Parts Needed to Add Brakes to 3500-lb Axle on E-Z Loader Trailer
2015 EZ Loader model: EZL96B 17-20 2800. Wheel : ST205/75R14C, 3500LBS axle, This trailer/ axle doesnt have any brakes from the factory. Im interested in your Titan disc brake kits but Im unsure if they will work on a trailer axle that doesnt...
Is a Wiring Harness Included with a Trailer Hitch for a 2011 Hyundai Veracruz
Is the hitch separate from the wiring or do I have to purchase the wiring as well? | Wiring and hitches are sold separately because not everyone uses a hitch for towing. Trailer hitches for the 2011 Hyundai Veracruz such as # 75532 include the...
Recommended Trailer Hitch for a 2011 Hyundai Veracruz
I have a 2011 Hyundai Veracruz. I want to tow a 2300 lb boat. I think the trailer is about 1000 lb. which hitch do you recommend? | The trailer hitch I recommend for a 2011 Hyundai Veracruz is the Draw-Tite Max-Frame Trailer Hitch Receiver part...
Which Roof Mounted Ski and Snowboard Carriers Will Fit a 1998 Chevy Tahoe with Factory Roof Rack
Which Yakima Vertical Mighty Mounts for ski racks will fit the factory cross bars on a 1998 Chevrolet Tahoe. | According to Yakima, with factory crossbars on your 1998 Chevy Tahoe, you need to use Universal MightyMounts for Yakima Ski Mounts,...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Troubleshooting Curt Fuse Blowing When Wiring is Installed on 2010 Hyundai Veracruz
The harness has a 10A fuse in the little red box, my Hyundai Veracruz 2010 also has a 10A fuse in the related circuit, together with right hand rear running light and dash light. The fuse on the vehicle goes off without any trailer attached...
Installing a Brake Controller in a 2002 Holiday Rambler Endeavor
I have a 2002 Holiday Endeavor. I am wondering what wiring harness I would need to install a Brake Controller, and where would I find the plug to plug into on my motorhome. | A brake controller is going to need to be hardwired into your 2002...
Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
Upgrading Tekonsha 4-Way to Tekonsha 7-Way Connection on 2012 Hyundai Veracruz
I already purchased and installed the 118269 T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector along with the 75532 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2. They have worked...
Does Curt Trailer Wiring Kit for 2007 Mitsubishi Endeavor Work with LED Trailer Taillights
I have a 2007 Mitsubishi Endeavor AWD. I purchase a new trailer with LED lights on it. The plug works ok when plugged in to a trailer with regular lights but does not work when plugged in to the new trailer plug that has LED. Does your wiring...
What Size Hole Is Needed For Installation Of Optronics Flush Mount 4 Inch Round Light # STL23R-24B
I would like to install these flush mount tail lights and need to know the diameter of the hole. Will a 4 hole saw provided the needed holes size or does it need to be slightly larger? My application was previously surface mount lights but I...
Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
Would the etrailer Adjustable Trailer Coupler Lock Work w/ the Demco Slide-Lok Trailer Coupler?
etrailer Adjustable Trailer Coupler Latch Lock - 1/2 to 2-1/2 Span - 1/4 Diameter Would this lock work on the coupler below to lock it instead of using the pin provided? Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Black -...
Wiring Harness Blowing Fuses on My 2007 Hyundai Veracruz
My Hyundia has blow three fuses since installing this harness. fuse blowes when nothing is connected to a trailer. Is there a defect in these harnesses as in the one made by Thuel which is being recalled by Hyndia if installed by them. Thanks...
Best Trailer Wiring Harness Option for 2011 Hyundai Veracruz
T-Connector for a 2011 Hyundai veracruz | The Curt T-Connector Vehicle Wiring Harness, part # C56332 would be the correct wiring harness for your 2011 Veracruz. I have included a link to the installation details for you. |
Can Roof Rack Cargo Bag, # HE3021 Be Installed Directly on the Roof of a 2004 Mitsubishi Endeavor
Question about this cargo bag item #HE3021: Does the bag come in different optional colors? Since it has a rubber bottom, can it be placed directly on the SUV roof between the the 2 roof rack bars without causing damages to the car roof?...
Replacement Trailer Tail Light Lens Dimensions
I do not know and can not find a part number on the trailer light. It looks like A16RB from the picture but it would be helpful if some dimensions were included. Jerri | The dimensions to these lenses are as follows: the A16RB is 8-1/16 inch...
Where is the Trailer Wiring Connection Point for a 2007 Mitsubishi Endeavor
I would like to know exactly where the electrical connection is made. I dont see any wires inside the area around the spare tire and there are very few wires with access undr the rear of the vehicle. | The connection point for the Curt Wiring...
Does The Draw-Tite Hitch, # 75532, On The 2010 Hyundai Veracruz Fit Under Or Over The Exhaust
Do you have a picture of this hitch on the vehicle? Does it sit under or over the exhaust? | I called the supplier (Draw-Tite) to see if the Draw-Tite Trailer Hitch, # 75532, will sit under or over the exhaust on the 2010 Hyundai Veracruz....
Recommended Roof Rack for a 2008 Hyundai Veracruz with Factory Side Rails
Will the Sport Rack fit the side rails of a 2008 Hyundai Veracruz? Thanks! | Yes, the Sport Rack Semi-Custom Roof Rack, Raised Side Rails # SR1098 will fit your 2008 Hyundai Veracruz with raised side rails. This roof rack is the most economical...
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
Is There a Curt 1-1/4" Receiver Hitch for 2007 Hyundai Veracruz
can i get the same hitch with a 1 1/4 inch receiver? | While I do have a solution for you, there is not 1-1/4" hitch that will fit your 2007 Hyundai Veracruz. I do, however, still recommend the Curt Trailer Hitch receiver 2" # 13545 for your...
Wiring Harness for a 2007 Mitsubishi Endeavor
I have a 2007 Mitsubishi Endeavor, and I need a wireing harness, what is the difference between a non-powered system and powered system. Will this one work on my car? | Since 07 Endeavors did not come with a tow package, you will need to hardwire...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
Filter Your Search
Contact and Help