Can Fulton Economy Spare Tire Carrier be Mounted Under Tongue
Can it be mounted hanging underneath the tongue as well? | Yes, if you want to mount it under your trailer tongue you could do that with the Fulton Economy Spare Tire Carrier # FETCLB0201. This will fit a trailer frame/tongue up to 3" wide...
Replacement Pull Pin for Fulton F2 Swing-Up Jack
need a pull-pin for my f2 can you help | Yes, the Replacement Pull Pin Kit for Fulton F2 Swing-Up Jacks part # F500136 which is for the Fulton F2 Swing-Up Trailer Jacks like part # F1413040134 is available for you. |
Distance from Bottom of Mounting Plate to Foot on Fulton Marine Jack
When the jack is retracted all the way up, what is the minimum distance from the bottom of the mounting plate to the ground? Thanks, | I measured the distance from the bottom of the mounting plate to the bottom of the foot on the Fulton Marine...
Can Spare Tire Carrier be Used Under Trailer
Can this be mounted upside down underneath a trailer? I realize it would be tough to access, but a nice way to carry a spare tire, you hopefully, wouldnt need. Also, how many mounting holes are drilled around edges and what is the hole size? Thank...
Can Dutton-Lainson Hand Winch DL14881 be Used with a Strap
Can I use a strap instead of a steel cable with this winch? | Dutton-Lainson Hand Winch, TUFFPLATE Finish, Two Speed with Direct Drive - Hand Brake - 3,500 lbs. Item # DL14881 is designed for use with a wire rope only and not a cable but we...
Is There a Replacement Wheel Bracket for the Fulton F2 Swing-Up Trailer Jack
So i was pushing a trailer and i broke the wheel casing off the end of my jack. The wheel is ok, but the mounting case for the wheel is broken. Can i replace that part or do i need to get a new jack? | The wheel housing is not replaceable on...
Can the Fulton 15 Inch Trailer Fender Be Used With 14 Inch Wheel To Provide More Clearance
Our boat trailer has 205/75 R14 tires. I bought the fenders just like this but for 14” wheels and they didn’t fit. When the fender is resting on the mounting bracket the bracket supporting the side step like it should be the top step is literally...
Trailer Jack Recommendation that Can Fit on Shelby Jack Pipe Mount
I have a 16 foot Eagle boat trailer that has Shelby Swivel Jack with wheel. The tube the hand crank is on Measures 16” and the to of the wheel bracket to bottom of wheel measures 6.5”. Trailer has welded bracket and swivel jack I’d held on by...
How to Choose a Hand Winch for a Tow Dolly
Hello. Im interested in purchasing the Fulton F2 winch. Can this winch be mounted on a tow dolly to pull cars onto it ? If so, do you sell mounting brackets for it ? I have a acme tow dolly with 3inch x 3inch bar for mounting. Thank you. |...
Could Fulton Single Axle Trailer Fender F008595 Be Made To Work With 16" Wheels?
I measured the current part and it measures 45inch long and looks very similar to this part F008595. The tires single axel currently look pretty tight inside the wheel well. Do you think this will handle my tire size? | The Fulton Single Axle...
Replacement Black Fender for 2015 Tracker Trailstar Trailer
I’m looking for a 2015 tracker trailstar trailer fender for the right side. Black single axle. | We offer a number of black plastic replacement trailer fenders from CE Smith and Fulton that work as general-purpose replacements. All appear on...
Fender Mounting Brackets that have a 2-1/2 Inch Hole Spacing to Mount Fender F008569
I want to order and mount these fenders F008569 on my trailer. I see where the centerline hole-to-holeinch bracket requirement for mating up a bracket to the fender is 3 inches. I will be using square U bolts to hold them to my 2 inch trailer...
Replacement Fender for 1990s Shorelandr Trailer
I lost a fender on my shorelandr trailer from the mid 90s. Not sure of model. Holds a a 16ft alumacraft. Has 12inch wheels, but good size fenders, 39inch x 9inch with 2 8inch steps. The mounts are 27inch apart. Id like to do little to no...
Replacement Handle for Fulton Round Swivel Marine Jack # FTJ12000101
Hi, do you sell just the handle assembly. Mine is corroded, and doesnt spin when I try to lower or raise jack. | We do have the replacement handle kit for your Fulton Round Snap-Ring Swivel Marine Jack # FTJ12000101 with part # F0933305S00....
Fender Bracket to Use with Fulton Fenders # F008584
Is the CE26098G the correct bracket used to install Fulton F008584 14inch fenders? | Yes, the CE Smith brackets # CE26098G-2 are the best option for mounting brackets to use with the Fulton Fenders part # F008584 that you also mentioned. |
Replacement Fender for 1997 Trailstar Trailer With 13 Inch Wheels
We need to replace fenders for 1997 trailstar trailer with 13” wheels single axle. Has triangle side steps that bolt on Any suggestions? | For replacement fenders for your 1997 Trailstar trailer I recommend the Fulton Single Axle Trailer Fender...
Should Longer Safety Chains be Used With B&W Extend-A-Goose Gooseneck Coupler
I bought your B&W Extend Goose coupler. Will I need longer safety chains to make a tight circle? If so, what is approximate length of chain I will need? An extra 10 ? Thx! | Thanks for the purchase! And the answer to your question is yes,...
Will Fulton Bolt-Thru Swivel Marine Jack Swivel to Position With Bracket Turned to Side
Im looking at Item # FXP15L. The bolt pattern on my trailer is 4 1/2 wide x 5 1/2 high. I would have to turn the bracket on its side to fit my trailer. Would this jack swivel to the position I need? Thanks | The bolt-on Fulton Bolt-Thru Swivel...
Thickness of Replacement Fulton Winch Handle
How wide and thick is the handle | The 11-inch-long Replacement Handle for Fulton Hand Winch # F501110 measures approximately 1/4 inch thick. I have added a link below to a video review for you to check out of the Replacement Handle # F501110. |
Correct Replacement Ratchet Repair Spring for Dutton-Lainson Hand Winch DL2500A
I bought the kit for dl2500a but only used the spring. Wondering if this can be used for that winch? | The Replacement 2-Speed Ratchet Spring for Fulton Hand Winches part # F86ZR is indeed correct for the Dutton-Lainson Hand Winch DL2500A part...
Does Fulton High-Performance 2-Speed Winch # F142412 Include Strap
does this come with a strap? | The Fulton High-Performance 2-Speed Trailer Winch # F142412 that you referenced does not come with a strap. It is compatible with a 2 inch wide strap and the drum can accept a strap length of up to 20 feet. With...
Recommended Replacement For Fulton Snap-Ring Swivel Trailer Jack
Hi, need a replacement for trailer jack, Old one was welded on. I have removed the jack with the retaining ring. Old opening is about 2 5/8” diameter. I can send pics if that helps find a replacement. Thanks | Thanks for the photos,...
Upgrading to 12 Inch Wheels/Tires On a Sea Lion Trailer
The last time I asked a question yall had a great answer for me it was super detailed and very helpful. So once again I come to you to ask what is the largest size radial tire you can put on an SK 10 800 sea lion trailer? Conner said i could...
Dimensions of the Fulton Single Axle Trailer Fenders with Top and Side Steps for 15 inch Wheels
Hi. I would like to verify a dimension on your spec drawings for this item. Dimension B shows 6.7, but on the 13inch wheel version its 7.7, and on the 14inch wheel version its 8. So, I think its a typo, probably 9.7???? Please have someone physically...
Filter Your Search
Contact and Help