Trailer Hitch that Fits 2015 Dodge Challenger Hellcat
2015 challanger hellcat. fitment? | We do have a hitch that fits your 2015 Dodge Challenger Hellcat like with the Curt part # C12064 which we have had customers come back and tell us it fit their Hellcat well. |
How Much Clearance From Hitch Pin Hole on Patriot Hitches Adjustable Drop Hitch Receiver.
Hi, I have a 2018 dodge challenger I already installed a hitch but now I need a riser of at least 10. I am looking at this one item # ph67sr. My only concern is if it will clear past the bumper on my car. | You will want to measure the distance...
Recommended Trailer Hitch For 2019 Dodge Challenger Towing Light Trailer
Hello, I am going to be in drag week 2020. With drag racing weight and time is an issue so I wont be able to take the hitch on and off. What are the dry weights of the curt c13236 and c12064? I am pulling a trailer less than 1800# so the pull...
Can Rear Diffusers be Kept When Installing Trailer Hitch on 2020 Dodge Challenger
I have rear diffusers mounted is it possible to keep this with this hitch ? There are 5 I would give up the middle one thanks | Thanks for the photo, and the rear diffusers on your 2020 Dodge Challenger would have to be removed in order to install...
Troubleshooting Amazon Trailer Leaf Springs Failing Within 100 Miles Of Use
Hello, I recently had one of my leaf springs break on my 35ft tandem axle fifth wheel. I replaced all 4 them the other day with a set I got on Amazon, they matched specs with exception of being 5 leafs vs the original 4 leafs. They are both...
What is the Difference Between Curt Hitches # 13093 and # 13465
#13093 and #13465 Its for a 2010 dodge challenger | Only the Curt Hitch # 13465 that you referenced would work for your 2010 Dodge Challenger. The other Curt Hitch, part # C13093 that you referenced is designed for 2011 and up Challengers. That...
Is It Normal for Brake Lights Instead of Turn Signals to Flash When Using Hazards With Converter
Hi. I buy the Curt 2 to 3 wires converter to separate turn and brake lights on a Dodge Challenger 2017 and it works good. But when i turn on the warning signals, it blinks the brake lights instead the turn lights. There is a way to solve this...
Locating Replacement Hardware For Trailer Hitch Receiver For a 2012 Dodge Challenger
Looking for the trailer hitch mounting hardware kit ,for a 2012 Dodge Challenger. Ty | First you will need to verify the exact receiver you have for your 2012 Dodge Challenger. I have listed the different receivers we carry below. Once you have...
Recommended Cable Lock For MaxxHaul Platform-Style 2 Bike Carrier
Hello, I would like to purchase the MaxxHaul Platform-Style 2 Bike Carrier for 1-1/4inch and 2inch Hitches. Could you please provide an appropriate Hitch lock I would be able to use? Also any locks to secure bikes to the platform bike carrier...
Parts Needed to Flat Tow a 2014 Dodge Challenger
do you have a tow bar that would fit a 20014 Dodge Challenger and wouldnt have to cut holes in front bumper cover thanks | We do have a base plate kit confirmed to fit your 2014 Dodge Challenger that won't require cutting holes in the front...
Will the Magnaflow Cat-Back part # MF15123 Cause Issues with the MDS Of a 2013 Dodge Challenger
2013 dodge challenger rt. with automatic transmission. Fuel saver kicks in and out at speeds under 40mph . Dealer states exhaust system is the problem and suggest removing it! They further states tht without back pressure the EGR valve is...
Parts Needed to Add Electric Drum Brakes to Rear Axle of Tandem Axle Travel Trailer
Hello, I am looking to replace my current electric brake assembly with AKEBRK-35-SA on my tandem axle travel trailer. My front axle has brakes that are worn, however the rear axle does not have any brakes. Apart from wiring, what all do I need...
Steering Stabilizer for 2017 Thor Challenger Built on Ford F-53 V10 Chassis
Steering stablizer for my 2017 Thor challenger class A motorhome. F53 v10 GVWR 24K | For your F-53-based 2017 Thor Challenger V10 with GVWR of 24K we offer front and rear sway bars, shown on the linked page, as well as Roadmaster steering stabilizer...
Recommended 2" Trailer Hitch Receiver For 2018 Dodge Challenger Scat Pack
I have a 2018 Dodge Challenger scat pack need to no which hitch I need saw your video then where in Myrtle beach or so can I get it installed I need a 2”x2” | For your 2018 Dodge Challenger Scat Pack Edition I recommend the Curt Trailer Hitch...
Will Adding Shorty Headers and Exhaust w/o Catalytic Converters Increase Power of 2013 Challenger
im putting shorty headers and cat back system on my 2013 challenger with 5.7 my question is should i leave stock converter on and my cat back comes with resonators. how much extra hp and torque could i get out of doing away with stock converter?...
Recommended Trailer Hitch for an RV Towing a Motorcycle Trailer
I have a ram 1500 ecodiesel and tow a 30 ft trailer about 6k lbs. I would like to either find away to put my harley in the back of 6.5 bed or attach a small mc trailer to travel trailer | The Curt Adjustable Width Trailer Hitch Receiver for...
How To Mount the Trailer Connector Outside the Vehicle on a 2019 Dodge Challenger
how do you get the 4 prong plug out of the trunk ? | It sounds like you are using a wiring harness that ties in behind the tail lights, the Curt T-Connector Vehicle Wiring Harness part # C56230. If that is the case and you are wanting to know...
Difference Between Tekonsha T-One and Curt T-Connector Wiring Harness for 2019 Dodge Challenger
2019 Dodge Challenger. What is the difference between, or which one do I need between the T-One Harness and the Curt T- Connector ? | Both the Tekonsha T-One # 118656 and the Curt T-Connector # C56230 are custom 4-Way trailer wiring harnesses...
Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
Is Trimming or Cutting Required to Install Draw-Tite Trailer Hitch 36548 on a 2012 Dodge Challenger
is there any cutting needed on the bumper or under the car, to instll this? | I have included a link to the installation instructions for the Draw-Tite trailer hitch # 36548. There is no mention of having to cut, trim, or drill anything for...
What Size Hitches Are Available for 2016 Dodge Challenger with Quad Tip Exhaust
I wish to find a tow hitch 1inch for a 2016 Dodge Challenger. I found the 2inch version but I do not need nor want that large of a receiver. Do you have such hitch? | Since your 2016 Dodge Challenger has the Quad Tip exhaust the only trailer...
Class III Trailer Hitch with Best Ground Clearance for a 2016 Dodge Challenger
Im looking to purchase a hitch for my challenger, but i would like to know which one is most off the ground I have ordered a Curt hitch before and the 2 inch opening for the ball mount was welded under the actual hitch bar that attached to the...
What Does Curt Trailer Hitch C13236 Look Like Installed on a 2017 Dodge Challenger
Id like to see some video or at least stills of how the CURT hitch looks on the current Dodge Challenger. Thank you. | I have included a picture showing what Curt trailer hitch # C13236 looks like installed on a 2017 Dodge Charger. I think that...
Draw-Tite Class III Max Frame Receiver Hitch & 2018 Dodge Challenger
I have a 2018 challenger 392. I was looking to get the Draw-tote trailer hitch but I would like to know what else I may need to be fully ready to tow a trailer. This is a side note but I’m looking to get a bushwhacker plus 15fk. Dry: 1900 lbs...
Filter Your Search
Contact and Help