Mounting Hole Separation for Taylor Made Bimini Eye Straps
What’s the distance from mounting hole to hole in mm? Thank you! | The Taylor Made Eye Straps for Bimini Tops # 3691225 have a mounting hole center of 35mm or 1-3/8". |
Is the Taylor Made Sealing Foam Tape for Boats the Same as Taylor Made 41100049 Mounting Foam
Is your Taylor Made Sealing Foam tape for boats - 5 pieces, 7foot long, 3/4inch wide and 1/4inch thick the same as this Taylor Made part #41100049? | We do not carry the 41100049 from Taylor Made. From what I was able to locate on Taylor Made's...
Does the Gas Strut # 3691834-20 Come with the 10mm Socket Ball?
Im upgrading my boats rod lockers and need to purchase the Taylor Made Marine Gas Strut. Do those come with the 10mm ball or do I need to buy those separate? If so, do you carry them? | I confirmed with my contact at Taylor Made that the Taylor...
Recommended Gap Filler For A Vehicle Tail Light
i just had a new tail light installed but noticed that there is a very small gap between the car and tail light. what is the best item that i can seal the little gap with, but still be able to remove the tail light easy when needed a tail light...
Retracted Length of Taylor Made 15 Inch Long Gas Strut
Is this 9.5 inches closed? | The Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket - 90 lb Force - 15" Long - Steel # 3691876-90 is 9-3/4 inches compressed/retracted. It is 15 inches when extended. |
Recommended Gas Strut for my Husky In Bed Truck Tool Box
I am looking for replacement gas struts for a Husky Truck Tool Box, part is made by Contico #40211111. Extended length about 13 1/4 and compressed length is about 9 1/2. I dont know what the weight is. Any suggestions. | The Taylor Made Marine...
Does Lid From TorkLift PowerArmor Locking Battery Box Make Rattling Noise During Travel
I want to mount this inside a boat cabin. Is the lid going to make noise due to any vibration or is it a tight fit that wont allow it to rattle? | You might get some noise from the lid on the TorkLift PowerArmor Locking Battery Box # TLA7708R...
Are There Any Rubber Attachments For The Lippert Solid Step Fold Down Steps?
Foot Pad for Lippert SolidStep Manual Fold-Down Steps Is there a rubber attachments for the feet. | While Lippert does not manufacture rubber attachments for the Foot Pad # LC6451138, we do have the Bumpers # 3691167 you might consider. These...
What Size Chain Is Needed For 24" Taylor Made Sur-Moor Traditional Mooring Buoy 36922174?
What thickness of chain is recommended for this Taylor Made Traditional Mooring Buoy - 24D? And what length? I was going to guess 2 inches and 10 feet. Will you need ten feet for the top and ten feet for down at the concrete block? THanks!...
Does the Gas Strut Included the Mounting Brackets
does strut come with two ball bracket to fitss? sockets? Are they | The Taylor Made Marine Gas Strut for Boat Hatches part # 3691850 is for just the strut. We have several options for the 10 mm bases however to pick what works best for you...
What Size Rope Comes w/ the Taylor Made Double-Eye Boat Fenders?
Please tell me the size diameter of the rope that is included | The rope that comes with the Taylor Made Double-Eye Boat Fenders item # 36931016B2P is 3/8" in diameter. |
Can a Forester Class C 3011 Flat Tow 2014 Ford F-150
Will a Forester class c 3011 flat tow a 2014 f150? | If you're asking if your Forester Class C 3011 is capable of flat towing a vehicle the answer is more than likely yes. Without knowing the year it is difficult to find the towing capacity...
Does the Taylor Made Tuff End Round Boat Fender Ship Deflated & What is Needed to Inflate the Fender
Does this ship deflated and if so what is needed to inflate it? | Yes, the Taylor Made Tuff End Round Boat Fender for Commercial Boats # 36961152 ships deflated. To inflate the boat fender you will just need a hand compressor or hand pump. The...
Timken Bearings for Trailer with Inner Diameters 1.06 and 1.375 inch
I need a timken trailer bearing kit for 1.062inch and 1.375inch diameter axles. The axles step down in size. I need bearings for two axles and brakes and drums 10inch diameter drum for one axle. Cant find quality parts and I dont know part numbers....
Mounting Hole Size Needed for Taylor Made Adjustable Handles for Boat Side Windows
my boat is a 1986 Starfire 225 SantaCruz. This is just like the one on my Boat but your adjustable handle said it needs a hole in the glass at 3/8 mine is smaller about 5/16 or 19/64 is there another size that is smaller for the window hole...
Do the Taylor Made Sur-Mark Buoy Labels Come with Reflective Tape
Can you tell me if your product Taylor Made Sur-Mark Buoy Labels - Slow No Wake - 24 Long x 13 Wide - Qty 2 Item # 36946181 comes with the 2 orange stripes one above and one below the lettering. I see customer images with the stripes but your...
Recommended Water Heater Replacement For A 2012 Keystone Montana Big Sky 5th Wheel
I have a 2012 Keystone Montana and want to replace water heater with atankless one. Can you recomend one that will fit my camper? | If you still have the original water heater in your 2012 Keystone Montana then the options currently available...
Recommended 23" Long Gas Strut fo a Camper Door
I am looking for a 23inch gas strut but I only need 10 lb of force. All it does is hold my camper door open as needed, and keep it from striking the arm of my awning. So there is no weight bearing involved. I could possibly use a 22 or 24 inch...
Will the Taylor Made Jet Ski Fender Fit Any Jet Ski
Does this fit a Yamaha Jet Ski VX Limited 2021? | The Taylor Made Jet Ski Fender part # 3691069 is universal in fit. It is designed to be attached to the bond flange. It is flexible so it can conform to different style jet skis. That said, I...
Dimensions of 23 40 Lb Taylor Made Marine Gas Strut for Boat Hatches
On the one I am replacing, the shiny rod is 10inch long. Is this one about the same or whatever it is, will it work for my motorhome entry door? | The Taylor Made Marine Gas Strut for Boat Hatches part # 3691879-40 measures 23" long extended...
What's The Difference Between The Taylor Made Big B, Storm Gard, And Super Gard Boat Fenders
What is the difference between the Big B, Super Gard and Storm Gard fenders? | Hey Greg, Starting with the Big B # 36971026, this model boat fender doesn't come with eyelets and requires you to run the rope through the fender. Next up is the...
Replacement Valve Kit For Taylor Made Tuff End Fenders
This says the valve fits Taylor Made Tuff End Buoys, which are round. I need a try-valve for Tuff End Fenders, which are cylindrical. Is it the same valve? | Hi Jay, For the Taylor Made Tuff End fenders you'll need the Replacement Black Valve...
What Is Needed To Install the Taylor Made ClearVue Keel Protector
What’s needed for installation | In order to install the Taylor Made ClearVue Keel Protector part # 36945950 you aren't required to have any additional tools but I have attached some below that will make things easier for you. - Blow Dryer...
Will the Taylor Made Dual Boat Fender Rack Fit 12" Diameter Fenders
my fenders measured 12inches im looking at the taylor 3692011 it says its up to 11 inches. will mine fit? | The Taylor Made Dual Boat Fender Rack part # 3692011 is designed for 9"-11" diameter boat fenders such as the Taylor Made Super Gard...
Filter Your Search
Contact and Help