Custom Mounting the RVS-5350 Backup Camera Monitor
I would like to mount the RVS-5350 monitor into a ProClip mounting bracket that is installed along the radio chassis on the front dash, which currently holds my smartphone while I drive. I do not want to use the adhesive attached dash top mounting...
How To Find Correct Braking Assemblies for 1996 Load Rite 21T Trailer
Hi, Trying to replace drums on my 1996 load rite 21T 4200 not sure of proper replacement. Thanks for your help Bruce | The easiest way to find the correct replacement braking assemblies for a trailer will be by using the axle capacity which...
Recommended Hitch Mounted Bike Rack for 2002 Chevy Corvette for Ground Clearance
Hello, I will be ordering the Curt 11034 trailer hitch and want to purchase a bike rack as well. Since the Corvettes sit rather low to the ground, I am concerned about ground clearance issues for the bike rack. Best I can tell, the Swagman...
Replacing Old O2 Sensors When Replacing a Catalytic Converter
IF I CHANGE SENSORS WITH MY NEW ASSEMBLY SHOULD I RUN IT IN WITH THE OLD SENORS TO BURN OFF ANY POSSIBLE OILS THAT PIPE MAY BE COATED WITH THUS AVOIDING SENSOR CONTAIMATION? | I spoke with my contact at Magnaflow and he said it is not going...
Replacement Installation Hardware Kit for Curt Hitch # C11705 for 1992 Chevrolet Corvette
does Curt or you offer the hardware kit separately for this hitch? | Yes, we can help you with replacement installation hardware for your Curt Hitch # C11705. Hitch hardware is single-use only, so if you will be re-installing this hitch it...
Does Hitch for 2006 Chevy Corvette Require Stabilizer Strap
06 Corvette convertible. Regular exhaust. Curt hitch requires a strap when used for bike transport. My reason for a hitch is to eliminate the strap. Do you have something that does not require a support strap or can you tell me why the Curt...
Availability of Exhaust System for 2005 Chevrolet Corvette C6
The standard tips on my C6 look wimpy. I would like to go to 3inch or larger. What do recommend to replace them. Also, what would you recommend for the cat back exhaust system to possible replace the stock mufflers. I recently installed...
Curt Hitch Recommendation for a 2000 Chevy Corvette Convertible with Quad Tip Exhaust
Will this Curt 11034 fit a stock 2000 C5 Corvette Convertible with the stock 4 tip dual exhaust? Your addd says yes, it will fit, but your install video shows a weird single exhaust that i have never seen on a C5. I dont want any problems...
2011 Chevrolet Corvette Receiver Hitch Installation Tips, Instructions and Capacity
1. The install video is confusing and does not discuss how you measure/locate the second mounting hole on each side the one that is virgin as the expanding of the existing frame hole is clear. 2. Every towing capacity chart I find for chevy...
Seasucker Komodo Bike Rack Price Differences Explained
Why are the prices different on the three models listed? \ and the other two are slightly less. Help me understand the differences so that I am better able to make a decision. Thanks for your help. | We have four versions of the SeaSucker...
Does Rear View Safety Backup Camera Mirror Come With Part That Glues to Windshield
I am replacing the windshield in my vette. I would like to know if the piece that glues to the windshield comes with the mirror? Also, will your system work with a different camera? Thanks | The tab on a windshiled that allows for attaching...
Recommended Method to Transport Dog Kennel on 2006 Chevrolet Corvette Convertible
I am going on a trip and need to carry my dogs kennel with me and it will not fit in the car...I would like to know of a suggestion for putting on top of my car....I have a 2006 Corvette Convertible. Any suggestions? | The best solution for...
Determining Function of Wires on Car When Installing New Taillights
I’m installing these Leds lights on my 1974 corvette, they have four wires a red one for brake light, a green one for running light, a yellow one for turn signal and a black wire as ground. How would I wire them to work correctly? I have a...
Trailer Hitch for 2003 Chevy Corvette Towing a Harley Davidson on a Trailer Weighing 900 lbs Total
Should this product be ok to haul lite 150 pound motorcycle trailer and 750 pound H.D. | The Curt trailer hitch # C11034 has a gross trailer weight capacity of 2500 pounds and tongue weight capacity of 250 pounds. The weight of the trailer plus...
Trailer Hitch Receiver and Wiring For a 2001 Chevrolet C5 Corvette
Hi, I have a 2001 base coup corvette I would like know if there is a hitch that will fit curt 11034? I will attach a photo, but I will have the lower rear wing removed before install. Thx | Yes, the Curt Trailer Hitch Receiver # C11034 is a...
Can a Taillight Converter Work with a 2005 Chevy Corvette C6
Part Nr:118158. I am thinking of using this device on my Corvette C6 to be able to separate the blinker from the brake light so i can use european tail lights with separate amber blinker and brake lights. My question is does the amp load go...
Magnaflow Universal Catalytic Converter, Part # MF94309 as Replacement for 1997 Chevy Corvette
I have a 97 corvette with Kooks headers with 3 cross over pipes with high flow metal cats. Will the 94309 series work for a replacement. | The MF94309 converter will work mechanically speaking, but due to the tight clearances of the Corvette...
Would The Curt Trailer Hitch Receiver # C11034 Fit A 2002 Chevy Corvette With Aftermarket Exhaust
Hello, Im looking at purchasing this hitch, however, my Corvette C5 is equipped with an aftermarket exhaust system. Right off the bat I know Ill have to modify the exhaust a bit since theres a plate in between that ties both sets of tips together....
Brackets to Install Keel Rollers Above a Boat Trailers Frame
I am trying to add 10inch rollers to help center a 18foot boat when putting it back on a Yacht Club 1818B bunk trailer. The problem is that the cross members are too low to install the rollers . So, is there an aftermarket plate that can...
Compatible Replacement Bumper For A 1977 Chevy C30
I have 1977 c30 Chevy truck | The The Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel # 71000 is a fit for specific Dodge, Mitsubishi, and Toyota models so it would not be a fit for your 1977 C30 Chevy Truck. Instead you'll need the...
Installation Procedure for Curt Class I Hitch # C11705 in 1991 Chevrolet Corvette
Your unit #C11507 for a 1991 Corvette, does that have a 1inch slide in or a 2inch slide in? Also is there any cutting or grinding required to install or is it a direct bolt-on? Thanks | The Curt Class I Hitch # C11705 that fits your 1991 Chevrolet...
Can Cooler Fittings Point Down on the Cooler of the Derale Oil Cooler # D15603
i have a 67 corvette with a 1970 454 motor and a 4spd trans . the car has headman headers and no a/c the oil cooler kit1506 looks like it will fit . can i mount the cooler with the fittings on the bottom .and do you sell the an braided lines...
Troubleshooting Rattle Sound After Trailer Hitch Install on 2008 Chevy Corvette
It makes horrible rattling sounds. I have a z51 and my installer said it really wasnt made for the car correctly. What do I do now. | The only versions of the 2008 Chevy Corvette the Curt hitch part # C11380 won't fit are the models that have...
Best Battery Charger for Red Top Optima Battery in a 2002 C5 Chevy Corvette
which tenders or float charger is best suited for my red top Optima battery. I drive the car less than 4 - 5 times a month. | The best charger that you can use for the Red Top Optima Battery is the CTEK MULTI US 7002 Universal 12-Volt Battery...
Filter Your Search
Contact and Help