Will a Swagman XC 2-Bike Rack Platform Style hold a 650bx3 or 27.5x3 wheel size bike?
Hi. I have a 6fattie bike, wheel size 650bx3 or 27.5x3. Will a Swagman XC 2-Bike Rack Platform Style hold that size? Thank you. | If your tires measure 3-1/2 inches wide or less, then the Swageman XC 2-Bike Platform Bike Rack, # S64650, will...
Recommended Wiring Harness for 2013 Infiniti FX35
2013 Infiniti fx35 Installing Curt 56281 trailer light connector. Kit has 2 extra relays the instructions state connect under front hood behind front headlights. I’ve looked in all fuse/relay boxes. Can’t find location for them. Please advise...
Does the Rear Fascia of a 2013 Infiniti JX35 Need to be Trimmed to Install a Curt Hitch # C13126
does your infiniti jx35 hitch require the bumper to be cut/modified? all the photos show the pathfinder and not the infiniti. i do know the stock infiniti hitch requires bumper modification, does your hitch sit below the bumper? thanks...
Will the Thule Force XT or Pulse Fit without Hatch Interference on a 2013 Infiniti JX35
Will this fit JX 35 with the hatch open? which one is better for my vehicle, Pulse L or Force XT? | I spoke with my contact at Thule who told me that any of the Thule cargo boxes including the Force XT and Pulse series of boxes should fit your...
Redline Hangers for Raising the Height of 5th Wheel Camper
I have a 2007 Forest River Cherokee lite 5th wheel camper, and I need to raise it about 4 inches to get it level when hooked to my pickup. I currently have 2 inch hangers on the unit, and the springs are on top of the axels. I see you have...
Trunk Mounted Bike Rack Recommendation for a 2013 Infiniti JX35
Will this work on an Infinity JX35 2013 ? | Yes, Thule has confirmed the Passage 3 Bike Rack part # TH911XT as a fit for your 2013 Infiniti JX35 so it would work well for you. I attached a review video for this rack for you to check out as...
Trailer Hitch that Could Possibly Fit 2011 Forest River Cherokee 235B Plus 4-Way Connector
i have a 2011 forest river cherokee 235b, i would like to find a hitch that is rated at the 500/5000gtw and possibly a nice harness to wire up a 4 flat trailer behind the 5thwheel can you help? | As long as the width of the frame on your 2011...
Best Trunk Bike Rack Recommendation for a 2013 Infiniti JX35
Whats the best rear bike rack mount for a 2013 Infiniti JX35? | The best trunk rack we offer for your 2013 Infiniti JX35 is the ThuleOutWay part # TH45JV. What makes this rack far superior to the others is the attachment system. It uses only...
Comparing Rhino Rack Roof Rack Options for a 2013 Infiniti JX35
Im wondering if you can tell me the difference between these two Rhino Rack products:RRVA137B-2 RRRLKVA RR86GR for my 2013 Infiniti JX35 | The biggest difference between the two roof racks you referenced for your 2013 Infiniti JX35 is the style...
Recommended Trailer Hitch and Wiring for 2013 Infiniti JX35
I have a 2013 jx35 and Im looking at the Curt III trailer and the Draw Tite, I believe. Its mostly going to be for bike racks and such but eventually we will get a small trailer for hauling things. I think I read that the curt was not the...
Is There a Photo of Hitch Receiver 76031 Installed on a 2013 Infiniti JX35
I would love to see what this will look like on the vehicle. Thanks. | We are always adding new vehicles and parts to our library of photos and videos, but at present we do not have a photo of this hitch installed on a 2013 Infiniti JX35. I...
4-Way Trailer Wiring Harness Recommendation for 2013 Infinitiy JX35
I have a 2013 infiniti JX35 and bought a wiring harness, Curt # c56584 which was identified as the proper harness adaptor. I Dont see where the vehcles factory 7-way connector that is suppose to be on drivers side near the rear of vechicle.l...
Options to Install a Brake Controller and Trailer Hitch on a 2013 Infiniti JX35
I am interested in installing a hitch and an adapter for the prewired line for an electric brake for my Infiniti JX 35. Is this harness compatible with the Infiniti JX35 pre wired connector? As for the hitch, I believe that except for the...
What is Difference Between etrailer Trailer Hubs # AKHD-655-6-K and # AKHD-655-6-EZ-K
Hello, I need to replace a Lippert part 122463. I see you have AKHD-655-6-K and AKHD-655-6-EZ-K. Is the only difference the grease cap or is the actual drum different at all for the EZ lube vs non EZ lube. I already have the caps so I...
Troubleshooting Wiring Harness Installation for 2013 Infiniti JX35
I messed up. I send a question and you graciously answered. However I included the wrong model number. Can I please try again. 2013 Infiniti JX 35. Installing Curt 56281 trailer light connector. Kit has 2 extra relays the instructions state...
Recommended Replacement Shock for a Dexter Axle 052-003-00
have a Arctic fox 365v 40foot trailer the shocks ar 052-003-00 they seem a little light for this bib of a rig 14900 dry weight What is your recommendation | I'd recommend sticking with what you've got currently. If the shocks feel a little...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
Is it Possible to Need a Larger Gauge Wire with the Solera 12V Electric RV Awning Conversion Kit
I am going to convert my awning to 12 volt. My batteries are in the front compartment an my fifthwheel. My switch will be mounted at the rear door of my fifthwheel. The distance is about 25 is 14 gauge wire okay for that distance, or should...
Recommended Brake Controller and Wiring for a 2013 Infiniti JX35
I have a 2013 Infiniti JX35 which has the a hitch and trailer wiring already installed. What brake controller do you recommend, in this case? | For a 2013 Infiniti JX35, I recommend the Tekonsha Prodigy P2 Brake Controller, # 90885. The P2...
Trimming Rear Fascia to Install a Trailer Hitch on a 2013 Infiniti JX35
I have a curt Hitch that Im going to install on a JX35. When I cut the Fascia is the cut 2 1/2inch total? So if I mark the center of the Fascia it would be 1.25 each side of center mark making the cut 2 1/2inch wide? | Yes you are correct....
Roof Rack to Carry a Thule Hullavator on a 2013 Infiniti JX35
Hi: Im considering getting a Thule Hullivator for a Hobie Outback. My SUV is a 2013 Infiniti JX35 with no crossbar, just the standard factory rails. What would I need to buy to get the Hullivator to work? Thanks in advance! | From my research...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
How Does the Draw-Tite Max-Frame Trailer Hitch Receiver Install on my 2013 Infinity JX35
Hello, I am looking to buy the 2013 Infiniti JX35 - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2. The link to your installation pdf is not working. Could you send that to me? And do you recommend I take it to a professional...
Filter Your Search
Contact and Help