Can Main Body Assembly be Reversed of Curt Universal Trailer Hitch on 2003 Ford Windstar
13900 hitch on my 2003 ford windstar - this hitch mounted ok but seems a bit low. can I turn center bar where receiver hole is up side down to get more height | I took a look at the directions of the universal-fit Curt Trailer Hitch Receiver...
Towing Capacity of a 2000 Ford Windstar and Trailer Hitch and Wiring Recommendations
Towing Capability | Your 2000 Ford Windstar has a gross trailer weight rating of 2,000 pounds unless it has the optional trailer tow package AND 3.8 liter motor. If it has both of those features then it is rated for up to 3,500 pounds. Curt...
Does Camco RV Polyethylene Propane Tank Cover # CAM40532 Allow Access to Tank Gauges
So went is there no sight glass in these covers to session the gauge? Thanks | The Camco RV Polyethylene Propane Tank Cover for (2) 20-lb or 30-lb Steel Tanks - Colonial White # CAM40532 that you referenced has a lid that can flip up to allow...
Replacement Taillight Lens Recommendation for 1986 Fleetwood Southwind
have a taillight cover missing on 1986 fleetwood southwind, but one that comes up in search looks nothing like it horizontal array of three covers 2 red one clear - missing one red - outer driver side do you have such a part? thx | We probabaly...
How Much Ground Clearance On a 2002 Ford Windstar with Curt Trailer Hitch # 13085 Installed
Hi i have questions how much is from the ground tot he top of receiver hitch thanks 2002ford windstar lx hitch receiver part #13085 | I can tell you how to measure to determine how much ground clearance you will have with the Curt hitch #...
Trailer Lights Stopped Working on a Trailer Towed by a 2003 Ford Windstar
The trailer lights worked for some time, but then they quit working all at once. I replaced the fuse, which was blown, but that did not repair the problem. I notice that there is no continuity on the ground white wire from one side of the...
Will Lippert Slide-Out Controller Work To Bypass Factory Slide-Out Wiring
Hello, I have a well cared for Fleetwood Southwind Class A RV Coach with slideout wiring problems. I want to bypass the original wiring in the coach where the problems exist behind the walls and major components and install a controller...
Compatability of Folding Cargo Carriers with the 2002 Ford Windstar
I just purchased the SR9851 along with cargo net from etrailer. Went together just fine and mounted in the hitch OK. However, Will my 2002 Ford Windstar Minivan has enough room to fold the carrier up. | Yes, the distance on the 20x60 Folding...
Parts Needed to Add a 4-Way to 5-Way Trailer Wiring Adapter on a 1996 Ford Windstar
Some help please. I only see the 4 pole wiring connection available for my model vehicle. I will need the 5 pole flat for my 1996 Ford Windstar, as the trailer I am going to pull has back up lights and the 4pole flat connector does not have...
T-Connector Trailer Wiring Harness for a 1998 Ford Windstar
How do you connect a 4 wire connector to a trailer on 1998 Ford Windstar when turn signal is seperate from stoplight? Would you please submit a picture diagram? | Many vehicles like your 1998 Ford Windstar have a 3 wire system with separate...
Mounting Hole Pattern of Flow Max RV Fresh Water Pump
Will this replacement pump bolt up to existing mount | I attached a picture that shows the mounting hole dimensions of the Flow Max RV Fresh Water Pump part # LC689052 that you referenced to compare to what you have now. This mounting pattern...
Hitch and Wiring Recommendation for a 1998 Ford Windstar to Tow a Fleetwood Prowler
Will this hitch in your opinion be safe to haul a 26 foot Fleetwood Prowler for about 40 miles. Mostly flat straight highway. | If the weight of the 26 foot Fleetwood Prowler is less than the towing capacities for the Curt Hitch part # 13085...
Recommended Sway Control For A 2008 Fleetwood Southwind Motorhome On F53 Chassis
Hi I have a 2008 Fleetwood Southwind 32vs on a ford F53. Im trying to figure out what would be the best option to get it to handle better in wind and passing trucks. Its all stock other than a read trac bar we installed. Ive looked at sway...
What Would Cause Trailer Tires Size ST205/75-14 to Wear Out on Insides
My Toy Hauler has 2 3500 lb axels totaling 7000 lbs carry capacity. On the RV sticker it states the the gross weight is 7700 lbs fully loaded of which Im not over. So are my axels able to carry 700 lbs over what they are rated for? Im having...
Replacement Spring Kit for Power Gear Jack on 2003 Fleetwood Southwind 37U
I think this is the right one for my motorhome, but want to make sure before I order anything. My rig is a 2003 Fleetwood Southwind 37U on the Workhorse chassis. | There unfortunately is not a database that tells us which specific parts like...
Manual Step Replacement Recommendation for Kwikee 32 Step On RV
1994 Fleetwood Southwind with 32 series kwikee electric steps. I want to replace with manual pull out steps. My current steps are 24inch wide with 8inch rise/ and with a 18inch high threshold, will the SMFP-2100 be a viable replacement step?...
Wiring Diagram for 7-Pole RV Trailer Connectors For a 1995 Ford Windstar GL Van
I am looking for the wiring diagram for the adapter above. It is on a 1995 ford windstar GL van. I was wondering if u guys had the diagram. Thank You | Yes, we have a wiring diagram for the 7-Pole, RV-Style Trailer Socket, # PK12-707E. I have...
Recommended Platform for Boat Trailer Tongue
I am looking for a boat trailer tongue walk board. | We have a few options for you to consider in a platform for your boat trailer tongue. We don't carry a specific walk board, but we do have some similar items like the following: HitchMate...
Will Curt Multipurpose Ball Mount Properly Tow a Trailer and Carry a Thule 964 Revolver
My question is concerning the Valley Multipurpose Ball Mount V75090. I have a 2003 Ford Winstar with the two package. I need a hitch. Im planning on purchasing a pup-up camper and would like to use a Thule 964 Revolver 4 bike hitch mounted bike...
Installing Trailer Wiring Harness for a 1998 Ford Windstar
I need an electrical schematic to install the wiring into my 1998 Winstar | The wiring harness for your 1998 Ford Windstar is a plug and play harness, part # C55346. It plugs into your tail light assemblies. I have also included a link to the...
Can the RV Refrigerator Roof Vent Cap and Base Be Installed from the Outside?
Does this have to be installed from inside or can it be mounted to roof from outside? | The RV Refrigerator Roof Vent Cap and Base item # DMC37FR needs to be mounted to the roof from the outside. |
Which Trailer Hitch for a 2003 Ford Windstar
I found you on Google. I need a hitch for a 03 Windstar. Which of the 5 do you like the best. I want a 2 receiver. I have always used Draw-Tite but the Curt 13085 has a higher load capacity. | We currently only have hitch available for your...
Trailer Hitch Recommendation for a 2001 Ford Windstar
The video for a 2001 Ford Windstar does not work. Can you email the video. | You might try using a different web browser. Chrome, IE, or Firefox etc. can render videos differently. I attached the video to the right, hopefully it works for...
Recommended Rear Anti-Sway Bar For 2005 Fleetwood Southwind 32V Built On Ford F-53 Chassis
What is the correct roadmaster rear anti sway bar for a 2005 fleetwood southwind 32V on a ford chassis? Thanks | Since your 2005 Fleetwood Southwind 32V is built on the Ford F-53 Chassis and is under 34' long you will need the Roadmaster Rear...
Filter Your Search
Contact and Help