish # TWSP26AST will allow you to use J-hooks like utilized on most ratchet straps. These...
What is the Most Narrow Width Motorcycle Wheel Chock Available
Hi - does this come in narrower widths? The maximum width I need is 5 Thanks Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2 Wide Tires - Tubular Steel - Black Item # TWSPWM | I may have a solution for you, but the Tow-Rax Removable Wheel...
General-Purpose Trailer-Mounted Motorcycle Transport Systems
I have a 2010 Yamaha Stratoliner Deluxe, will this system or do they have a model that would work with my bike | B&W makes their Biker Bar motorcycle transport systems, such as # BWMC2301, just for hogs but we do have other setups for cruiser...
Motorcycle Wheel Chock that Can Be Removed When Not in Use
I need a quality chock. But, it needs to be easily removable if I only use it in the summer to haul my bikes? Off season my trailer hauls manure and mulch. Suggestions/thoughts? | We have a motorcycle wheel chock that is easily removable...
Is Tow-Rax Aluminum Folding Table Corrosion Resistant for marine Environments
for boating use transom application, how will this product hold up to rust/elements while stored permanently outdoors in a salt water marine environment? | The Tow-Rax folding table # TWSP45HFTA is made of aluminum and has aluminum hardware...
Recommended Mounting Hardware for Tow-Rax Low-Profile Floor Track # TWSP72TA On Aluminum Trailer
Which aluminum screws or locking bolts type, length, etc would you recommend to secure the floor track to my 6x10 ft aluminum trailer. I have 5 molded hollow aluminum beams under the trailer bed and will try to tap into some of them? I am...
What is Actual Weight Capacity of Tow-Rax Wall Mounted Folding Table # TWSP45HFTA
In your Q and A section that is along side of this text box for part #twsp45hfta one of the questioned asked is What is weight capacity of this folding table in the upright positioninch The question is answered by your Adam R. who states the...
Can the Tow Rax Folding Table part # TWSP45HFTA Mount to the Outside of a Trailer
Could this be mounted on the outside of a travel trailer ? | You could install the mounting buttons of the Tow Rax Folding Table part # TWSP45HFTA that you referenced on the outside of a travel trailer. But due to its design that allows it to...
What is the Center to Center Hole Spacing to Mount Tow-Rax Wall Mounted Folding Table TWSP45HFTA
My trailer has 16inch wall studs, will the mounts on this table matchup? | The mounting holes on the Tow-Rax Wall Mounted Folding Table # TWSP45HFTA are 32 inches apart on center. This means that 16 inch stud spacing will be perfect. One side...
What is the Weight Capacity of the Tow-Rax Folding Table
How much weight can it hold? | The Tow-Rax folding table # TWSP45HFTA has a capacity of 100 pounds. However, it also depends on what it is mounted to. For example if the table was attached to something like drywall it might not be able to even...
What is the Weight Capacity of Tow-Rax Aluminum Wall Mounted Folding Table
How much weight will it handle | I spoke with my contact over at Tow-Rax and the wall-mounted folding table has a working load capacity of 100 pounds. I have linked the video review of this table for you as well. |
Does Tow-Rax Wall Mounted Aluminum Folding Table # TWSP45HFTA Lock When in Folded Position
Does Tow-Rax Wall Mounted Aluminum Folding Table Lockinch in the folded position, or is it free hanging? | The Tow-Rax Wall Mounted Aluminum Folding Table # TWSP45HFTA does not lock in the folded position. I confirmed this with my contact at...
Does Tow-Rax Wall Mounted Folding Table # TWSP45HFTA Lock in Folded Position
How much weight is this designed to support? Does it lock in the STORED position? | The Tow-Rax Wall Mounted Folding Table # TWSP45HFTA has a weight capacity of 100-lbs and when folded down in its storage position it hangs freely and is not...
Filter Your Search
Contact and Help