Does The Weld-On Hinge MA66ZR Have A Weight Rating?
how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...
Will the Marlboro Butt Hinge Work With a B Fold Utility Ramp Gate
part number MA37ZR, will these hinges support a b-fold utility trailer ramp gate? I want to use them for the folding part of the ramp, I would use three of them | Yes, the Butt Hinge w/ Non-Removable Pin # MA37ZR will hold your ramp just fine....
Can The Marlboro Continuous Hinge Be Cut Down To Fit A Palomino Pop-Up Truck Bed Camper Door
I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...
Do Marlboro Piano Hinges Have Weight Capacity
I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
Does The Marlboro Continuous Hinge Come With Pre-Drilled Mounting Holes
The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
How is Pin of Trailer Barrel Hinge Secured
How is the pin retained? | Barrel hinges like the Weld-On Barrel Hinge with Grease Zerk # MA29ZR can be installed in two ways. One where the hinges face the same direction which allows the door to be lifted off the hinges if ever needed and...
Can The Stainless Steel Piano Hinge # MA34ZR Be Cut To Fit?
Can this hinge be cut down? | Yes, the Stainless Steel Piano Hinge # MA34ZR can be trimmed down. You will be able to weld it or drill holes to mount the hinge for your application. |
Can the 4" Wide Continuous Hinge MA85VR Be Cut To a Different Length?
Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...
How To Pick Out the Correct Replacement Piano Hinge for a Cargo Ramp Door
Looking for a heavy-duty piano hinge for a cargo trailer door ramp. 58-60 in length. Thank you | The main factor in choosing the correct replacement piano hinge is pin diameter which then in turn, denotes capacity. The hinge width and material...
What Size Grease Fitting Fits an RP94720 Reese 20K Goose Box
Need to replace the grease fitting on my Reese 20K Goose Box #94720. I tried a standard 1/4 x 28 grease fitting with no luck and can not find the correct size or pitch on the Reese or any other website. Any assistance would be greatly appreciated....
Recommendation For Removing Surface Rust on Steel Trailer Door Hinge And Preventing Returning Rust
we have an old Logan horse trailer with piano hinges that have rust bleed. We want to clean and repaint entire trailer. What is best way to remove rust from the hinges and protect them from rusting again? | On a Steel Hinge # MA52VR you will...
What Size Zerk Fitting Will Replace A Damaged Lock N Roll Coupler
What size is the low profile zerk grease fitting? When the trailer hitch side was welded, the fitting was ruined. Too much heat froze the ball bearing and one cannot grease. | I spoke to Lock N Roll and they use 6mm x 1 low profile zerk...
Weight Capacity of Weld-On Hinge w/ Brass Bushing and Grease Zerk
can you tell me what weight these hinges are rated for? Weld-On Hinge w/ Brass Bushing and Grease Zerk - Steel - 3-3/16inch Long - 5/16inch Pin Diameter Item # MA39ZR | The weight capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk...
Solution for Needing Replacement RV Cargo Door Hinge
Looking for cargo door hinges, for Coachman Chaparral 2017 model M-381 RD , thank you! | Usually RV cargo door hinges are piano style hinges that are between 3 and 4 feet like the part # MA85VR which is 4 foot long. This could also be trimmed...
Can 6" Wide Continuous Hinge - 8' Long be Cut Down to 7 Foot
Can I cut it down to 7’ and not rune it? | Yes, you can cut the 8 foot long hinge kit part # MA32VR down to 7 feet in length and it would work great. |
Can The Marlboro Continuous Hinge # MA74ZR Be Cut Down To Size
I need 19 hinges 36” long. Can these hinges be cut in half to make two hinges? | Yes, the 3" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter - Aluminum # MA74ZR can be cut down to fit your needs. I just recommend first removing the pin and...
Weight Rating of Butt Hinge w/ Non-Removable Pin MA87ZR
What is the suggested weight limit that this product can handle? | The Butt Hinge w/ Non-Removable Pin, # MA87ZR does not have a weight rating. |
How Thick is the Metal Used For the Butt Hinge w/ Non-Removable Pin # MA37ZR
Ma37zr hinge Need to know thickness of metal | The Butt Hinge w/ Non-Removable Pin # MA37ZR is 0.180" thick or approximately 3/16". It works great for heavy-duty trailer doors or ramp doors that typically require multiple hinges. |
Load Rating of Marlboro Continuous Piano Hinge
Item # MA52VR 6inch Wide Continuous Hinge - 6foot Long - 1/2inch Pin Diameter - Steel Im not seeing any information on loading capabilities. Do you have any information or should I just work with my basic knowledge of steel? | The 6" Wide...
Can The Marlboro Continuous Hinge # MA64ZR Be Cut Down
Can this be cut down? My door is 5.5’ tall and has a 45 degree cut on the end to match the top part of frame | If you wanted to cut down the 2" Wide Continuous Hinge # MA64ZR you would want to first remove the pin and separate each part and...
Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
I need a replacement Zerk fitting for a skid wheel. What size do I need for the following model? and do you carry? 48-979023 UltraFab Weld-On Jumbo Steel Roller Weld On - 2-1/2inch Wide x 3inch Tall Item UF48-979023 | Hello Gaby. I reached...
Filter Your Search
Contact and Help