!Liberty Travel Trailer  x   >   !CR-V  x   >   !Raptor TT Toy Hauler  x   >   Dutton-Lainson  x   >  

Hi, can you tell me how far out from the frame this holds the spare? Im going to use it with 20.5 x 8 x 10 tire/wheel fairly deep wheel on a snowmobile trailer tongue. | I spoke with my contact at Dutton-Lainson, and he told me that from the...

Hi, Looking for this part with a bolt on bracket. The pivoting flat foot adjustable jack for back end of trailer. Thanks | The closest option we have is the Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On -...

My winch to raise the roof of my pup broke this weekend. The gears broke. Cables and springs seem to be fine. This model has the winch underneath the trailer beside the door. I cant find any info on it and would like to order a new winch. I...

Does this trailer jack include the part that screws onto the trailer, with 4 bolts.. and then the jack is pinned in to it... I do not see this part in the picture or descrption?? | The Swivel Marine Trailer Jack with Caster Wheel - Bolt On...

The only information I can find says T1801 and when I measured it from center of handle to center of hole it is 8 inches. There is also an 8 stamped on the handle. The winch is on a 2007 Lund trailer. | There are a couple of handles that you...

Could you tell me if I order AF304422, the item DL5703160 will be include ? | The Replacement Brake Disc Assembly part # DL304422 is not included with the Replacement Brake Spring Kit part # DL5703160. These are separate parts for the Dutton-Lainson...

Hello, I have 2019 Tracker Pro Guide V16 sc boat with 9.9 Mercury Pro Kicker. What jack would you recommend for my boat. I need to move the trailer around to store it. This is on concrete driveway and garage. Thanks for your help. | Since you'll...

could you please tell me is there a spring on the ratchet available for a Dutton Lainson DL2000A? if so how much does it cost? Thanks. | I have just what you need, the Winch Ratchet Repair Kit by Dutton-Lainson part # DL70475 which is a fit...

I have a 12foot Klamath Aluminum V boat with a tilt trailer. What size bunks would you reccomend? | An aluminum boat is not going to weigh as much as some other forms of construction so the 2,500 pound capacity of roller bunks # DL21740 is probably...

Hello, Do you have any information on how to set-up / adjust the bunk-rollers on a boat trailer so the boat will center when loaded and also best be supported? Thanks and I have been very pleased with your products to date. | Boat Trailer Roller...

I want to set up a winch to rotate a swing boat lift 180 degrees in a marine environment. Is this winch compatible with marine salt water environment? Thanks | The Dutton-Lainson Worm Gear Hand Winch, # DL10970, is made of laminated steel gears...

Heavy Duty Winch Strap, 15foot x 2 Item # DL24237 I am looking for a strap similar to the one listed above but with a Stainless Steel shackle. Do you have any straps with a Stainless Steel shackle. | I may have a good option for you, but...

My boat winch is a Shelby 5407B 1700 lbs. What will replace this? Thanks | To replace your 1,700 lb Shelby 5407B winch I recommend the Dutton-Lainson Single Speed Winch # DL14627 which is rated for 1,800 lbs. This winch features permanently...

Hello, I have a problem when pulling my PWC from my local boat ramp during low tide. I cannot float the PWC onto the bunks. I have to pull the PWC up onto the bunks, and then have to winch it up. It is difficult to winch it up because of...

I have a 2014 Tahoe: dry weight 3031 lbs, outer wood bunks 10, inner wood bunks 8. I would like to know if you have roller bunks that would fit this application? I would need both sets. | We do have roller bunks that you can utilize on your...

Does the crank handle disconnect? | The Fulton High-Performance 2-Speed Trailer Winch - Rope or Strap - 2,600 lbs # F142412 does not have the quick disconnect feature. You would need to remove the handle using a wrench or socket. The 2 speeds...

part # DL22507 Hello, I am wondering if the wheel swivels on this jack? | It does! The jack itself won't swivel up so its parallel to the trailer frame but the caster wheel does swivel for easy maneuverability. You can see the caster wheel...

Do you have anything that fits a taller I beamed trailer that doesn’t require drilling? Looking for a spare tire mount. | We offer some clamp-on options, like the Offset Trailer Spare Tire Carrier # DL22120 you were looking at, but they all...

I am looking to replace the bunkers on my boat trailer. My boat weight is 3,200 lbs. what set if rollers would you recommend. I have a 2001 21. Ft Rinker Captiva. Thank you. | Each pair of Boat Trailer Deluxe Roller Bunks # DL21740 have...

Hello - I have a trailer with a tongue that is 3 inches wide and 2 inches vertical. I am looking for a tongue jack with a wheel that will bolt on to this tongue. I wanted to ask if you could recommend a product. Thank you. | We've got a couple...

I need a winch with about 50foot long cable. If that is hard or real expensive to come by, I suppose I can have a separate cable that attaches to the winchs cable. Let me know what you recommend/think. | For an affordable winch with a 50'...

What is length of the cable? | The cable on the Dutton-Lainson StrongArm Electric Winch item # DL25505 is 20' long and 3/16" in diameter. |

What is the height of this coupler? | I went out to the warehouse to measure Dutton-Lainson trailer coupler # DL13897 for you. The base where the mounting holes are is 2-1/4 inches. From the bottom to the top of the closed latch is 4-1/8 inches....

My trailer jack has broken and I would to replace it. The trailer beam Ram Lin boat trailer for mounting is 4inch top to bottom and 3inch deep. I would like a high quality jack. Do you have any suggestions? | The Dutton-Lainson Trailer Jack...