How Thick is the Metal Used For the Butt Hinge w/ Non-Removable Pin # MA37ZR
Ma37zr hinge Need to know thickness of metal | The Butt Hinge w/ Non-Removable Pin # MA37ZR is 0.180" thick or approximately 3/16". It works great for heavy-duty trailer doors or ramp doors that typically require multiple hinges. |
Do Marlboro Piano Hinges Have Weight Capacity
I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Do The Marlboro Continuous Hinges Have A Load Rating
ID LIKE TO USE THE 6inch PIANO HINGE TO HINGE A CONVENTIONALLY FABRICATED WOODEN WITH 2inch LUMBER ATTIC STAIR IN MY GARAGE - INTENT WOULD BE TO DRILL MOUNTING HOLES INTO HINGE ON 4inch CENTERS AND BOLT HINGE TO ATTIC JOISTS / STAIR ASSEMBLY...
Can The 4" Wide Continuous Hinge Be Cut Down To A Different Length?
Was thinking about using something like this on a belt puller clamp, but we do not need the full 6foot length. Could we cut this down to something around 16-18? If no we may just weld on a couple smaller hinges | Yes, the 4" Wide Continuous...
Replacement Hinge For A Front Hatch/Door On A 2003 Keystone Everest 5th Wheel Camper
My front hatch/door hinge broke. I need replacement. 2003 Keystone Everest 5th Wheel Camper. Can you help? | The door on your 2003 Keystone Everest 5th Wheel Camper will have a continuous hinge. I do not know the dimensions of the door in question,...
What 3" Wide, 6' Long Hinge Has a 3/16" Thick Side Plate?
I was needing to know the thickness of the plate on both sides of the barrel. It looks to be about 1/8”, but was needing to know for sure before I order. I need it to be at least 3/16” | The side plates on the 3" Wide Continuous Hinge # MA65VR...
Recommendations for a Transition Hinge for a Cargo Trailer Ramp
do you carry a cargo trailer ramp gap transition hinge? | The best hinge we have for your application is the 6" Wide Continuous Hinge - 1/2" Pin Diameter - Steel # MA32VR (8' long) or the # MA52VR (6' long). Since both of these hinges measure...
Can 3" Wide Continuous Hinge # MA75VR be Shortened
Can I shorten this hinge? | Yes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could. |
Are There Any 2" Wide Piano Hinges With A 1/4" Pin And 83-1/2" In Length
Im looking for a piano hinge for a 1995 Starlite pop up camper rear fold down door. It is 2x 83 1/2 with 1/4 pin. | We currently only offer a 2" piano hinge with a 1/4" diameter pin in a 72" length so you would need to purchase two and cut one...
Looking For Barrel Hinge For Horse Trailer Tack Room Door
Im looking for barrel Is hinge for my horse trailer tack room door. | Hello Kristine. We carry quite a few hinges and barrel hinges, so we very well may have what you need. If you can provide some dimensions for the hinge, I can take a look...
Weight Rating for Weld-On Hinge w/ Brass Bushing and Grease Zerk
What is the recommended weight that this hinge can handle? | I reached out to Marlboro Manufacturing and found that the load carrying capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk # MA89ZR is 576 lbs. |
Is There A 4' Long x 6" Wide Continuous Hinge With A 1/2" Pin Size Available
I need a 4’ hinge x 6” , 1/2” pin. Do you have that or do I need to buy a 6’ hinge and cut it down? Thanks | We do not currently carry a continuous hinge in a 4' length so you would need to get the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin...
Replacement Clearance Lights and Compartment Door Hinges for a 2014 Keystone Apache
I am having difficulty locating replacement parts for a 2014 Keystone RV Apache exterior clearance lights and also compartment door hinges. Can you help? | It looks like the 4" long x 1-1/2" tall x 15/16" thick Optronics LED Trailer Clearance...
Availability Of 3" Wide 4' Long Aluminum Hinge With A 3/8" Pin
looking for an aluminum hinge 3 W x 4 L x 1/4 Thick with 3/8 pin quantity 5 | It appears we do not carry a hinge that will fit those parameters exactly. We do offer a few 3" wide continuous hinges with a 3/8" pin like the # MA94ZR. This is a...
What is the Weight Capacity of the 10-1/4" X 3/4" Barrel Hinge MA89ZR?
I am looking at your 10 inch by 3/4 in barrel hinge can you tell me the weight limit they hold | I checked with the manufacuterer and the 10-1/4" Long - 3/4" Weld-On Hinge w/ Brass Bushing and Grease Zerk item # MA89ZR has a 576 lbs weight capacity....
Weight Capacity Of Marlboro Continuous Piano Hinge
How much weight can this support and can it come in 8foot | Hinges like the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin Diameter - Steel # MA52VR do not have weight capacity ratings and it is up to the installer to determine if it will be...
Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes
I was looking at your 6 wide continuous hinge 1/2 pin diameter but in your picture I didnt see any holes for the screws or I have drill my own holes. | The 6" Wide Continuous Hinge - 8' Long - 1/2" Pin Diameter # MA32VR you referenced along...
Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
I need a replacement Zerk fitting for a skid wheel. What size do I need for the following model? and do you carry? 48-979023 UltraFab Weld-On Jumbo Steel Roller Weld On - 2-1/2inch Wide x 3inch Tall Item UF48-979023 | Hello Gaby. I reached...
Can 6" Wide Continuous Hinge - 8' Long be Cut Down to 7 Foot
Can I cut it down to 7’ and not rune it? | Yes, you can cut the 8 foot long hinge kit part # MA32VR down to 7 feet in length and it would work great. |
Can The Marlboro Continuous Hinge Be Cut Down To Fit Different Lengths
I have a vertical application where I am hanging a heavy mirror with large wood frame to a wall, for it to swing out like a door. Im confident this will take the weight 55 lbs. However, i only need 65 inches in length. Can i cut the bottom...
Does The 4" Wide Continuous Hinge Have A Rust Preventative Coating?
Does this hinge have any kind of coating to prevent rust? Or does it need painted? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter # MA85VR is made from mill finished steel with a commercial die cut quality, however they are not...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
How To Pick Out the Correct Replacement Piano Hinge for a Cargo Ramp Door
Looking for a heavy-duty piano hinge for a cargo trailer door ramp. 58-60 in length. Thank you | The main factor in choosing the correct replacement piano hinge is pin diameter which then in turn, denotes capacity. The hinge width and material...
Filter Your Search
Contact and Help