!Cherokee Alpha Wolf Travel Trailer  x   >   !Impala  x   >   !Genesis  x   >   GCH Automotive  x   >  

Can you tell me how to adjust the camera on my #346001? | The camera on part # 3460010 is a ball within a socket. So all you have to do it move the camera with your fingers to align it properly. It will be a little tight so it doesn't move while...

will camera FOS43TASF work on a 2019 Montana 3121rl 5th wheel , or is there one that might have 2 cameras ,one for back of camper and one you can put in bed while hooking up to trailer. I have a goose neck hitch? | The Furrion RV Observation...

For the camera to work, using the supplied switch, do you have to have both the switch and the red power wire on the small pigtail connected to a 12v power supply? Instructions read like it’s one or the other. Truck Bed Cargo Camera for 8inch...

I have a small tool box in the bed of my truck. Would I be able to see the gooseneck ball over the box or the toolbox block it? | The Truck Bed Cargo Camera for Factory Monitor - 3rd Brake Light - Switch Kit # 3460015 will give you 150 degree...

Can it get 3 way toggle switch or wire in two toggle switches for three cameras. My Keystone Cougar 5th wheel is pre wired for a camera. It would be great if you have a 3 way switch I can use switch using my 8” factory monitor | That would...

Hello, I installed the 3rd brake light camera as instructions say and watched the video numerous times. I am getting a blue screen at times and sometimes a black screen and after a few second a pop window comes up saying camera not supported,...

I plan to use a factory accessory switch do you have a package without the switch? i have a few questions 1. do you have a package that doesnt include the switch i plan to use a factory installed switch? 2. How do you seal around the third light...

will this 3 light system work with the console monitor in my 2018 ram 2500 4x4 | Yes, the Truck Bed Cargo Camera for Factory Monitor - 3rd Brake Light # 3460015 that you referenced is confirmed as a fit for your 2018 Ram 2500 that has the console...

Can you use the existing switches in the truck in stead of the the one that comes with the camera | The Custom Third Brake Light Camera for 4.2" Factory Monitor part # 3460002 which is a fit for a 2018 Ford F-350 Super Duty has its own built-in...

Can you guys make an override switch for the back up camera. This would be a good seller so someone could activate the tailgate camera at any time too. Or add the toggle mode to this kit where you can activate the tail gate camera when ever...

Just bought this and need to adjust the camera. How do you adjust the camera? | If you look at the camera that is integrated into the rear taillight assembly of the # 3460015 you'll see small holes or indentations. What you want to do is take...

Hello, I have a 2018 with a back up camera. I would like a cargo camera. In my menu of the radio, it has a bed camera function in the display. Is it possible if I purchase the kit for my truck, that this option could control the bed camera?...

I purchased this unit a couple weeks ago, and installed it today. After getting everything connected I turned the truck on to check it out but my monitor doesn’t even come on. I’m not sure if the T harness is bad or what. as soon as I have time...

Will this fit a 2022 Silverado 2500 HD with a 7” factory screen? | The Custom Third Brake Light Camera for 7" Factory Monitor # 3460011 you mention will not fit a 2022 Chevrolet Silverado 2500, this product is designed to work with the 2015-2019...

I have a 2020 F2 50 lariat will this be a plug and play so I can use it on my monitor and not have to add an additional screen or switch it’ll pop up on my sink just like my tailgate camera? | If your vehicle has an aftermarket monitor, or if...

Forest River/2019 F250 with 360 camera Is there a backup camera that would work on our prewired 2018 Forest River RV that would connect to our 360 Camera in our 2019 truck or will I have to buy a backup camera with its own screen. Have asked...

I stumbled across this bed camera in search of a dash cam with front and rear cameras for my 2020 F150 XLT with 8in screen. I would like to do what connection there is for the camera itself. I understand there is a switch to hookup to factory...

Help how do i know if i have 8 inch monitor. My screen is 4inch high by 7 inch wide. It is about 8 inch from corner to corner. How hard to find connection space. I am a 67 year old man. How long does it take to complete. | The correct way...

Okay, you claim this camera can be used on the F250 monitors Togo switch , well Ford do not have that option for the F150 but I do have the tailgate camera for back up assist, how does this work with my factory F150 monitor? | The Custom Third...

Will this plug into the factory plug of a 2017 Ram 3500? Im removing my tailgate with factory camera so I need something for backing up to a trailer. | I have a really great backup camera solution for your 2017 Ram 3500 with the GCH part # 3460015...

Im looking at a truck bed camera for my 2018 GMC 3500. The options for 7 or 8 screen I assume are diagonal measurement? My screen is 7 across and 8 diagonal. Which cam set up is recommended? | Yes, the factory monitor is measured diagonally...

Cargo camera # 3460001 works with Synch 3 8inch screen. What about the newer 12inch screen on 2022 Superduty Lariats and higher trims Synch 4. | The Custom Third Brake Light Camera System w/ Rear View Mirror # 3460005 is currently your only...

I have a 2018 F-250 with the back up camera. After watching the install video I was wanting to know if you could use the factory installed pass through wires located on the passenger side kick panel rather than going through the grommet on...

I ordered a cargo camera to fit 2011 Ford F250 with 8inch monitor. However, I do not have a 8inch monitor. My mistake. Do you have a system that will work with 2011 Ford F250 super duty with the Sync navigation system and monitor that measures...