Height of Ultimate Trailer Jack # 322-RDJ-2K When Positioned at Lowest Setting
On the Ultimate A-frame trailer jack, can you tell me the measurement from the mounting bracket to the top of the jack when the jack is fully extended down? Also, what is the measurement from the mounting bracket to the bottom of the jack without...
Installing 322-RDJ-2K Ultimate Trailer Jack
I just purchased the jack and installed it. Then yeah then I read the instructions and noticed that they state 4 - CRITICAL you/I must Remove plastic retainer and apply either thread lock tape or locking compound to the threads of retainer bolt....
Best A-Frame Trailer Jack for Trailers With Limited Clearance
Looking for an A frame bolt on jack, 11inch above bolt on plate, 7inch below,. Approx 2 1/8inch diameter | The best bolt-on a-frame trailer jack we have for what you need is the Ultimate Trailer Jack part # 322-RDJ-2K. The reason for this is...
Recommended Manual and Electric A-Frame Jacks for a Snowmobile Trailer
I have a 2008 Wells Cargo silver sport 29’ v nose snowmobile trailer rated at 7000 # gross. I need an A-frame jack. What do you recommend, both manual and electric? Thank you | The best option for an electric A-Frame jack is going to be the...
Length of Jack Handle On Ultimate Trailer Jack # 322-RDJ-2K
Hi, just looking to find the center of jack to end of handle length. Have a side wind on my trailer now but only have to so much clearance to the front of the trailer body. | The Ultimate Trailer Jack # 322-RDJ-2K is 6-3/4" from the center...
Determining Height of Pro Series A-Frame Jack # PSEA20000103 for Tailgate Clearance
You have stated that the height of the PSEA20000103 from where it bolts to A-frame to top of jack is 11. Does this include the handle, which is generally about an added 2? I have a 2008 Toyota Tundra and the tailgate hits the top of my existing...
Measurements of Mounting Flange Slots on Ultimate Trailer Jack # 322-RDJ-2K
What are the measurements of the mounting flange slots from the adjuster ring | The slots on the Ultimate Trailer Jack # 322-RDJ-2K from the inside of the mount near the jack tube are 1/8" from the inside. The slot itself is 7/8" long putting...
A-Frame Trailer Jack that Has Lowest Height to Fit Under Tailgate
I’m interested in an A frame jack My current jack hits just barely my truck tailgate My current jack measurement from mounting bracket to top of handle is 13” Do you have any jacks that are approximately 11 1/2 “ from mount bracket to top...
What Is The Correct Footplate for the Ultimate Trailer Jack322-RDJ-2K
In your description you have it listed as having a 2-1/4 OD tube and a inner 2 inch. Wouldnt that mean a 2 inch foot plate would work for it. I looked at some other jacks and they are 2-1/4 OD and 2 inch inner and you have 2 inch foot plates...
Can Tube of Ultimate Trailer Jack 322-RDJ-2K Be Completely Removed
If a thief removes the pin, would they be able to steal your jack tube? Thieves steal anything not secured around here. | With the right tools and enough time a determined thief can steal almost anything. This is true for the inner tube of...
USA Made A-Frame 2,000 Lbs Top Wind Trailer Jack
Where is this jack made? Thanks | I reached out to my contact at Future 2 Solutions and he advised me that the Ultimate Trail A-Frame Jack # 322-RDJ-2K is made overseas. If you are looking for a USA made A-frame trailer jack, the Dutton Lainson...
Can Ultimate Trailer Jack # 322-RDJ-2K Be Mounted with Handle Facing Other Directions
I like almost everything I see with this Trailer jack, and I was almost ready to order....however...... I am getting ready to add a Tool Box to the front of my trailer, to house batteries for my 12V, Solar Backed Up System. The current...
Would Ultimate Trailer Jack # 322-RDJ-2K Fit 2017 Keystone Bullet RKS 248
Please confirm if this would be appropriate for a travel trailer Model 248 RKS. 2017 Keystone Bullet loaded tongue weight 800 lbs GVWR 6500 lbs | I looked up your 2017 Keystone Bullet RKS 248 and it is built on an A-frame trailer just like what...
Could Carriage Bolts be Used to Install Ultimate Trailer Jack # 322-RDJ-2K
Will carriage bolts work for installation? | You could use carriage bolts to install the Ultimate Trailer Jack - A-Frame # 322-RDJ-2K as long as you went with bolts that fit the slots of the jack's mounting flange properly. |
Ultimate Jack # 322-RDJ-2K Compatibility with 22 Foot Travel Trailer
I have a 22’ Travel Trailer, would the Jack be strong enough to handle the weight of the trailer, I would like to carry my motorcycle in the bed of my truck, I need my tailgate down in order to do this, I like the idea of being able to remove...
Replacement Handle For Ultimate Trailer Jack # 322-RDJ-2K
Can I order a replacement handle for this jack? The handle fell off of mine on the highway. | The knob on the handle of the Ultimate Trailer Jack # 322-RDJ-2K you have is not replaceable by itself, but you can replace the entire handle using...
A-Frame Trailer Jack For Older Military Trailer
hi. do you know of any companies that make a 24 vdc trailer tongue jack? I have an old military truck n trailer Id like to set up with one. thanks | There are no 24 volt A-frame trailer jacks, they do require a 12-volt power source. So what...
Can Electric Jack be Submerged in Water
If mounted on a boat trailer, will it withstand submersion? Launching and loading? | Electric jacks such as the Electric Jack w/ Footplate # EJ-3520-BBX should not be submerged in the water; they are resistant to rain but not being completely...
Will the Ultimate Trailer Jack Work With the Low Profile Replacement Footplate for RAM Jacks
Is the jack foot plate Item # JF-100-ZBK compatible with this jack? Looking for a low profile foot plate. | The Ultimate Trailer Jack part # 322-RDJ-2K should be compatible with the Replacement Footplate part # JF-100-ZBK. This is not something...
Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
Is there be a lower profile jack option? One that can be operated with a cordless drill or impact would be nice. My electric jack extends about 22" above the top of the trailer frame, 12-14" would be ideal. | Hi Robert, So there isn't one that...
Lower Profile Trailer Jack for Tailgate Clearance
Need advice on 10 Utility trailer jack. Mine on my CarryAll Trailer has been damaged. Would like a low altitude version that doesnt conflict with my GMC Pro tailgate. also, if I were to update my wheels and tires, which models would you suggest?...
A-Frame Jack Recommendation for Travel Trailer with Propane Tank Right Behind Jack
I love this jack for its low clearance. However I need it for my travel trailer and the jack is up against the propane tank. I would need a front crank or maybe electrical and the pin out of the tanks way. Any chance the manufacturer makes...
Troubleshooting Ultimate Trailer Jack 322-RDJ-2K That Wont Slide Up or Down
I installed the jack, then went to pull it up, and it wont move. It is stuck with the center part that is supposed to lift up stuck in the lowest position. I have the handle pulled and resting in the position that should allow the jack to slide...
Wheel Caster to be Used with Ultimate Trailer Jack
What wheel do you recommend for the ultimate trailer jack? Thanks | The wheel caster you need is the part # JC-102 to be used with the Ultimate Trailer Jack # 322-RDJ-2K. |
Filter Your Search
Contact and Help