How Much Does the 30 Inch UWS Chest Style Toolbox EC20121 Weigh
How much does it weigh and is it lockable? | The UWS Chest Style Toolbox part # UWS01009 only weighs around 25 lbs so it will be easy to move or take in and out of a truck bed or wherever else you will be using this. There is a lock on the handle...
Will the Mounting Hardware for UWS Truck Bed Chests Work with an Aluminum Truck Bed in a Ford
Is part# UWS08353 compatibly with a 2022 Ford Super duty aluminum truck bed to mount a UWS chest box #TBC-48-BLK? | Yes, the Mounting Hardware for UWS Truck Bed Chests # UWS08353 is compatible with the UWS 48" Standard Chest Toolbox # UWS01061...
Will Smittybilt Winch Fit Inside UWS A-Frame Trailer Toolbox UWS01064
Would this toolbox have plenty of space for a smittybilt xrc 9500 winch, battery box and storage for chains, pull straps, etc? | According to my research the smittybilt 9,500 lb load capacity winch measures 22.3 inches long by 9.4" inches tall....
Replacement Key for a 2015 V Nose Trailer With Lock CH501
I need a replacement key for my 2015 v nose trailer side door lock #501CH. CAN YOU HELP ME? | It looks like all you're going to need is the Replacement Key for UWS Toolboxes # KEYCH501. This has the same CH501 key as what you're looking at now,...
Weight of UWS04530 UWS Trailer Tongue Tool Storage Box
What is the empty weight of this product? | Minus the shipping packaging, the UWS # UWS04530 A-frame trailer toolbox weighs right at 18 lbs. |
How Does Replacement Black UWS Logo Badge # UWS99FR
I am getting a slim line low profile aluminum UWS truck tool box. It comes with a blue badge. I think it is attached by adhesive. can I rip it off and replace it with this black one? will I have to drill holes? thanks | The Replacement Black...
How Does UWS Stanchion for Toolbox Grab Rails # UWSSTACHONS Install
I dont see any holes in the base. Do you have to drill 2 holes in each stachon and in the tool box so they can be riveted together? | The UWS Stanchion for Toolbox Grab Rails # UWSSTACHONS normally gets welded on actually. There might be a...
Dimensions of Part # UWSRODCONNECTOR
Is this the only rod connector of this kind that you sell and I would like to know the spec on this rod connector. Thank you Richard Sanders | The # UWSRODCONNECTOR is the only rod connector we carry. I did include a link to replacement parts...
Availability of Non-Locking Handle for UWS Toolbox
hello i am looking for the non locking handle that goes with part number uws003-SLLKBLK i am unable to find it do you carry it? thank you | I checked with UWS and the closest non-locking version of the Replacement Lock Handle # UWS003-SLLKBLK...
How to Determine if UWS Truck Bed Fender Toolbox Would be Flush with Bed Rails
How far does this box protrude above the bed? I need something that is flush as I tow a fifth wheel and need clearance. | It's possible the UWS Truck Bed Fender Well Toolbox with Drawers # UWS01626 could be flush or below the top of your truck's...
Recommendation For Aluminum Toolbox Replacement Strut
I have an aluminum truck toolbox and need 2 struts for it. The contico part number shows 40231545. There is also AVM P3550B listed on it. Thanks. | We do not carry the Contico brand of tool box but we do offer a Replacement Lift Cylinder, Item...
Recommended Truck Bed Storage and Tool Box That Fits Under Tonneau Cover on 2018 GMC Sierra 3500
WILL THE SIDE MOUNTED WHEEL WELL STORAGE BOX FIT UNDER A TANOE COVER? | I may have a solution for you, but the top of the box of the UWS Truck Bed Fender Well Toolbox with Drawers - Passenger's Side - 3.9 cu ft - Bright Aluminum # UWS01625 sits...
Replacement Lift Cylinder for an Unknown Brand of Toolbox
I bought a used truck bed tool box with the tag missing so I dont know the brand. I need 2 lift supports, these numbers are on mine AVM P2316 can you help with some new ones? | The only toolbox lift cylinder we have is # UWSLIFTCYLIND so you...
What To Do With Locked UWS Toolbox and No Key
how do I proceed should I drill out the lock or replace the whole latch assembly buy drilling out the rivets | In regards to a UWS Truck Bed Toolbox, if the box is locked and there is no key then you have two options. If you know the key number...
Storage Cargo Box Similar to DeeZee Toolbox # DZ75 That Has Lid on Top of Box
I would like to mount the box so the lid is on top and opens like a trunk. Will the lid stay sealed and will the lid stay open in that position? Do I need to add length to the chain to use in that position - so the lid folds over a bit from...
Availability of Plunger Style Lock for GM Toolbox
I need a plunger type lock replacement for my gm tool box | It sounds like you are looking for a replacement lock cylinder like the part # UWSLOCKCH503. This is designed for UWS toolboxes with square paddle handles so I'm not sure about compatibility...
How to Remove Lock Cylinder from UWS Locking Paddle Handle
How to remove the lock cylinder from a UWS square paddle locking handle? | To remove the lock cylinder from the # UWSLOCKING you will have to remove the retaining nut on the inside of the box. See the diagram below. |
Weight of UWS Truck Bed Side Rail Toolbox # UWS04013
Can you tell me the empty weight for this box? Thanks | The UWS Truck Bed Side Rail Toolbox # UWS04013 that you referenced weighs just about 30 pounds. Its aluminum construction allows for this light weight while also maintaining a durable...
Dimensions of Replacement Striker Bracket for UWS Truck Tool Boxes
What are the dimensions of the UWS-SBRACKET? I am retro-fitting an aged Contico toolbox that needs a new latch but is no longer being manufactured. I will be installing the BOLT Toolbox Latch Retro Fit Kit BL7022698 and also a Nail Head Striker...
Replacement Strut for Husky Toolbox
I need one 14 1/2inch extended and its 9inch closed?? It has like 5/16 pivot ball it snaps and locks into. 1/4inch or 5/16inch ???? | I may have a solution for you, but the # UWSLIFTCYLIND going to be the longest tool box strut that we have...
Dimensions Of UWS Aluminum Tool Tray UWS060059
It has 2 different sizes posted. UWS Aluminum Tool Tray for Extra-Wide Crossover Style Toolbox Item # UWS060059 Is it 26 1/2 or 24 1/2 | The overall dimensions of the UWS Aluminum Tool Tray # UWS060059 are 26-1/2" Wide, 16" long, and 1-1/2"...
How to Pick Out Replacement Key for UWS Tool Box
I purchased a used UWS toolbox with no keys. All I can determine is that it was made by Daws Manufacturing and the only numbers Ive found are 73011286. Can you help me get keys? | I attached a link to a page that has all of the UWS toolbox keys...
UWS Slim Line Truck Bed Tool Box Handle Position For Using With UWS Side Rail Tool Boxes
What is the distance from the length ends to the handle outside edge? Will the Slim Line Truck Boxes work with the UWS 4foot and 5foot Side Boxes? Can the Slim Line Box be opened from either handle with a side box on both sides of the truck? Thank...
Tool Box and Tonneau Cover Combination that Fits 2022 Ford F-350 Long Bed
I will soon have a 2022 F-350 long bed that want a toolbox and tonneau cover combination. I can't find it on your site but I have seen them at the campgrounds. I will have a B&W 5th wheel hitch in the truck and want to cover it over when not...
Filter Your Search
Contact and Help