!Cherokee Alpha Wolf Travel Trailer  x   >   !x3  x   >   !volkswagen  x   >   Quick Fist  x   >  

I was wondering what the best solution would be and the appropriate method to mount this to my enclosed trailer walls. The walls studs are 16inch apart and the walls are luan backed vinyl. I was thinking of either putting the centre hole through...

The video shows how to secure objects with the mini clamp. How do you open it to release the object? | You would need to pull the handle of the Quick Fist part # QF30050 down and away from the item it is securing so that you can stretch it...

Hi, I am looking at using the Mini Quick Fist clamp on a truck design. The mini quick fist has 5 holes from what I can tell, one in the centre, then 4 on the mounting face. Can you help me out with the following dimensions please? Dimensions...

What are the outside dimensions length and width and hole spacing on the base of this large Quick fist holder? Looking forward to hearing back from you. Thank you so much for your time. | The base on the Quick Fist Super Clamp # QF20020 is...

i am curious as to the closed dimensions of the strap...i am looking for something similar that I can use to lock my kayak paddles on my trailer while traveling. | I have just the product line for you. Take a look at Quick Fist Long Arm Clamps...

I would like to mount these on the underside of my truck tool box lid, to store items that weigh about 15lbs. My question is, once I close the lid will the clamp still hold the item, even if upside down? Thanks | Yes, since the jaws are what...

Could use this for keeping 2inch PVC organized and 1/2inch black iron pipe? | The Side Wall Adjustable Shelf Supports # RA-24 would work much better for PVC pipe organized than it would the black iron pipe. The issue with the pipe is the weight....

I need this part to hold my ladder for wind turbine. Can you please clarify on below points. 1. Load withstand capacity. 2. Life of the product. 3. If you can send the 3D model it will be very helpful to check with my assembly. | The working...

Will these attach easily to Yakima round bars? The outer diameter of the Yakima bars is 1-1/8. Would you need to use the 1-1/2inch and then fill it with 3/8inch of rubber/foam? Im hoping to easily secure a removable ladder for construction...

You have wonderful instructions, video, andc., regarding the installation of your rubber extinguisher restraint, but not ONE WORD about how one releases the strap. Does one simply pull outward on the strap to release? It really would be good...

I purchased some quick fix clamps and they are to large do you have smaller clamps | The Quick Fist Clamps are offered in a few different sizes and configurations. The Quick Fist Mini Clamps part # QF30050 for example fits 5/8" - 1-3/8" diameter...

I am looking for a replacement fire extinguisher holder for my 2018 Tab 400... The extinguisher on this 400 mounts on the inside of the door for the Kidde model M5G which I presume is a 5lb extinguisher Thanks | For your application I recommend...

If clamped down tight to a pole and not bolted onto something, would the clamp part be likely to twist around te pole?? | If you clamped something pretty tight with the Quick Fist Mini Clamps # QF30050 that you referenced you would not be able...

Will this work to vertically hold brooms or mops or are the better suited to hold one tool with two clamps, horizontally? | You could pretty easily hold brooms or mops vertically with the Quick Fist Mini Clamps # QF30050 that you referenced....

How wide is the bottom part... the side that mounts against the wall?? | The side of the Quick Fist Tie Down Strap # QF10010 that mounts to the trailer wall measures 2-1/2" x 3/4". |

Is the base metal or plastic? And would rivets hold it in place?? | The Quick Fist Tie Down Strap # QF10010 that you referenced is made of transportation grade rubber and has a metal spacer that the bolt slides through so it mounts securely. |

How easy are these to unlatch? The photos all show tools held horizontally....do they hold things vertically as well?? | The Quick Fist Original Clamps # QF10010 that you referenced are easy to latch and unlatch but also hold the items very...

can they be attached to Yakima bars? | Yes, since the Yakima crossbars are 1-1/8 inch in diameter and the bar width range of the Quick Fist part # QF10010 is 1 inch to 2-1/4 inch this will fit on a Yakima crossbar. |

Will these hold an axe handle?? | As long as the axe handle is between 1 and 2-1/4 inches in diameter the Quick Fist Original Clamps # QF10010 that you referenced are going to fit and work well. |

I need a trailer hitch for a 2018 Ford Edge, will this fit and work well? | Yes, the Draw Tite hitch part # 75234 that you referenced fits the 2018 Ford Edge SE/SEL, Sport, and Titanium models so this would fit and work well for you. |

Would these work for attaching a bird feeder to a railing? To keep squirrels from knocking it off... | As long as the bird feeder is on a pole that is between 1 inch and 2-1/4 inch in diameter the Quick Fist Clamp part # QF10010 will fit and...

How do I attach this without using a screw or bolt system?? | To install the Quick Fist Original Clamps # QF10010 you have to run a bolt through the center of the clamp to the wall you want to attach it to like what is shown in the install video...

Hello, I saw an item on your website with Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding Item RR43196. The picture was submitted by Don B. It has the Rhino-Rack mount in the back. I was wondering...

The metal propane strap in one of our Solitude 5th wheel propane compartments has broken off at the point of mounting. Can these straps be used as a replacement to the standard metal straps used in an RV? The compartments hold 30lb tanks....