Mounting Hole Spacing for Paneloc Slam Latch
What is the spacing for the mount holes? | The mounting holes for the Paneloc Slam Latch # F709-104Z are spaced 1-7/8" apart horizontally and 1-3/8" apart vertically. Those measurements are taken center hole to center hole at you can see in...
Stainless Steel Version of the Paneloc Heavy Duty Spring Latch
Hi, Do you have this Item # F720-182Z105 in stainless steel. | Yes we do. We have the # F720-282U108 which is the exact same latch as what you referenced except in stainless steel. |
Is Paneloc Slam Latch with Cover Available with Keeper
Is this item available with a keeper latch receiver? | The Paneloc Slam Latch with Cover # F709-204P011 that you referenced is not available with a keeper and we don't have one that will work with it. We do have hook and keeper assemblies like...
Replacement RV Storage Compartment Door and Entry Door Locks
I have a 2016 StarCraft Launch ultra lite. I need to re place the 2 storage compartment latches. The locks do not lock. They keyed the same as the entry door. Entry door locked come fine. Having trouble finding the correct latch on your web...
Availability of Slam Latches for Trailer Doors
I want to replace the entire RV doors on my unit. I want to use the Slam latch doors but need to know where I can get them and if they can be made to a certain size. Im on vacation so I will monitor my emails. Just point me in the right direction....
Spring Loaded Trailer Ramp Latch that is 2 inches Long Availability
Im looking for a spring-loaded bolt that holds ramp in place. About 2 inches long. Threaded with a center rod that spring-loaded | Sounds like you are looking for the Spring Latch w/ Holdback for Trailer Tailgate # F719-172Z105 which is a 2...
Maximum Throw/Pin Extension for Spring Latch
do you have this latch with the same diameter pin, but longer more throw? | I would love to help but we do not offer the Paneloc Heavy Duty Spring Latch part # F719-172Z105 for left hand or part # F719-182Z104 for right hand with a pin extension...
Recommended Right Hand Paneloc Heavy Duty Spring Latch
DOES THIS LATCH ALSO COME IN A RIGHT HAND VERSION? IM ASSUMING IT IS ALL THE SAME PARTS, JUST ASSEMBLED IN A RIGHT HAND ARRANGEMENT. | For a right hand version of the Paneloc Heavy Duty Spring Latch # F720-282U108 referenced in your question,...
Parts Needed to Add a Storage Hatch on Enclosed Trailer
in the Brophy D-Ring Tie Down Anchor w Backing Plate video at 5 seconds in, what is what looks like hatch cut ou in the floor of the enclose trailer. | It's exactly what you said, a hatch in the floor for some extra storage. Probably for ratchet...
Can Spring Latch F784-102Z Be Used On Both Left and Right Side of Trailer?
F784-102Z Is there a left and right option? Thank you! | Nope. The Spring Latch # F784-102Z you were looking at is not designed for either side, you just rotate it one way for being on the right side, and flip it 180 degrees to use it on the...
Can the Lock Side-Door Bar Lock Assembly Be Used On Double Doors
Will this hold double doors together ? | Yes, the Lock Side-Door Bar Lock Assembly part # 305736 can be used to hold a set of double doors together. That said, you may also want to add some keepers on the top or bottom like part # F719-182Z104...
Paneloc Slam Latch with Cover Come With a Keeper?
Paneloc Slam Latch with Cover - 1-1/2inch Long x 1-1/4inch Wide - Stainless Steel Item # F707-204P011 Please advise if this Slam Latch with cover comes with a keeper. | The Paneloc Slam Latch # F707-204P011 does not come with a keeper; it would...
Recommended Spring Latch for Snowbear Trailer Gate
I have a 6x10 snowbear trailer. I need a gate latch pin. Do you carry one for this trailer? | We have a large selection of spring door latches available, such as the excellent Penloc Heavy Duty Spring Latch # F720-282U108. This spring features...
Do you carry a mini 5 overall spring latch that has an aluminum housing and stainless steel bolt. We are building a side x side flatbed and need smaller versions | The closest thing we have to what you're looking for is the Paneloc Spring Latch...
Stainless Steel Heavy Duty Spring Latch with 3/8" Diameter Pin
I need a L and R hand all stainless latch small, 1/4inch to 3/8 bolt | We have exactly what you are looking for with 2 different styles. The Paneloc 2" long x 1-1/8" wide Heavy Duty Spring Latch Left Hand # F719-282U and Right Hand # F719-272U...
Replacement Ramp Hinge Needed for Toyhauler Ramp Repair
Looking for a bolt on ramp hinge to to repair my ramp on toyhauler. Exterior hinge that bolts on. Not a zipper style hinge. Thanks | I believe that you are looking for something like the Paneloc Butt Hinge # H418-204U. This has a stainless...
Replacement Trailer Ramp Retaining Pins
I have an old trailer that has two lost pins on each side. Never let your brother in law borrow your trailer... They were 1/2 inch by about 4 inches. There was a retaining clip that held them onto the arms and the pins went into the trailer...
Smaller Sized Trailer Spring Latch
What is your smallest spring latch? I dont need one so much to secure my front and back gate as much as to just keep it from bouncing loose in the corner brackets. | The smallest spring latch we have is the Paneloc Heavy Duty Spring Latch #...
Left Hand Version of the Paneloc Heavy Duty Spring Latch 2 Inch Long x 1-1/8 Inch Wide
Does this latch have a left hand version? I need both. | Yes, the Paneloc Heavy Duty Spring Latch is offered in both right hand part # F719-272U and left hand part # F719-282U. The brackets are 2" long x 1-1/8" wide, have a 3/8" diameter pin,...
Replacement Spring Latch for Left Side of Trailer Tailgate For 2 x 2 Space
I just bought a 2002 snow bear utility trailer and it is missing the left side spring loaded hitch pin. This trailer has a 2 x2 metal housing attached to the tail gate. Is there a replacement hitch pin i can buy? Thanks | There is an option...
Replacement Latching Pin for Trailer Tailgate that Measures 5-3/4 inches
Hello, I am having a difficult time trying to find the correct latching pin for a trailer tailgate. The overall dimensions is 5-3/4 long. The pin extension is 2-3/16. The existing bracket is approx 2-3/4 long. The bolt seems to be approximately...
Using Paneloc Slam Latch for Work Truck Drawers
I am wondering if I can use this latch to hold drawers closed in my work van. The latch would be mounted on the front of the drawer with the pin going sideways into the side of the cabinet. I would like to know if you have a strike plate I can...
Solution to Allow Trailer Ramp Door to Lock From Inside Toy Hauler
Heyo I have an enclosed trailer woth ramp door. Im trying to add more security and would like to figure out a way to latch the ramp door closed from the inside. I found some heavy duty Hasps. That may work. Is there a product made for that....
Can't Remove Broken Key fro Thule Cargo Box. What Now?
Can I replace the entire lock system for my Thule cargo box? I tried dental picks, drilling, everything. Nothing is working. | Thule unfortunately doesn't offer the cylinder or sleeve the lock core sits in as a replacement part. If the cylinder...
Filter Your Search
Contact and Help