Is Just the Tabletop Available for the Octagonal Boat Table
Looking to purchase the table only is that an option? | We do not have just the tabletop available for the Octagonal Boat Table # 315-DSI-KS. The only way to get the top is with the whole # 315-DSI-KS set. |
Recommended Trailer Winch for 25 Foot Pontoon Boat
will this work on my 25 ft sun tracker pontoon boat | The Jif Marine 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs # 315-W3200D will work well with your 25 foot Sun Tracker Pontoon Boat. The only thing to consider is if you...
Does the 2-Speed Boat Trailer Winch with 20' Strap and Brake Come with Mounting Hardware
does this come with the mounting hardware? | The 2-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W3200D does not come with mounting hardware. This is the case with all of our winches. |
Replacement for Fulton Boat Trailer Winch T3205
I would like to replace this winch with whatever model you recommend. I want a 3200# strap winch. Thanks | The Jif Marine 2-Speed Trailer Winch part # 315-W3200D will be a great replacement for your Fulton Boat Trailer Winch T3205. |
Why Would Stoplights Light Up all The Time After Install of New Trailer Wiring Harness
I just installed a new wiring harness on my little trailer. Everything lights up but the stop lights glow brightly continuously without depressing the brake pedal. Any clue? Thanks. | Sounds like maybe you have the running light circuit ran...
Recommended Hand Winch for 4,600 Lb Boat Trailer
I need a winch for my boat trailer. The weight of the boat is 4600 pounds and I have a load rite trailer with rollers. The electric winch stopped working last fall. Im fine with a manual since I only pull my boat out once a year. Thanks! | There...
Recommended Mounting Screws For The Jif Marine Telescoping Boat Stern Ladder # JIF35FR
What size screws are recommended to attach the Jif 4 step ladder? Thanks. | The mounting holes of the Jif Marine Telescoping Boat Stern Ladder # JIF35FR are 8mm in diameter. The type of screw you would use for these holes depends on the application....
Comparing Jif Marine Hand Winch 315-W2500D and Fulton Winch F142412
I notice that the Fulton winch has multiple layered gears as opposed th the Jiff winch which has 1 piece gears. Is one superior to the other for strength/durability? | Both the Jif-Marine 2-Speed Boat Trailer Winch # 315-W2500D and Fulton High-Performance...
Jif Marine Gunwale Hook Ladder DMT3A-11 Hook Depth
Could you measure across the inside opening of the hooks to see how wide of a gunwale it would fit. Thank you | The hook depth on the Jif Marine Gunwale Hook Ladder # JIF93FR is 11". This means that as long as your gunwale is 11" or less you...
Mounting Hole Spacing on the Sliding Under Platform Pontoon Boat Ladder
Hello, what is the measurements between the bolts? Im trying to match this up to replace my OEM yamaha transom ladder. It looks identical, but Im worried about the mounting points. | The Sliding Under Platform Pontoon Boat Ladder # 315-FOG3...
Determining Correct Mounting Hardware For Quick Release Mounting Plates JIF27FR
What Mounting Hardware do I order for the JIF Quick Release Mounting Plates? | The correct mounting hardware for the Quick Release Mounting Plates for Jif Marine Straight or Lifting Dock Ladders - Aluminum - Qty 2 # JIF27FR you were looking...
Boat Trailer Winch that Has Capacity for 18,000 lb Boat
I have a 38’ boat weighing 18,000 lb on a float on trailer. I had a hand winch that broke and want to replace it. What winch do you recommend ? When I haul I back the trailer in a few times and crank the boat on at the same time. I don’t get...
Base Dimensions of the Single-Speed Boat Trailer Winch Part # 315-W1800D
I need the winch to fit in a 3 3/8inch space. Can you tell me the base dimensions please | I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part # 315-W1800D for you. The dimensions of the base are as follows; 6-1/4"...
Recommended Two Speed Trailer Winch For 6500lb Boat.
I have a 6500# boat. Looking for a 2 speed winch. Pls advsie | For your 6500lb boat I highly recommend the Jif Marine 2-Speed Trailer Winch # 315-W3200D which has 2 speeds like you were looking for, and the 3200lb capacity will be plenty to...
What Material Is The Jif Marine Telescoping Drop Ladder with Hand Grips # 315-EQB4 Made From?
JIF website says 304 Stainless your description says 316 Stainless Is the new ladder an upgrade to 316 ? | The Telescoping Drop Ladder with Hand Grips # 315-EQB4 is made of 304 stainless steel. The Jif Marine ladders have always been made of...
What are the Dimensions of the Jif Marine Single-Speed Boat Trailer Winch Mounting Holes?
Are the bolt hole dimensions, center to center 3” apart and the single bolt hole 4” to center? See pic of bolt hole diagram. | The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake...
Shorter Handle For Jif Marine 2-Speed Boat Trailer Winch # 315-W3200D
Hello, I bought this winch but realized the handle was too long and hits my boat as I try to turn it. I realize this is my own fault for not measuring before buying, but was wondering if you had any handles that were 6-8inch that would be able...
Operation of Brake on JIF Marine 315-W3200D 2-Speed Boat Trailer Winch
Does the brake on the # 315-W3200D apply ON/OFF or will it DRAG to let the strap out continuously and slowly? | The brake is strictly an On/Off proposition. When it's in neutral, the strap can be pulled out easily without the handle turning...
Replacement for Discontinued Fulton T3205 Winch
I need to replace my fulton T3205 winch, I want it to be the same as possibly can? Also is it compatible with strap? Thank you | The replacement that I recommend for your Fulton T3205 is the 2-Speed Boat Trailer Winch with 20' Strap and Brake...
What is the Measurement From the Apex of the Hook to the Stand-Offs
On the 3 step telescoping gunwale ladder, what is the distance from the apex of the hook to the stand-offs and are the stand-off moveable up or down ? | The Jif Marine Telescoping Gunwale Hook Ladder # JIF28FR measures 38" from the apex of the...
Will Jif Marine Folding Transom Ladder Fit a 2014 Ranger Bass Boat
Does this fit a 2014 Ranger RT178 bass boat | The Jif Marine Folding Transom Ladder # JIF23FR is a universal option so as long as you have 8" tall x 12" wide transom space then this will fit your Ranger bass boat. |
Can the Rectangular Boat Table Be Put Up and Taken Down Each Time
Is this table meant to be put up and taken down at each use? Im looking for something I can stow away and put up easily when needed, storing the table leg and table top separate from each other. Its it just a slip fit into the table top or are...
Determining If Jif Marine Folding Pontoon Boat Ladder Will Fit 1974 Tahiti Tiger Bubble Jet Boat
I have a 18 ft 1974 Tahiti tiger bubble jet boat. Will this work if I install the holders on the rails? | It is possible that the Jif Marine Folding Pontoon Ladder - 5 Steps - 54-1/2" Tall - 300 lbs - Aluminum # JIF48FR you were looking at will...
Transom Savor Recommendation For Small 8 Plastic Boat With 2.5 HP Motor
I have a 5X8foot plastic boat, a small Box Trailer and a 2.5 Motor. I would need to attach the saver to the trailer, and I think I would need the the saver with the rubber that goes to the motor. The boat will be securely strapped down to the...
Filter Your Search
Contact and Help