How Many Turns Does it Take to Raise Dutton-Lainson Drop Leg Jack- 2,000 lbs 1 Inch
How many crank-revolutions per inch to raise or lower? Thanks in advance. | I spoke to Dutton-Lainson about the Drop Leg Trailer Jack with Footplate - 2,000 lbs part # DL97MR and they informed me that it will take 8 cranks of the handle to raise...
Recommended 1,200 - 1,500 lb Side Mount Boat Trailer Jack Made in USA
Could you tell me which 1200 to 1500 lbs jacks are made in the USA? | The only side mount trailer frame jacks made in the USA we currently offer are from Dutton-Lainson such as the Pull Pin, Easy Swivel Trailer Jack part # DL22580 which has...
What Size Snap Ring Does the Pull Pin, Easy Swivel Trailer Jack with Foot Use
Whats the diameter of the snap ring? Im looking for one that has a 2.5 diameter | The Pull Pin, Easy Swivel Trailer Jack with Foot part # DL22683 is designed for a 2-1/2" diameter snap ring mount like what you said you had which is actually...
Electric Winch For Kar Kaddy SS Tow Dolly
Do you have an electric winch that works with the kar Kaddy ss? | The manual winch for the Kar Kaddy is a 15' nylon webbing strap with 1400 pounds capacity. A comparable electric model is the Dutton-Lainson # DL25200 Electric Winch with 1500...
Recommended Safety Chain Cables For A 2022 Ford F-250 With A BW Hitch
Can you tell me if the safety hooks will fit on a BW Hitch for a 2022 F-250? Is this unlike the Chevy 3500 problem that you responded to previously where the safety hook throat is too shallow? thanks | When it comes to using safety chains...
Recommended Trailer Winch Compatible With 2 Inch by 20 Foot Winch Strap with Hook
Would you recommend a 2inch or 3inch winch strap for a Fulton K2550 winch on a boat trailer? | The Fulton High-Performance Brake Winch - Cable Only - 2,500 lbs # F143201 is the replacement for the K2550 you mentioned, so I can't recommend either...
Pipe Mount Inner Diameter Measurement Compatibility with Trailer Jack
Hi, Im looking at part DL22670 and was looking for the inside dimension, I need a piece to weld on the frame to hold my current pipe mount but the piece I need is 1 3/4 ID, outside dimension is flexable but need that ID. Could use a piece of...
What is the Mounting Tube Size of the Removable Steel Foot for DL22530 A-Frame Jack # DL22541
What are dimension specifications? Inside diameter of mounting tube? Foot length and width? | The mounting tube dimensions for the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson, item # DL22541, are 1-3/4...
Will the Hex Shaft # DL406102 work on a Worm Gear Hand Winch # DL11002
Is this strap winch available with a HEX shaft P/N406102? Id like to use it with a 1/2inch drill to raise my dock for the winter. | The Hex Shaft for Dutton-Lainson Worm Gear Winches # DL406102 that you referenced is designed to fit Dutton-Lainson...
Recommended 2-Speed Hand Winch for 2900 lb Boat
I have an 18 foot boat with a combined weight of 2,900 pounds. My trailer is equipped with rollers. Im interested in a 2-speed winch, what size would you recommend? Thanks | Typically, if the trailer has bunk rollers, you can choose a winch...
Availability of Ratcheting Brake Winch
Would it be possible to put a rachet in place or in addition to the brake on the winch #PSKR15000301 . For instance could I install a rachedt repair kit similar to Item # F501117. I ask because my winch brake broke and would like to either...
Best Replacement for a Shelby Hand Winch 5405
Hello, I need to replace an old Shelby winch. Do you carry any that would be similar in size and have matching mounting holes? Thank you | The Dutton-Lainson Hand Winch part # DL15303 is the replacement that I recommend for your Shelby Hand...
Retracted and Extended Height of Dutton Lainson Trailer Jack DL22530
What is the retracted length of this jack? | The retracted height of the Dutton Lainson Trailer Jack # DL22530 is 8-1/4 inches and the extended height is 23-1/4 inch. From the mounting bracket to the top of the jack measures 15-1/4 inches. |
Replacement Winch Strap for Pontoon Boat Trailer
I am replacing the winch strap for my 18.6 ft Apex pontoon boat trailer. The one I removed was 12foot x 2inch with the safety strap. This strap shows for PWC but can I use on my Roadmaster pontoon trailer winch. Again this is an Apex Quest...
Replacement 2 inch Wide and 20 Foot Long Winch Strap Used with 4000 lb Boat
I need new 2” x 20’ boat winch strap. Boat/motor is 1850 lbs, 2100 with full tank gas. What strap do I need? What is correct strength rating? | We have the Dutton Lainson winch strap part # DL24242 which is 20 feet long, 2 inches wide...
Electric Boat Winch to Use with 5,000 lb Boat
I have Powerwinch # RC30 want to replace with Fulton strap unit Boat weight 5000 I have a powerwinch model RC30 I want to replace wirh Fulton strap type Boat weight 5000# 3 | The Dutton Lainson Strongarm winch part # DL25215 would be...
Mountng Hole Width, Center to Center, on Channel Tongue Trailer Coupler DL13800
What is spacing of mounting holes from center to center? Also, the max capacity of my trailer is 2,900 Lbs. is there any advantage to purchasing a 5000 or 6000 lb.coupler over this 3.500 lb. model? | The mounting holes, center to center, on...
Can Remote be Added to Dutton-Lainson TW4000 StrongArm Electric Winch DL25200
Adding remote to a dl25200. I often fish alone and need a remote so I can hold my 16 foot boat in position for staying centered on the rollers. Thank you. | There is indeed a remote available for you to add to your Dutton-Lainson TW4000 StrongArm...
Winch Strap Compatible With Dutton-Lainson Hand Winch # DL14627
DL14627 lists a 38foot strap capacity, but know from experience the 25foot Boat Buckle strap is substantially thicker than most 2inch straps. If not, can you suggest another 1,600-2,000# winch model with the capacity for this strap? | You are...
Recommended Roller Bunks for 14 ft Alumicraft Trailer
Hi / i am replacing bunk rollers on a boat trailer which has a older alumicraft 14 ft boat on it / boat loaded crooked and popped a bunch of the rollers off of it with mongrel size rollers i cant find thus a new replacement. while checking...
Recommended Parts to Use on Boat Trailer for 1957 Wooden Hulled Sedan Convertible Boat
I am working with a 1957 wooden hulled sedan convertible boat which weighs about 1400 lbs. What type of keel rollers, bunk rollers or bunk boards do you suggest for outfitting an existing trailer for a wooden hull? | For the best boat trailer...
What Is The Collar Inside Measurement Of The DL22414 Trailer jack Wheel?
Does the collar on this wheel have an inside diameter measurement of 1.75 inches? I need this for my travel trailer that has a replacement power tongue jack tube. The old tube was 2inch so the original wheel is too big. | The Removable Wheel...
Picking Out Winch for 3,100 lb Boat on Trailer with Wood Bunks
1,500lb winch and a dry boat weight of 3000, for loading and hauling onto a trailer with bunk boards. Currently the boat doesnt seem to move that well on the bunks. Is this strap sufficient? | With wooden bunks on a boat trailer the ratio...
Available Replacement Parts for JIF Marine 3200-lb Hand Winch
Can I get replacement parts for the Jif 3200lb hand winch. | The only replacement part available for the Jif 2-Speed Boat Trailer Winch # 315-W3200D is the Hand Winch Strap with Safety Hook # DL24242. |
Filter Your Search
Contact and Help