Bushings for Slipper Spring with 1/2-Inch Inner Diameter
Updated 04/16/2018 | Published 04/13/2018
Products Featured in This Question
Question:
I am interested in 2 of your SP-178278 radius end slipper springs. My trailer has 1/2inch bolts in the front. Can you supply a 1/2inch front bushing on these springs?
asked by: Del
Helpful Expert Reply:
The nylon bushing is included with Slipper Spring # SP-178275. The bushing has an inside diameter intended for a 9/16-inch bolt like # 166079. I linked a page showing all suspension bolts in this diameter.
For a bushing with a 1/2-inch inner diameter and the 11/16-inch outer diameter required for this spring you can use # TRBU11506.
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Standard Grade
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Square Trailer U-Bolt with 1-3/4
- Q&A: What Leaf Spring do I Need for My 2015 Karavan Double PWC Trailer Measuring 27"?
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Q&A: Do You Have a 2" Wide 4 Leaf Spring for a 2,990lbs Axle on My Trailerman Single Axle Trailer?
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Where to Install the Malone Storage Box on MicroSport Trailer
- Q&A: Replacement Slipper Leaf Spring for Triton PWC Trailer
- Article: Where to Position the Trailer Axle?
- Q&A: How To Properly Measure Slipper Springs For Your Trailer's Leaf Sping Suspension
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements