Safety Chains Compatible With Shocker 5th Wheel to Gooseneck Pinbox # SHK23MR
What safety chains will fit on this Shocker pin box? | The Safety Chain Kit # SHK35MR is compatible with the Shocker 5th Wheel to Gooseneck Pinbox # SHK23MR. The chains are each 42" long with clevis hooks to attach in your bed. |
Recommended Sway Control When Towing a Travel Trailer Without a Weight Distribution Hitch
We have a 2015 Ram 5500. Will be towing a 38 TT. We dont really require a WD sustem, but want to have an anti sway device. Best recommendation? Electronic looks good but dread installation due to belly covering. Mechanical choices? | I...
Is There a Way To Replace The Coupler on a Travel Trailer For One That Would Be Longer For Clearance
I have a 2023 Highland Ridge travel trailer. It has a 2-5/16 ball 14,000 lb. A frame coupler about 12 long. I added a 14 shank for clearance and still need more. Can you recommend a coupler that is 5-6 longer? | The only way I can see increasing...
Width and Compressed Height of Replacement Air Bag for Shocker Air Receiver Hitch
I would like to know the outside diameter and the collapse height of the air bags used with the Shocker Hitches. Thank you | The width of the Replacement Air Bag for Shocker Air Receiver Hitch # SHK75RR is 7". The compressed height is approximately...
Is the Shocker 5th Wheel to Gooseneck Pinbox Covered Under Lippert's 1 Year Frame Warranty?
Will using this pin box adapter void Lipperts frame warranty | Yes, it will. Lippert does not extend their 1 year frame warranty to cover the Shocker 5th Wheel to Gooseneck Pinbox for Lippert 1621/0719 and Rhino Box item # SHK23MR or for the...
What Are the Frame Tabs Called That a 5th Wheel Pin Box Mount to?
Hi, I have my small fifth wheel at a local welding shop to get a quote. A previous owner cobbled together a goose neck ranch style hitch to the fifthwheel. In doing so, he butchered the ttrailer framing tabs that stick down into where the pin...
Adjustable Ball Mount Recommendation that Can be Used with Friction Sway Control
I have a 2018 RPod trailer, that I want to pull with a 2007 Toyota 4-Runner. Ive pulled stock trailers and popup campers, but this Rpod is taller and lighter. Im wondering about a sway bar...I just got a Trimax TRZ6AL adjustable hitch will the...
2" Hitch Ball For Use On Shocker Hitch HD Air Ball Mount # SHK22VR For 7-1/2" Drop
Can an additional 2” ball and carrier be purchased separately. The dual ball 2” and 2 5/16” didn’t offer the 7” drop option unless I missed it. I need both sizes readily available. Is this hitch compatible with rock tamer mud flaps? | Yes,...
Is Air Bag Replaceable for 20K Shocker Hitch HD Air Ball Mount
Can I get a replacement air bag if this one fails? | Great question! The air bag on the 20K Shocker Hitch HD Air Ball Mount # SHK23VR is replaceable with part # SHK25RR if the need arises. I've spoken with Shocker Hitch in the past about how...
Is There A Clevis Style Ball Mount Available For A 2-1/2 Hitch
Do you have one of these but for a 2.5 inch hitch? AMCC2 | I do have something similar to the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle # AMCC2 designed for a 2-1/2" hitch, but this is currently only offered in 2". With that said,...
Air Bag Inflation Instructions for 30K Shocker Hitch Air Cushioned Gooseneck Coupler
What are the instructions for filling up the air bag and is a replacement available in the event that it wears out? | The instructions for filling up the Shocker Hitch Air Cushioned Gooseneck Coupler # SHK47MR air bag are to fill up the air...
Gen-Y Torsion Ball Mount or Shocker Hitch For 3 Inch Hitch Receiver
What is better the shocker air or gen y hitch | Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires...
Recommended Shocker Hitch Air Cushioned Ball Mount
Hi I have a 2023 ford ranger with the curt C13417 trailer hitch. Do you have a shocker hitch that you recommend for this truck and hitch combination? | Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item # C13417 on...
7k Axle Hub/Drums Leaf Springs and Equalizer Kit
Hello, I am looking for 2 7,000 pound Dexter style axles, complete with drums, brakes, bearings, and suspension and mounts. The current spring to spring center is 64, and hubface to hubface without drums of 70. | I wish we had the axle configuration...
How to Tell if Shocker Hitch and Rock Tamers Will Fit Together on a 2022 Ford F-350 Super Duty
Does this hitch work with rock tamers on a 2022 f350? How much does it weigh? | Hey Chris, thanks for reaching out! If you have 3" or less spacing from the center of your hitch pin hole to the face of the receiver then this ball mount will...
Measurement From Hitch Pin To Welded Tab On Shocker Hitch HD Air Ball Mount # SHK22VR
Looking at buying SH-HD640-250-25-X2 I need to know what the distance is from the hitch pin holes to the vertical black section that is welded above the hitch shank. Need too be Sure I have sufficient clearance. I can forward a picture of what...
Main Frame Drop On Shocker XRC Cushioned Adjustable Drop Ball Mount with 2" Ball # SHK22ZR
How many inches are there from the top of the hitch shank to the lowest point on the hitch or ball that hangs down? I have a driveway approach that slants up an my lowest point of clearance is about 10inch to the bottom of the receiver. If...
Replacement Air Bag for 12K Shocker Hitch Air Cushioned Ball Mount
What is the replacement air bag for the SHK29VR shocker hitch? | To replace the air bag that comes with the 12K Shocker Hitch Air Cushioned Ball Mount # SHK29VR you need the following part: - Replacement 5810 Air Bag for Shocker Air Receiver...
Troubleshooting Sway With An Enclosed Car Hauler Trailer
good afternoon, interesting problem. just got a 24 foot enclosed car trailer, went on a trip , had to move car three times to get it to tow at speed on interestate. once i got car set, towed fine. truck was loaded with approximately 1000 lb.....
What 2-1/2" Hitch Helps Reduce Chucking when Towing?
I'm getting a lot of chucking on my 2-1/2 hitch while towing with a 2-inch ball coupler. Is there a hitch I can use that has some kind of suspension support built-in? | For a great solution to decrease chucking on your 2-1/2" receiver while...
Does The Shocker Air Equalizer For WDH Fit The Reese Steadi-Flex WDH Head?
Will this work with the Reese Steady Flex WDH head. | Yes, the Shocker Air Equalizer for Weight Distribution Hitch # SHK68VR does fit your Reese Steady Flex WDH head. |
Adjustable Ball Mount With Sway Control Tab That Accepts Locking Pin Rather Than Bolts
is there a keyed alike 1/2inch locking pin set that can be used instead of the supplied 1/2 inch bolts? If so, would they meet/exceed the grade 5 rating? Im driving a 2011Honda Pilot, pulling a 2012 Casita 17foot trailer. | I do have some options...
2003 Ford Heavy Duty 1 ton crew cab 4x long bed Dually truck. The unit I bought order number 120959395 has a range of 4 to 7.5 inches. Do you sell a reverse ball section that would raise the ball instead of lowering it? It would definitely...
What Length Shanks Are Offered for the Shocker Air Equalizer for Weight Distribution Hitch
Do they make 15 inch shank??? | There is only one size shank for the Shocker Air Equalizer for Weight Distribution Hitch, part # SHK68VR or part # SHK88VR. That said, we do have options for ones longer though you will need to forgo any cushioning...
Filter Your Search
Contact and Help