Replacing Suspension Components on Old Motorcycle Trailer
have an old motorcycle trailer want to put on new springs 2 in wide by 34 in eye to eye do not seem to find anywhere | It will be time to update your suspension on you motorcycle trailer. Current leaf springs for trailers are all 1-3/4" wide....
Replacement Slipper Springs Measurements and Different Ends
slip 34.5X2.5spring 6 leaf need 1 spring | I have included a picture below as measurements for slipper leaf springs are different than double eye leaf springs. A=Eye center to Spring Pin length B=Eye center to end of spring C=Eye center...
Recommended Jet Ski Trailer Leaf Spring U-Bolt Mounting Kit for 1-1/2 Inch Square Axle
Hello , I am looking to replace both my leaf springs on my jet ski trailer I determined that SP-113275 will fit , but I cant seem to find a square U bolt that will. My axle is 1-1/2x1-1/2 and the square you bolt is about 4 inches long and the...
What Size Bolt Is Needed for the 4-Leaf Slipper Spring 3,700 Lb with Flat End
looking at item # sp-040275can you tell me if the eye hole will accepta 3/4 inch bolt? | The 4-Leaf Slipper Spring w/ Flat End part # SP-040275 is designed for 9/16" bolts only, the Spring-Eye Bolt with Locknut for Slipper Springs part # 166079....
Torque Specs for Attaching Leaf Springs
What’s the torque spec on the bolts attaching these leafs to the trailer and shackle? | You will need the U-Bolt Kit item # APUBR-1 to use the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long item # SP-210275. The kit uses 1/2...
Will Trailer Axle Replacement Allow for Increased Trailer Weight Capacity
I want to replace the 2 3500# axles on our travel trailer with 2 5200# axles. Hub face to hub face is 85, with 24 3/8inch eye to eye spacing and 55inch overall length of both springs on each side including the equalizer. Do you have a set...
Can Bottom Leaf be Removed When Replacing 3-Leaf Slipper Spring with 4-Leaf Slipper Spring
if my trailer has a 3 leaf slipper can i take the bottom leaf of a 4 leaf and be basically the same as the 3 | You can easily replace a 3-leaf slipper spring with a 4-leaf option like the Universal Group Slipper Spring # SP-040275 that you referenced....
2016 Coachmen Clipper BH17 Replacement Leaf Spring Suspension Enhancement
Hi - not sure if this is the right place to ask this question... if not, can you please redirect me to the appropriate place. I tried calling etrailer.com but gave up after firstly not finding an option for technical questions and then being...
Bushings for Slipper Spring with 1/2-Inch Inner Diameter
I am interested in 2 of your SP-178278 radius end slipper springs. My trailer has 1/2inch bolts in the front. Can you supply a 1/2inch front bushing on these springs? | The nylon bushing is included with Slipper Spring # SP-178275. The bushing...
Recommended Slipper Spring for Custom Kayak Trailer
I have a custom kayak trailer and the leaf springs were removed by the previous owner. It tows pretty good without the leafs but can be bumpy at times. Id like to take some of the stress off the tires and axle. It uses a slipper axle set up.....
Replacement LM11949 Bearings and Leaf Springs For Older Boat Trailer
I have an old boat trailer that Id like to restore. Looking for hubs and leaf springs. Hubs are 5 on 4 1/2 pattern with a 3/4 inch axle. Outer Bearing reads LM11949. Leaf Springs are 3 leaf slipper spring and measure 24 1/4inch long and 1 3/4inch...
Replacement Leaf Springs for Dump Trailer with 3500-lb Axle
I got 10 foot dump trailer with 3500 axle I want go for 7000 can you tell me what kind spring | If your 10-foot dump trailer was made with a 3500-lb axle you cannot double its weight capacity just by swapping out the leaf springs to higher-rated...
Can 3700lb 4-Leaf Slipper Spring SP-040275 Be Used On Trailer W/ 3500lb Axle?
would the SP-040275 springs rated for a 3700 lb axle work on a 3500 lb axle? | Yes, the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long # SP-040275 would work on a 3500lb axle, they are just ever so slightly stiffer. Now...
Leaf Spring Recommendation for Trailer with Slippers Springs that are 24-7/8 inches
Im looking to purchase a set of new leaf springs for my boat trailer. Im not sure of the axle rating, it is 1 7/8inch square 4 lug. The boat is a 1648 aluminum flat boat with 25 hp go devil surface drive, if that helps. Attached photo shows...
Need a 3-Leaf Slipper Spring Kit for my Boat Trailer with 2 Inch Square Axles
Do you sell a complete kit for my springs on my boat trailer. I have a 2 in. Square axle. There are two leaf slipper springs. 1-3/4 wide. What I like to do is put 3 leaf springs in and do the two u bolts preside like your video. I currently...
How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
How far should should the flat end of a 30 1/4 spring extend beyond the ring with no load on it the frame is upside down now | The flat end of a slipper spring should stick far enough through a hanger to allow for the full travel of the suspension...
1000 lb Capacity Slipper Springs For 400 lb Sailboat Trailer To Ease Rigid Ride
Hi, I have a set of slipper leaf springs on my boat trailer that at 24 1/4 inch they are rated for 1500lb and they are beating up my little 400lb sailboat. I saw you have lighter weight slipper leafs rated for 1000lbs. They are 24 5/8inch would...
Are Trailer Spring Seats Needed for Square Axles with Leaf Springs?
Im replacing my square boat trailer axle.the one i have know has no spring seats it sits right on the leaf springs.i noticed most square axle fully assemble axles which i want has spring seats.this is a tandem axle trailer.im not replacing the...
Best Equalizer Suspension Upgrade For Tandem 3,500 lb Axles
Time to upgrade my travel trailers suspension. I have a Jayco 2010 Jayflight 24RKS with tandem Dexter 3500 axels. The trailer is about 5000 lbs. dry, with a GVWR of 7000 lbs. Ive been looking at new equalizers and new beefier leaf spring. The...
Replacement Leaf Springs for Calkins Boat Trailer with 3500-lbs Axles
I need to replace the leaf springs on my 1996 Calkins boat trailer. Could you advise me what size I should order and replace for it? Model # CW1820, GVWR 4372lb, Max load cap 3500lb. Kindly advise. Best regards, | I'm not seeing any matches...
Could Spring Eye-Bolt 166081 be Used with Leaf Spring SP-040275
Hello, Can I use Shackle Bolt with Locknut for Double-Eye Springs - 3 Long, Item 166081 instead of Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2 Long, Item 166079, which will be a bit too long to install 4-Leaf Slipper Spring w/...
Parts Needed To Build A 3,500LB Trailer Frame For a Homemade Tear Drop Trailer
Quick question ,Do you sell trailer frames with axle for the purpose of building a custom tear trailer or can you recommend a web site so I can buy a frame. I will be purchasing. Trailer rims from your web site soon . Thanks! | While we do...
Recommended Replacement 1-3/4 Inch Wide Leaf Springs for a Boat Trailer
Hi, I need to replace my leaf springs on my boat trailer. The information I have is: 1. Trailer age ~ 10 years 2. GAWR/PNBE all axles 1755 lbs. 3. Slipper spring - flat end 4. Leaf length - best I can tell its about 25 1/2 though Ive yet...
Are Trailer Leaf Springs Sold Individually or in Pairs
Are these leaf springs sold as a pair or individually? | The trailer suspension leaf springs that we carry, including # SP-178275 are sold individually. When replacing springs though you will always want to replace all of them at the same time....
Filter Your Search
Contact and Help