Correct Wiring Harness Bracket to Install 4-Pole on 2020 Chevy Traverse
Considering ordering a Curt CU29FR, with a T-One Harness #118761. What is the recommended wiring harness bracket? going onto a 2020 Chevy Traverse LS? | The Curt Class III hitch, part # CU29FR and the Tekonsha # 118761 are both excellent choices....
Weight of Draw-Tite Class III 75673 Trailer Hitch for 2013 Subaru Outback Wagon
How much does the Draw-Tite 75673 Class III hitch for a 2013 Subaru Outback weigh? | Minus packaging, the Draw-Tite # 75673 Class III trailer hitch weighs about 32 lbs, and is a confirmed fit for your 2013 Subaru Outback Wagon. You might consider...
Wiring Harness and Hitch Recommendation for 2016 Mazda CX-9
I have a 2016 Mazda CX9 FWD Touring. As far as i know, there is no OEM Tow Package. Im confused by the statement in all your wiring harness options that states the T Connect easily taps into the OEM Towing Package. Please advise as to exactly...
How to Install Trailer Connector on a 2010 Ford Escape with Tow Package
we look under my 2110 ford escape for plug location but didnt see the protective cap. is it below the brake light on the driver side. do i have take off the brake light. | You will not need to remove the brake light. Underneath the Escape,...
Will the Curt T-Connector Trailer Wiring Harness Work on a 2010 Acura MDX
Is this wiring harness compatible with the vehicle, hows it mounted on the trailer or loose?? any addl info on this product is appreciated. Thxs | The Curt T-Connector, item # C56038, is compatible with your 2010 Acura MDX. The harness plugs...
Converting 4-Pole Flat Connector on Honda Odyssey to 6-Way Square Connector on Pop-Up Camper
I have purchased a 1999 Dutchman Pop up camper. It has a 6 way plug on the camper side and I have a 4 way plug on the Honda Odyssy. Will this part work on this camper like the jayco or are they different. Do you have an adapter? | The adapter...
Wiring And Adjusting The Tekonsha Voyager Brake Controller, # 39510, On A 1999 Ford F250/F350
wiring schematic and adjustment of tekonsha voyager | I am sending a link to the instructions for the Tekonsha Voyager Brake Controller, # 39510. It will show you how to adjust the brake controller. They do not have a wiring schematic, but I...
Using a 2 Inch Trailer Hitch Adapter Reduces Tongue Weight Capacity on a 2002 Mercury Mountaineer
2002 Mercury Mountaineer with a factory 1 1/4 hitch. Can a I safety place an extension adapter to convert to 2 inch and tow a car dolly with a vehicle of approxiately 3000 pounds? Rear wheels of towed vehicle will be rolling. Tongue capacity...
What Class III Hitch Will Fit A 2005 Hyundai Santa Fe And What Hardware And Wiring Is Needed
need to know what I need for class III hitch and all necessary hardware.inc wiring harness.. | For a 2005 Hyundai Santa Fe you will need the Hidden Hitch Trailer Hitch, # 87419. It is a Class III hitch and has a gross towing weight of 3,500...
2-Inch Hitch Ball Recommendation for Use With Hidden Hitch Ball Mount D-28
Im getting this ball mount and need a 2inch ball with, Im assuming, a 1inch diameter shank. Do I need a long shank? Thanks. | You will need to select a 2-inch hitch ball with a 1-inch diameter medium-length shank for use with Hidden Hitch Ball...
Converting 2009 Toyota Tacoma Factory 4-Way Connector to a 5-Way Connector
My 2009 Tacoma came with factory installed 4 pole flat. The trailer has a 5 pin flat fith wire to allow trailer to be backed up / connected to backup lights on vehicle Am really having trouble finding such a vehicle side plug. | The easiest...
