Westin Bumper Mount Kit for 1986 Jeep Commanche
I just got one of your sure step bumpers and I think I need the installation kit. Can you tell me which to order for my 1986 Jeep Commanche. I think it would be the same as the 1987 but Im not sure. Thanks | Westin doesn't have record of which...
Replacement Windshield Wiper Blades for 1997 Lexus LX 450
Why is one 16inches and one 18inches when both should be 18? 1997 lx 450 is the vehicle. is the scrubblade bigger? and has clearance issues? | Actually, Scrubblade recommends the # SC87FR 18 inch blade for the driver side and the # SC67FR 16...
Westin Diamondstep Bumper For A 1989 Jeep Comanche
I am buying this rear bumper for a 1989 Jeep Comanche. In addition to the bumper, do I need to buy any additional parts, installation kit to be able to install on the truck. The current rear bumper on the truck is the original and there have...
Complete Flat Towing Setup for a 1988 Jeep Comanche Using A Blue Ox Tow Bar
Hello, Will your Demo DM9518010 base plate work with my Blue AX Alpha tow bar? Second question, My 1988 Jeep Comanche is 2WD. Is it safe to flat tow in Neutral? It has an AX4 transmission. | The Demco Classic Base Plate Kit # DM9518010 you...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Rear Bumper Mount Brackets for a Westin DiamondStep or SureStep Bumper on a 1988 Jeep Comanche
I see reviews for ram trucks but nothing for an 88 Jeep Comanche how can I be sure Id be getting the right ones | The Custom Installation Kit for Westin Diamondstep and Surestep Bumpers # 92240 is desgined for 1994 to 2002 Dodge Ram 1500, 2500,...
Left Signal on Trailer Flashes when I Indicate Right Turn
I have a 96foot LX450. When I signal a left turn all works as it should. When I signal right, the lights on the right side passenger side of the trailer go out and the left turn signal blinks on the trailer. All the lights work properly on...
Redarc Auxiliary Battery Isolator for 1992 Jeep Comanche with 90 Amp Alternator
I have a 1992 Jeep Comanche, which has a 90 amp alternator. If the trailer battery is 12 volts, 115 amps, do I need to increase the alternator amps and go with the 200 amp charger? | You basically just need to go with the Redarc Smart Start...
Rear Bumper to Fit 1991 Jeep Comanche
rear step bumper black powder coated 3500 capacity for 1991 jeep commanche truck | We carry two rear bumpers for the 1991 Jeep Comanche, part # 73000-97900 which is chrome plated and part # 63000-97900 which is black powder coated like you're...
Will The Westin Fey Diamondstep Rear Bumper # 63000-97900 Fit A 1986 Comanche
I was wondering if it would fot on a 86 long bed says it only fits 87-92 but is there a completely different mounting bracket i would need to make this fit? Or is there no chance at all I’m getting it on there? | Your 1986 Jeep Comanche is not...
Recommended Tire Chains For Off-Road And Snow Use On 1996 Lexus LX450
Please recommend snow tire chains for my 1996 LEXUS LX450. The truck has a 2inch lift for additional ground and tire clearance. Tires are Goodyear Wrangler Duratrac 265/75-16. The chains will be used on four wheels on snow and ice covered paved...
How To Mount Westin Fey Diamondstep Rear Bumper On 1986 Jeep Comanche
will the Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel Item # 63000, fit a 1986 Jeep Comanche? why only 87 and up, what is different about the 86 that would make it not work? Thanks for your help. | The Westin Fey Diamondstep...
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
What Size Dowel Nuts Do I Need for My Vehicle?
Where can I find the dowel nut replacement bolt for gutter mount. Its for an 1996 landcruiser | We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded...
Trailer Wiring Availability for a 1989 Jeep Comanche
Im looking for a towing wiring harness for an 89 jeep Comanche pioneer, but all I see available is for a Cherokee. Can you tell me if these are the same? Im having all sorts of trouble getting it to work spliced directly to the existing wires,...
Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
Brake Controller Installation on 1997 Lexus LX 450
looking for a Prodigy direct plug in wiring harness for a 1997 Lexus LX450. Do they make one or do I have to use a universal and wire it myself? | The 1997 Lexus LX450 was not factory equipped with the connector under the dash for a plug and...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
Filter Your Search
Contact and Help