Determining Correct Replacement Leaf Spring For Trailer W/ 3000lb Axles and 27" Long Springs
I have a 1975 king horse trailer manufactured by Cimarron. Looking to replace all for springs and hardware. The spring on it measures around 27” from center of eye to center of the other eye but the springs on it are probably worn and stretched....
Leaf Spring Recommendation for Trailer with 5,200 lb Axles
My trailer has 5200 lb axles. Should I go with the 4-leaf, 5000 lb springs or the 6-leaf, 5300 lb springs? | Your best option would be to go with the 5,300 lb leaf springs as ideally you match the capacity exactly but if you can't then you'd...
Recommended Leaf Spring To Replace Broke Spring On Tandem Axle Trailer W/ 5000lb Axles
I have a 5000lb tandem axel trailer and broke a leaf spring what pound would each leaf spring be ? | More than likely your trailer would use a 5300lb leaf spring like the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long #...
Availability Of 1000lb Slipper Spring For A 1000lb Motorcycle Trailer
Do you have any 23 light duty trailer springs. I need a pair for a single motorcycle trailer with a 1,000 lb rating. Thanks. | The shortest 1000lb rated spring we offer is the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles -...
Hanger Kit to Install Leaf Spring on Trailer that Has Slipper Springs
The hangers on my trailer are welded to the frame so I can't change them. Do you recommend using slipper springs, instead of the double eye springs that I purchased? | You could pretty easily install the springs you have but you will need to...
Replacement Slipper Springs for 1985 Harding Boat Trailer
Hi. I saw an inquiry similar to this so Im guessing you can figure out the right solution. I have a 1985 Harding boat trailer with 1.75 x 28 4-leaf hook-down open-end slipper suspension leaf springs. Measured center of bolt to end of hook. There...
Replacement Leaf Springs and U-Bolts for a 1987 Shore Line Boat Trailer
I need help making sure I choice the correct springs. I have a 1987 shoreline T20-23G single axle boat tilt trailer. It currently has a 2x3inch straight axle with the 3inch acting as the height. The lug pattern is a 5 bolt with 4inch CL...
Can You Remove a Leaf On the 2-Leaf 1K Slipper Spring with Radius End
Can I remove the second leaf? What is the weight capacity if I do? My trailer will be around 400 lbs. all up, I think the 1000 lb spring will be too much for it. | The 2-Leaf Slipper Spring w/ Radius End part # SP-177275 cannot be disassembled....
Recommended Slipper Spring for Custom Kayak Trailer
I have a custom kayak trailer and the leaf springs were removed by the previous owner. It tows pretty good without the leafs but can be bumpy at times. Id like to take some of the stress off the tires and axle. It uses a slipper axle set up.....
Can I Remove a Leaf From the Bottom of a 4-Leaf Slipper Spring
should be able to remove the bottom leaf from the 4 to make it a 3 leaf slipper no probs?? | Eh, yeah, don't do that. The weight capacity of the leaf spring will definitely be affected but it will be reduced to an unknown capacity so if you...
How To Choose Correct Replacement Leaf Springs for a 1959 Shasta Deluxe Trailer
He i can you help I have 1959 Shasta Deluxe wanting to replace my leaf springs which consist of 9 leaves and 32 1/2 eye to eye 17 1/2 on center axle the axle is 2inch square what is my best option | In order to find the correct replacement...
Replacement Leaf Spring for 7k Axle that is 26-3/4 inches Long
Good afternoon, I have some leaf springs from my trailer and Im trying to figure out which leafs I can use to replace them. The trailer is a 1986 so there isnt much info left on it anywhere. The MAX CAP for the axles is 12,000lbs, they are...
Hanger Spacing Dimensions for Installing Slipper Springs on a Boat Trailer
I am converting my single axle boat trailer from double eye springs to slipper springs. I have removed the old hangers and am going to weld on new ones for the slipper springs. My question is, where should the rear slipper spring hanger be on...
Replacing Suspension Components on Old Motorcycle Trailer
have an old motorcycle trailer want to put on new springs 2 in wide by 34 in eye to eye do not seem to find anywhere | It will be time to update your suspension on you motorcycle trailer. Current leaf springs for trailers are all 1-3/4" wide....
2016 Coachmen Clipper BH17 Replacement Leaf Spring Suspension Enhancement
Hi - not sure if this is the right place to ask this question... if not, can you please redirect me to the appropriate place. I tried calling etrailer.com but gave up after firstly not finding an option for technical questions and then being...
Slipper Spring for 5,000 lb Trailer Axle
Im looking at new slipper leaf springs for my trailer the originals are five leaf and the ones you all Sell are four leaf. My trailer has 5k lb axles. I will be replacing all at once but should I be concerned at all about the different leaf...
Recommended Replacement Axle for Tandem Axle Trailer with 78 Hub Face to Hub Face Measurement
looking for 2- 2000 to 2500 lb tandem sprung axle assemblies with electric brakes for a Remeq deck over covered trailer. face to face =78. centerline of springs =61 3/4. double eye to eye spring=24 1/2.the springs are in bad condition so this...
Can the 2 Leaf Spring on my 1977 Boat Trailer be Replaced with the 3 Leaf Spring # WIF3
I have a broken 2 leaf spring on a 77 boat trailer would like to put on the 3 leaf spring WIF3 for 3000 lb axle rather than the SP-038275 for 2000 lb axle. Would that be wise? measurement for the broken spring are 31 and a half so thats the...
How Far Apart From Each Other Should Hangers be Welded for Leaf Springs on Trailer
when welding spring hangers on a trailer , how far apart do you put them. | As a general rule, you will want the distance between the hangers on a leaf spring suspension system to be around a 1/2 inch shorter than the length of your leaf springs....
Replacement Leaf Springs and Suspension Parts for 1962 Forester Camper Trailer
i am looking for leaf springs and shackles for a 1962 forester camper | Trailer makers do not maintain specs on items like suspension components but it is not difficult to identify correct replacement suspension parts like leaf springs and shackle...
Picking Between 27 inch and 25-1/8 inch Long Leaf Spring for Trailer
Looking to purchase leaf springs for a diy utility trailer with 3500# axle. Is there any reason not to go with the longer 27” leaf springs compared to the 25.125”. Purchasing new hang kit as well, suggestions? | There wouldn't be a noticeable...
Thickness of the 4-Leaf Slipper Spring SP-040275
Can you tell me how thick the spring pack is at the axle mounting point. | I went and grabbed a 4-Leaf Slipper Spring # SP-040275 from our warehouse to measure it and found that it is 1-7/8 inches thick if you only look at the leafs. If you...
Replacement Slipper Springs for a 2,100 lb Trailer
My boat trailer currently has 2inch axle with a 4 leaf slipper spring 1 3/4inch wide that needs replaced. This is my first time replacing them so I want to make sure I get all the right parts. After measuring, the SP-040275 looks like it is...
Determine Axle Rating by Measuring to Get Correct 2 Inch Wide Leaf Slipper Springs
My axle measures 2 inch x 2 inch box section. Is that a 2000 lbs axle? What spring rating do I need? I could find no markings on the axle. | In general, you can measure the diameter of an axle tube to get the rating, though it is more of a...
Filter Your Search
Contact and Help