Availability of a Trailer Wiring Harness for a 2010 Honda Pilot
I own a 2010 honda pilot. Under the drivers side rear bumper there is a wiring harness with what looks like a connection to plug in trailer wires. On the bumper next to the 2 trailer hitch is a plastic punch out on the bumper. Will one end of...
How Tall is 2 Inch Diameter Hitch Ball Part # 19247
I would like to know what the height of the ball. My receiver top inside edge is 19 from the ground on the vehicle. I need to have the top of the ball 16.5 from the ground for the trailer. I need the height of the ball in order to calculate...
Solution for LED Boat Trailer Lights Hyperflashing With 2008 BMW X5
2008 BMW X5. My boat trailer was rewired with LED lights. I now have a hyperflash issue. I believe the answer is to install one ALEDRST2B on each new LED trailer light, agreed? Challenge is the boat trailer gets submerged every time I put...
How To Convert a 4-Way On a Motorhome to a 7-Blade
I have a 1999 Lazy Daze with a 4-pin receptacle on the back of it to connect my tow vehicle. I have a Brake Buddy so I dont need to connect a trailer brake. Im towing a 2012 Honda CRV with a 7-pin connector. Is there an adapter to go from the...
Trailer Hitch and Towing Accessories Recommendation for 2015 Nissan Murano
You offer 2 hitches for my 2015 Nissan Murano..how do I pick the best built hitch...they all look the same, install the same, so how do I choose??? Your help would be greatly appreciated. Thanks | The Draw-Tite # 75952 hitch is manufactured...
Recommended Wiring Converter for Separated to Combined Circuits and Combined to Separate
old vw ,hooking up to mustang tail lights 1157 bulb.. separate brake ,left turn , right turn, tail ... coming out left turn,right turn ,tail ..out brake is combo with turns... no leds .. | It sounds like you need to combine separate brake...
Installation Hardware and Wiring for a 2009 Toyota Sienna Hitch Installation
Are the bolts stainless steel or hardened. One fellow said the bolts were to big for the holes in the Toyota. Was this a one time problem, if not has it been corrected? The only wiring Ill need is for the car. The boat is wired, What wiring...
Trailer Wiring Harness Installation For a 1995 Chevrolet S-10 Pickup
I am trying to put a wiring harness on my s10, It has a wiring harness already ,but is needs the end for a trailer hookup. But Iam not sure what to order? | If you have the bare wires that are connected to the vehicle lighting circuits, but...
Adding a 4-Pole connector at the Rear of a 2010 Ford F-150
I am looking for a custom adapter to add an extra 4 pin plug to the harness of an 2010 F-150 FX4 w/trailer tow package. It has the 7 pin plug and 4 pin plug at the hitch. | You could add an extra 4-Pole connector at the rear of your 2010 ford...
Recommended Trailer Wiring Harness for 2001 Dodge Dakota
Looking for a trailer wiring harness for a 2001 dodge dakota saw a Video said part # was 118329 cant find it please advise | For your 2001 Dodge Dakota, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118329 is...
Recommendations Of Parts To Flat-Tow 2000 Jeep Grand Cherokee With Draw-Tite Tow Bar
I want to hook up my old 33-305-1368 tow bar to a 2000 Jeep Grand Cherokee, V8, 4wd. What parts or kit will I need to do hook up? If there is options of hidden or not hidden that would also help. | You may have already done this but make sure...
Replacement 7-Way and Pigtail for 2002 GMC Sierra
Im trying to replace my 7 pin twist lock factory bumper plug and also have along enough pig tail to reach my factory wires coming from trk and gooseneck plug So will the ones i have in my cart work?? id really like a split pig tail so id have...
7-Way to 5-Way Adapter for a Honda Pilot with 7-Way and Trailer with 5 Pin Connector
Just bought a new 2010 Honda Pilot with built-in 7-pole connector. I have two trailers, one has a standard flat 4-pin connector and the other has a round 5-pin with separate connections for left turn, right turn, and brake lights. I currently...
Filter Your Search
Contact and Help