Will Curt Hitch Extension # C45048 Work on 1991 GMC K-2500
Hi there, I am wondering if your extension would work for my 1991 GMC 2500K series truck with 454, I’m hauling a camper and a 2horse trailer. Thanks, | As long as you have a 2-1/2 inch hitch receiver on your 1991 GMC 2500 the Curt Hitch Extension...
Which Hitch Fits 1993 Chevy Silverado with Roll Pan Bumper
Have a 93 Silverado with a roll pan , theres hitch cut out in license plate area need a hitch to fit roll pan isnt on yet | For your 1993 Chevy Silverado that has a roll pan rear bumper we have the Curt Class III hitch part # 13942 as a confirmed...
Curt Front Hitch with Iron Cross Bumper & Suspension Upgrades.
My 1997 chevy k1500 has an iron cross bumper with a 3 inch body lift and 6 inch suspension lift. Winch also installed in the bumper. Im looking to get a front receiver mount. Will it be possible to use one with my large front bumper on my truck,...
Troubleshooting Draw-Tite Activator part # 5504 That Functions Only When Manual Switch is Pressed
Yes. I have this part on my 1997 chevy truck and for some reason its not working anymore .when i use my brake pedal it doesnt activate the break lights i have to push the button for it to work and i was wondering why thanks | If your Draw-Tite...
Installation Parts and Rails for Reese 15K Fifth Wheel on a 1994 Chevy 3500 Pickup
i have a reese 15K fifth wheel hitch. have been using this hitch in a 1995 chev. 3500 whick not longer runs. i want to move the hitch to a 1994 chev 3 500 will your rails and kit COde #6008 work on my truck? If so what is the kit number for...
What Hitch for 1976 Chevy Pickup with 8ft. Bed and What Installation Is Involved
Hi: Is this a direct bolt on with no modifications to my truck? Will I have to drill holes in my frame? Will I have to remove the bed to put it on? Will it clear where my spare tire is I have the standard factory spare mounting which is between...
Rear Ramp Door on Pace Enclosed Trailer Does Not Open or Close All the Way with Hinge Springs
Hi, the ramp door on my 1997 paceenclose trailer dont want to come up by the spring I have to left it mostly to get it to closed I tried to a just the spring and once I did that the door did not want to go all the way down after about three...
Replacement Tarp For Extang Tuff Tonno On a 1990 Chevrolet C2500 Long Bed Pickup
Is a part # 13545 the correct part number for: 1990 Chevrolet C2500 Regular cab 8 foot bed? | The Replacement Cover # EX13545 is for a Extang Tuff Tonno Soft Tonneau Cover 14545. This cover is a snapless J-strip, roll up vinyl cover that will...
Class III Hitch That Fits 1989 Chevy Silverado 1500 Standard Cab
I need a class 3 -2inch hitch for my 1989 Chevy 1500 Silverado. Do you have one that fits? Thank you. | Would you be able to tell me if you have a Crew Cab on your Silverado? Also, do you know what kind of bumper you have? Standard, Step, Roll...
Safety Chains and Cargo Tie Downs for 6 x 10-Foot Flat Deck Utility Trailer
What size safety chain is recommended for a 6 x 10 trailer with a single 3500lb. axle? Also, what is the best way to attach the safety chain to the trailer, welding a loop or bolting? Please attached pictures. Thanks in advance. | Thank you...
What are the Wire Functions for Pig Tail Wiring Harness for Optronics LED Tail Light STL23R24B
I have a 1969 Chevy C10 that I custom built a rear bumper for. I installed the STL23R24B lights in the bumper and need to know exactly which wires to connect to which as I am in the process of installing a new and updated wiring harness. There...
B and W Gooseneck Hitch Recommendation for a 1992 GMC Truck
will this fit a 1992 GMC truck | Yes, the B and W Gooseneck # BWGNRK1050 that you referenced has been confirmed to fit your 1992 GMC Full Size Truck. I attached installation instructions for you to check out as well. |
Mounting Bracket for a Dexter Predator DX2 Brake Controller
I have a Dexter Predator DX2 brake controller that I used in my 2002 Ford F-150. It fit in a compartment on the dash so I didnt need the mounting bracket and hardware. Now, I need to install it in my 1994 Chevrolet Silverado and need the mounting...
Step Bar Options for 1976 Chevy C20 Long Bed Pickup
My husband has a 1976 Chevrolet C20 long wheel base pickup. I am interested in getting him the automatic running boards for his truck. Do you have any automatic ones that will fit his truck? Thank you! | Unfortunately, none of our vendors offer...
How Does the Kats Heaters Oil Pan Heating Pad # KH24150 Attach
how does this pad attach to the oil pan? | The backside of the Kat's Heaters Oil Pan Heating Pad # KH24150 that you referenced has an adhesive that will attach it to the oil pan of the vehicle it is used on. Basically you will peel back the...
Brake Controller and Install Recommendation for a 1996 Chevy 1500 Truck
Looking for a brake controller for 1996 Chevrolet 1500 series Cheyenne. | You will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you...
Installing a Brake Controller on 1998 GMC C/K Series Pickup
Is there a wire plug adapter for the 39523 controller for a 1998 GMC 1500? Thanks | To install the Tekonsha PowerTrac Electronic Brake Controller # 39523 on your 1998 GMC C/K Series Pickup, you will want to use a universal wiring pigtail, #...
Bed Extender for a 1996 GMC Pickup Truck
Will this fit my truck? | For a bed extender that will fit your 1996 GMC pickup (but does not have a step) you can use Curt # C57WR Universal Bed Extender. This will give you anohter 26-1/2 inches of bed storage space. |
Trailer Wiring Harness Fit for a 1981 Chevy El Camino
Why cannt use this ? Wires on 81 desconnects rear of gas tank door above frame. | The # 18252 would work for your 1981 Chevy El Camino, you would need to splice the harness into the existing wiring behind the tail light assemblies. I will...
Coupler Lock Recommendation for a Bulldog Cast Coupler # BD4425000317
I want to buy this flat mount hitch BD4425000317 but the reason is because I need a good hitch lock as well. I have the Atwood style and cant seem to get a lock for it. Do you offer a really good lock for the BD4425000317 as well? | I went out...
Recommended RV Water Heater Replacement For A 17" x 13.5" Cutout Hole
I have an older trailer with the dimensions 17inch wide by 13.5inch high. Do you have a unit that would fit that dimension? | We do not have an option that is going to completely fill in the gap but we do carry options that come with doors...
Curt Trailer Hitch Receiver item # 13028 Dimensions
what is the measurment for the mounting holes, my frame rail is 27 inches by 34 inches. curt 13028 clas 3 trailer hitch i was looking at. thanks | I went out to the warehouse and took some measurements for the Curt Trailer Hitch Receiver item...
Will the Pace Edwards JackRabbit Cover with Explorer Rails Fit a 1995 Chevy C/K Series Stepside
Will this fit on a 1995 Chevy stepside | Yes, the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails part # 311-JEC2576 is a confirmed fit for a 1995 Chevrolet C/K Series Stepside Pickup. That said, you will need to drill...
Does the Voyager LED Light Come On without a Trailer Connected
The instructions indicate that the LED should show red when the trailer is not attached. Im assuming this means that initial vehicle installation before hooking up trailer should give me a red LED. But I got nothing....dark. The instructions...
Filter Your Search
Contact and Help