Mounting Plate Dimensions And Bolt Hole Spacing On The Ultimate Trailer Jack 322-RDJ-2K
I have a RAM jack 3000lb support/2000lb jacking my Homesteader trailer. Will this jack replace it as far as the mounting hole placement or, if available, is there a template of the jack mounting hole pattern that you can send me. | Yes you can...
A-Frame Trailer Jack For Older Military Trailer
hi. do you know of any companies that make a 24 vdc trailer tongue jack? I have an old military truck n trailer Id like to set up with one. thanks | There are no 24 volt A-frame trailer jacks, they do require a 12-volt power source. So what...
Sidewind A-Frame Trailer Jack for 10,000 lb Trailer
I need a jack with less then 8” of clearance from A-frame flange to top of jack that can handle a 10,000 gvwr on trailer for tailgate clearance was looking at the ultimate trailer jack, that meets my clearance issues but I only have 2.5” of...
How Far Out Does the Pin on the Ultimate Trailer Jack # 322-RDJ-2K Stick Out
how far does the pin stick out from the jack. I have a winch that is close but not up against the jack and need to know how much clearance I need directly behind the jack post for the pin to operate. | I went out to the warehouse and found that...
Determining Height of Pro Series A-Frame Jack # PSEA20000103 for Tailgate Clearance
You have stated that the height of the PSEA20000103 from where it bolts to A-frame to top of jack is 11. Does this include the handle, which is generally about an added 2? I have a 2008 Toyota Tundra and the tailgate hits the top of my existing...
Wheel Caster to be Used with Ultimate Trailer Jack
What wheel do you recommend for the ultimate trailer jack? Thanks | The wheel caster you need is the part # JC-102 to be used with the Ultimate Trailer Jack # 322-RDJ-2K. |
Trailer A-Frame Jack with Maximum Lift Height
Hello, I have a travel trailer with a lift kit, and Im finding I need to add many blocks under my current jack to level the trailer. Currently on my driveway the distance between the ground and the top of the A frame is 32. Does any jack provide...
Recommended A-Frame Trailer Tongue Jack for Off-Road Trailer
Im converting my cargo trailer to a camper/mobile ham radio station. I want to go off-road with it and have some concerns about the jack as well as tire pressure. My jack is the A-frame style and projects down. I worry about catching it on...
Is There an Electric Jack With Less Than 9" Below the Mounting Flange
I am looking for an electric tongue jack for a Casita 17foot trailer. It has to have a triangle bolting plate with ~ 3 to 3 !/4inch bolting pattern. I would like it to have the 7 pin connection plug. I was looking at the - Black - EJ-3527-BBX...
Recommended A-Frame Trailer Jack for Applications with Limited Ground Clearance
What is the shortest bolt-on a-frame jack you have from the bottom of the mounting plate to the bottom of the extendable leg when retracted? My current jack is too long and often hits the ground when towing. Can be light duty, 2000lbs or less....
Length of Jack Handle On Ultimate Trailer Jack # 322-RDJ-2K
Hi, just looking to find the center of jack to end of handle length. Have a side wind on my trailer now but only have to so much clearance to the front of the trailer body. | The Ultimate Trailer Jack # 322-RDJ-2K is 6-3/4" from the center...
Recommendation of A-Frame Trailer Coupler for use with TJDA-5000S
I would like to buy an A frame jack and coupler together. Will TJDA-5000S leg jack fit Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-52? | I do have a couple solutions for you but the Square A-Frame Jack # TJDA-5000S is not compatible...
Will the Ultimate Trailer Jack Work With the Low Profile Replacement Footplate for RAM Jacks
Is the jack foot plate Item # JF-100-ZBK compatible with this jack? Looking for a low profile foot plate. | The Ultimate Trailer Jack part # 322-RDJ-2K should be compatible with the Replacement Footplate part # JF-100-ZBK. This is not something...
Do All A-Frame Trailer Jacks Use the Same Mounting Pattern and Center Hole
I have a 10ft trailer that needs a new jack. The top hole is 2 1/4 and the bottom whole is 1 7/8 inch Diameter. It is 3 1/2 inch deep from one whole to the next. Can you give me a product number. | The a-frame trailer jacks all use a standard...
Can an A-Frame Trailer Jack Be Rotated for Clearance
Can the release pin on the collar be mounted to the side instead of to the rear.? I have a winch for my pop up directly behind he jack. | Yes, you can mount the Ultimate Trailer Jack part # 322-RDJ-2K so that the release pin faces outward instead...
Trailer Jack Recommendation with Best Under Trailer Ground Clearance
Looking for a replacement trailer jack with footplate for a vintage Shasta Compact camper. Goal is to have as little exposed when retracted as possible. Any recommendations?? Thanks! | I have a great solution for you. The Ultimate Trailer...
Needing High Ground Clearance 2000 lb Trailer Jack
I have a subaru which I use to tow a small fiberglass trailer 13’. The ground clearance when going over some dips and humps sometimes scrapes the jack post. Is there a jack with a lower portion, say maybe 6”. I see this one is 9”. On my...
How to Add Clearance so Truck Tailgate Does Not Contact Jack
Cut the rack tube. My issue is I need a short top side of the jack to insure my truck tailgate will open while hitched to my A-liner trailer and not contact the jack.This jack seems to be a perfect jack to customize the jack height while having...
Height Adjustable Side Mount Bolt On Trailer Jack
RDJ-2K The Ultimate Trailer Jack - A-Frame - Weld On or Bolt On - Topwind - 27-1/2 Travel - 2,000 lbs Do you have one of these that is a side bolt on, kind of like a swivel type but not a swivel type. Thanks | The side mount bolt on ARK Xtreme...
Best A-Frame Trailer Jack Recommendation for Folded Down Tailgate Clearance with Truck
im looking for an A frame trailer jack so I can open my tailgate on my Ford F-150 with the trailer hooked on. So sort of low profile or fold down unit. Thanks | The best trailer jack for tailgate clearance like you are wanting is the Ultimate...
A-Frame Trailer Jack that Has Lowest Height to Fit Under Tailgate
I’m interested in an A frame jack My current jack hits just barely my truck tailgate My current jack measurement from mounting bracket to top of handle is 13” Do you have any jacks that are approximately 11 1/2 “ from mount bracket to top...
Can Timbren Axle-Less Suspension System Work With Off-Road Tires?
Im building a tear trailer. The frame is based on a 5x 10 foot floor. I would like to know if the 1200# Timbren Axle-less axle w/ 4 inch drop will be strong enough I also want to put OFF Road wheels and tires on the tear. Thanks | There is...
How Short Can the Drop Leg on the Ultimate Trailer Jack Be Made
How low can I the tongue on my trailer with the Ultimate Trailer Jack - A-Frame Item # 322-RDJ-2K With the caster installed - My current one does not get low enough to get my Chalet A frame in the garage without removing the castor and using...
Side Wind Bolt-On Trailer Jack for Trailer with Limited Ground Clearance
Do you have jack with the same functionality, but as a sidewinder? | I do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket...
Filter Your Search
Contact and Help