Compatibility of Tall Trailer Coupler Height With 1-1/4 Inch Receiver
I have a sled trailer that measures 10 inches from the bottom of the coupler and my receiver 1 1/4 measures 10 inches from the ground. I am looking for a set up as close to a 10 inch rise as possible. I believe the highest rise available is...
Reason Why BulletProof Hitches Ball Mount Measurements Differ From etrailer Measurements
Hi there - I just like to let you know that your bulletproof hitch, md206, is incorrect. According to Bulletproof website, it is a 6 drop and rise not a 8 drop and rise. You may need to have your site corrected. | You are correct, the BulletProof...
Adjustable Ball Mount for 2.5 inch Hitch with Longer Shank
Compare weight with steel hitch. I have a toyota sequoia with a rear lift gate and need a long shank hitch to open the gate and clear my trailer. Can the shank length be chosen? | If you are looking for an adjustable ball mount that fits a...
What Does Bulletprooof Hitches Shackle Hitch # ED20SHACKLE Weigh
Is the hitch tail a solid piece? How much does it weigh? | The BulletProof Hitches # ED20SHACKLE weighs 23 lbs total and the shank is all one piece. There's a total of three pieces that come with this. The shank, the shackle, and the pin that...
Recommended Longer Shaft Ball Mount For Tailgate Clearance
I have an 8inch FlashE adjustable hitch that is aluminum, 2 1/2inch shank, 2 5/16inch ball. I believe it is 8 7/8inch from center of pin hole to center of ball. I need a longer shank in order to open the tail gate on my truck. I had...
Ball Mount for 2 Inch Hitch with 4 Inches of Rise to Tow a 15k Trailer
I have a 2015 one ton Chevy with a flatbed. The hitch is to low. Wondering what products you have to raise the receiver 4” and still be able to tow 15k. My other option is cut and raise whole receiver into bumper | We have the BulletProof Hitches...
What Locking Hitch Pin Works with My BulletProof Adjustable Ball Mount # ED254?
I have the bulletproof hitch ED254. What locking hitch pin fits? | For a great locking hitch pin for your BulletProof Hitches Adjustable Ball Mount # ED254, I recommend the InfiniteRule Hitch Lock for 2-1/2" Hitches - 3-1/8" Span # 34061072-D....
Adjustable Ball Mount For 2-1/2 Inch Hitch With 8 Inch Drop
looking for an adjustable ball mount that goes to 8 inch drop and fits a 2-1/2 inch hitch | We have precisely what you need for an adjustable ball mount that fits your 2-1/2 inch hitch and gives you up to 8 inches of drop. The ball mount is...
Does BulletProof Hitch Item # MD256 Include 2 and 2-5/16 Inch Trailer Balls
BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2inch Hitch - 6inch /Rise - 14,000 lbs Item # MD256. Does this hitch come complete with a 2inch and 2 5/16inch ball set up or is it sold separately. | The US made # MD256 BulletProof hitch...
Availability of BulletProof Adjustable Ball Mount in a 4 Inch Rise
Hello Im looking for something like this with only a 4inch rise/ offset. Do you have anything? Im assuming that the standard adjustable hitches are not meant to be used upside down so that you can raise the ball instead of it. Please let...
Safety Chain Loop Solution for 2017 Chevy 2500 with Class V Hitch
Bought a boat with a Lund trailer and cant get the hooks through the hitch. Present hooks are too small. What do you suggest? | One solution that seems to work well with the factory hitches of the 2017 Chevy Silverado 2500 would be shackles...
Are Rock Tamer Mud Flaps Compatible With BulletProof Adjustable Ball Mount?
Hello, I have a 2016 Ram 2500 pickup and am considering purchasing one of your bullet proof hitches but I am wondering if there is enough room on the receiver to add a Rock Tamer to it? I believe it needs about 1inch space. Thanks | The BulletProof...
What Locking Hitch Pin Works with the BulletProof Hitches Ball Mount # HD308?
what locking hitch pin works with the BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch - 8" Drop/Rise HD308? | For a great locking hitch pin that fits the BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch - 8" Drop/Rise HD308,...
Availability of B&W Clevis Adapter with 1" Pin Hole
Hi, I need a clevis adapter for my BandW multi hitch. The BandW has 1 1/8 hole. Is there another clevis adapter that would fit a BandW but with a 1 hole? Thank you | While there are no clevis adapters with a 1" diameter hole, the 1-1/8" hole...
Recommended 2-1/2 Channel Mount For The LockNRoll Articulating Hitch 336VS503
Will the following channel mount Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs Item # 336VS503 fit the following BulletProof style hitch BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2inch Hitch...
BulletProof 2-ball Mount Adjusts in 1-inch Increments for 4 inches of Rise or Drop
What are the pin spacing increments measurements? Also - does it matter is it ok to use this in either direction - i.e. upside downinch for more height above the receiver, if needed? | The BulletProof # MD204 ball mount has 4 inches of rise...
Can BulletProof Replacement Hitch Ball Fit Other Shanks
Wanted to double check to see if the holes match between the Replacement 2inch and 2-5/16inch Dual-Sided Hitch Ball for BulletProof Hitches Ball Mount to the Curt Weight Distribution Shank - 12inch Long - 15-3/4inch or 16-1/4inch - 1,500 lbs...
Can the BulletProof Hitches 2-Ball Mount # HD204 Be Placed In a Rise Orientation?
I need the hitch to raise not lower, trailer 21in, car is 17 in, can I reverse and raise vehicle, trailer 3500 lbs. | Yes, the BulletProof Hitches 2-Ball Mount # HD204 can be placed in the rise orientation allowing for a maximum 5-1/2" rise....
Can 2" Coupler Be Installed on a 13K GVWR Dump Trailer
Question is: I have a double axel 12’ dump trailer that is 3500 ish # and can haul a 9500# load. It has a. 2 5/16 adjustable ball coupler I would like to change it to a 2” coupler. Do you make a 2” coupler for the weight of my trailer?...
Can I Use Weight Distribution Shank for BulletProof Hitches with Equal-I-Zer Hitch
Will this adaptor fit the 12k equalizer wd system ,I already have the bullet proof hitch | Yes. The Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount # 358WEIGHTDIST can be used with an Equal-i-zer weight distribution...
Is There a Ball Mount With 4" Drop Which Has Dual 2" Hitch Balls To Work in Rise or Drop Positions?
I’ve got two trailers and the rise and drop can be accomplished with one 4” drop bar. I’m looking for a double 2” ball. Does anyone produce them? Thanks, Michael | We are not going to have any option for a ball mount with 2" hitch ball on both...
How to Get the Rise Out of the BulletProof Hitches Adjustable 2-Ball Mount?
Part Number # HD208 for 2016 F150 with Heavy Duty Tow Package. To get the 8inch rise do you simply turn the hitch over and install into the truck? All of the videos only show a application. I have a dump trailer and when hooked up to my...
Highest Capacity Adjustable Ball Mount With 2-1/2" Shank
What is your highest capacity adjustable hitch with 2 1/2 shank | The highest capacity adjustable ball mount we carry for a 2-1/2" hitch comes from BulletProof Hitches. Each of the following has a 36,000 lb GTW when using the 2-5/16" ball: -BulletProof...
Does Curt MV Weight Distribution Hitch Head Fit Weight Distribution Shank Adapter 358WEIGHTDIST?
I ordered 358WEIGHTDIST will this product mount to this shank? | Yes. The Replacement Head for Curt MV Weight Distribution Systems # C17075 you were looking at will fit perfectly on the Weight Distribution Shank for BulletProof Hitches Adjustable...
Filter Your Search
Contact and Help