!Cherokee Alpha Wolf Travel Trailer  x   >   !Park Lane  x   >   !1006  x   >   Gen-Y Hitch  x   >  

Hi, just wondering what the part number is for a Gen-Y Executive Gooseball 5th wheel automatic latch hitch that will fit a Brinkley Z3100 RV pulled by a 2020 RAM 3500 Diesel truck? tx! | Hey Mark, since we know your Brinkley Z3100 has the Rhino...

What locks do I use for this? | To lock everything up on the Gen-Y Phantom X Adjustable 2-Ball Mount # GY45XR I recommend the InfiniteRule Lock Set # 34061672-D which come all keyed alike, are made in the USA, and boast an impressive shear strength...

I recently purchased a Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 18,000 lbs - 3.5K TW Item # 325-GH-8040. I could not find the pin box sticker so I order off of measurements. I started to pull the old pin box...

I have a 2021 east to west tandara 385 mb camper. It has a rhino box 5th wheel and I would like to convert it to a gooseneck. I will be pulling it with a 2018 Ford F-250 super duty with the 6.7 turbo diesel. Which gooseneck hitch will work with...

At the top of the page, it shows 21K capacity but under the Specs, it shows 12K. Which is it? Thanks! | The Gen-Y Phantom Adjustable 2-Ball Mount w/ Stacked Receivers # GY48XR is rated for 12,000lbs in capacity. The 21,000 in the item description...

Good morning, can this be used in both the rise and position, or is it just for only? | Yes, The Gen-Y Phantom Adjustable 2-Ball Mount can be used in either the rise or drop position. It has a 6 inch rise or has a 6 inch drop. The mount...

I have a question about your ramp Item # 288-07503. Do you sell a channel that can be bolted onto a trailer or storage shed that is about 20 inches high from ground that will enable these ramps to be positioned back and forth to fit the width...

Will this lock work with the Reese Goosebox 18,000 lb? | I have a solution for you, but the Gen-Y Auto Latch Gooseneck Coupler Lock - 25,000 lbs # 325-GH-7111 does not look to be a fit for the Reese Goosebox 18k. The Gen-Y Lock requires a lip,...

I have a 2017 Ford F-250 and I pull a 2012 jayco white hawk camper. The tongue weight of the camper is 750 or so lbs. In the write up about this hitch it says a minimum of 1200 lbs of tongue weight is needed to get the shock absorbing aspect...

I have a 2019 Chevy 3500 Dually with a Curt EZr Double Lock Underbed Gooseneck Trailer Hitch. What do I need to get to be able to pull a 5th wheel trailer that has a dry weight of 16,620 lbs and a GVWR of 20,000? | To tow your 5th wheel with...

Can I use the new BandW Continuum with the Gen Y Boss GH-1125? | Yes, you can. The B&W Continuum Weight Distribution System item # BW78FR will work with the Gen-Y Torsion 2-Ball Mount item # 325-GH-1125. The Continuum has a tongue weight range...

Will this goose ball adapter work with the Reese Goosebox on a Ford F-350 Crew Cab with 6 3/4’ bed? Will any warranties be voided if using this? | Yes, the Gen-Y offset ball adapter part # GY43XR that fits the Ford puck system of your truck...

will this hitch fit a 2014 Bighorn Heartland | You will want to verify the pin box on your 2014 Heartland Bighorn as well as the tongue weight on your pin box. Based on information from others I see the 1621 pin box is the most commonly used...

I have a 79 f150 with an old school chrome deep bumper. It is a 10” , would you guys have a hitch that would work on the truck? Doesn’t need to be able to haul an insane amount since it’s a half ton truck with a 9in lift and 38s. | The Curt...

Is extension threaded so I can use Thule locking antirattle pin lock | The Trailer Hitch Extender for 2" Hitch Receivers - 8" Long # e88YR is not threaded. Therefore, you can use your threaded locking hitch pin on the bike rack side but you'll...

Will this work? Hello, Technically I need a 3 inch ball mount, but want to know if I will run into any problems using this ball mount since its only a 2 inch . None of the multi-use hitches come with a 3 inch . D210 Thanks! | The Curt Multipurpose...

I have Class B RV built on the 2018 Promaster 2500 and want to carry my small motorcycle on the back using a hitch carrier. My concern is that the 2500 has relatively low ground clearance to begin with, and by the time you hang a motorcycle...

Will this pin work with the Gen-Y Rebel Ball Mount w/ Stacked Receivers? | For your Gen-Y Rebel Ball Mount, you'll want to use either the Gen-Y Hitch Pin and Clip for 2" Hitches # 325-GH-096 or the Fastway Trailer Hitch Receiver Lock # FA86-00-3160....

I am looking for a dual hitch adapter like item # RM-077-6 to carry 4 bikes on a rack, however my current tounge weight is 435 pounds. Do you have any alternative items that have a higher tounge weight? | I do have an option for you but the...

Do you sell the 10,000 lb Verizon of this hitch? I dont see it on your website | The Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot...

Using this adapter, would say for an example would the equalizer hitch head hit the gen y receivers say when using 8 washers ? Looking @ pictures it looks like their isn`t enough room to angle the head back that far . My current set up I`m...

I want to buy 325-GH-8045 hitch. Does ETrailer sell the 1/4inch filler shims that are required to mount this hitch to a Lippert 1116 pin box, which is 12.5inch wide ID? | The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box...

I have a 2022 Forest River Rockwood Ultra Light 2892RB with a Curt Turning Point pin box. Is the Reese 16K Goosebox adaptable to this camper? | The Lippert/Curt Turning Point pin box uses a unique bolt pattern of which we only carry the Gen-Y...

Is this Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box the correct one for my 2023 Heartland BigHorn 3970RL? | The pin box on your 2023 Heartland BigHorn 3970RL is a Lippert 1621. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck...