Trailer Hitch Receiver Recommendation for 1970 Chevrolet Chevelle
Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...
Trailer Hitch and Wiring for a 1970 Ford F-100 Styleside with Standard Bumper
Can you provide some additional info on receiver hitch options that allow the retention of the factory spare tire location under the bed? I have the long styleside bed with standard step bumper. | Modification and/or relocation of the spare...
Will B&W Trailer Hitch 40050 Fit 1970 Ford F-250?
will this fit a 1970 ford f250 4x4 thanks | The B&W Trailer Hitch # BWHDRH25122 is a confirmed fit for a 1970 Ford F-250 pickup with a standard or step bumper, regardless of if it is a 4WD or 2WD, and is designed to allow fits for both 34...
Recommended Chrome Rear Bumper for a 1970 Chevy C10
1970 c 10 chevy step side rear crome bumper and brackets | The Westin Fey Diamondstep Rear Bumper part # 21000 is recommended for a 1970 Chevrolet C10. It does not however come with brackets as there are not any for this application but you...
Trailer Hitch and Wiring for 1970 Ford F-250
Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...
Progressive Dynamics RV Converter and Smart Battery Charger for Flooded Lead Acid Batteries
Progressive dynamics charger converter. Looking at the 45 watt and it says lithium. Will it work with flooded lead acid? | For flooded lead acid batteries we do have the converter you need, which is the Progressive Dynamics 9300 Series RV Converter...
Recommendation for Timbren Rear Suspension Enhancement for a 1970 GMC C-10 Pickup Truck
Timbren REAR kit for 1970 GMC 1/2 ton w/ leaf springs | The correct Timbren rear suspension for your 1970 GMC C-10 is Timbren Rear Suspension Enhancement System, # TGMRC10A, that you have referenced. I have included a link to the installation...
What is the Width Between The Mounting Plates On The Leveling Scissor Jack # JSC-24-IND?
What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |
Do Any of the Jerry Can Holders Fit a 1970 Toyota FJ40 Land Cruiser?
do any of the jerry can holders fit a toyota fj40 spare tire mount? looks like they are only for jeeps. thanks. | I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR...
What Are Dimensions of Spacer Tubes Included in Reese Super Titan Hitch # 38208
What are the dimensions of the spacer tubes? | According to my contact at Reese the four spacer tubes included with their Super Titan 4000 Trailer Hitch # 38208 measure 15-inches in overall length and have a cross section that is 3-1/2 x 3-1/2-inches....
Class V Trailer Hitch Availability For A 1970 Ford F-250
Looking for a 15800 Curt tow package for my 1970 f 250 pichup | I do have some solutions for your 1970 Ford F-250, however, the Curt Trailer Hitch Receiver # C15800 you reference is not a fit for your truck. If your vehicle has the deepdrop...
Dimensions of Curt Trailer Hitch Receiver 13900
Can you tell me what the measurement is from the bottom of the vehicle frame to the top of the cross tube and from the bottom of the frame to the top of the receiver tube? Seeing if this will work on my 1963 Dodge D100. | The Curt Trailer Hitch...
Determining Which Size Screws Should Be Used To Install Tow-Rax Strap Hanger TWSP25SHA
what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer? | The Tow-Rax...
Comparing Proportional and Time-Delayed Trailer Brake Controllers
I also tow small trailers, as well as a 12,400lb camper. Should I get a time delay controller? | In regards to choosing an electric trailer brake controller, you have proportional and time-delayed options. The best option would be a proportional...
Should the Coils Be Removed to Install the AirLift 1000 Drag Bags # AL60844
Hello! I purchased airlift part number 60844 for my 1970 Buick Skylark. I am replacing the Buicks original springs with new front and rear coil springs and have a similar question: do the coil springs need to be removed before the airlift is...
Tonneau Cover to Fit 1970 Chevrolet El Camino
do you have correct fitting tonneau for my 70 chev el camino | As a matter of fact we do. The Craftec Hatch-Style Tonneau Cover # 252198 is confirmed to fit your 1970 Chevrolet El Camino. This tonneau cover has a light aluminum frame and gas...
Which Mount Is Required For Opti-Brite LED RV Dome Light ILL29CB?
Need item # and price for mount on light ILL29CB and a picture | The Opti-Brite LED RV Dome Light - 500 Lumens - Grommet Mount - 4" Round - Clear Lens # ILL29CB you were looking at gets mounted in a 4" round grommet # A45GB. This will require...
Recommended Electric Cooling Fan for 1970 Ford Mustang with Cleveland 351 Engine
I have a 1970 mustang with a 351 Cleveland engine! Have had a heating problem forever!Runs about 215-220 temp when sitting still in the summer! What do u have to help me with that? | The Flex-a-lite 15" Black Magic # FLX160 is the best available...
What Size Wheel Studs Fit Through Trailer Wheel # AM20758
I know this wheel is made for 1/2inch wheel studs but Im wondering what the actual lug bolt hole size in the wheel is. Also does it us the standard 60° conical lug seat? Thank you for your help. | The wheel bolt hole diameters of the # AM20758...
Circuits Needed on 7-way to Install Curt C51180 Echo Brake Controller on 1970 Chevy C10 Pick Up
I have a 1970 Chevy C10, with a 7 pin already in place. What must the 7 pin have to have wired in order for the Echo to work right... Thanks | The 7-way on your 1970 Chevy C10 would need to have functional lighting circuits and a 12-V power...
Trailer Hitch That Exits Through License Plate Area with a Roll Pan
Which trailer hitch for C10 1970 allows for a behind the license plate mounting. no . also, i want to combine this with a roll pan rear with tilt away license plate no bumper Truck is a longbed with coil rear springs. | I do have a trailer...
Dexstar Steel Mini Mod Trailer Wheel for a 1970 Chevy K10 Truck
Sirs...Could I use one of your 16 trailer tires on a 6 lug, 1970 Chevy K10 truck..Looking for the look of a stock 1970 6 lug wheel but 16 inches.Thanks | Yes, you can use the Dexstar Steel Mini Mod Trailer Wheel item # AM20757 on your 1970 Chevy...
RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide
I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...
How Large Of a Mounting Hole Is Needed For the Backup Light w/ Chrome Housing # BU11CS?
What is the diameter of the light socket mounting stud? It appears that a drilling is required for the mounting surface. Is a bulb light included? Can an amber colored be used and what is the bulb specification? Thanks. | To install the Backup...
Filter Your Search
Contact and Help