Best Lightweight Loading Ramp for Vehicle with Low Ground Clearance
I need light weight ramp set that will load my 1991 Mazda Miata with a weight of 2290lbs total with me inside it. I have no idea which ramps I need. I think 10 but could get away with 8 if I use wood extension. Please help | The best loading...
Gen-Y Hitch Loading Ramps # 325-GH-R96 for a 5,000 lb Scissor Lift
im looking to use these to load a scissor lift on my trailer and note i do use a winch to pull it up on the trailer, the lift weighs 5000 lbs . do you think this is ok? | Each ramp included with the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96...
Which Fixed Drop Ball Mount for 2 inch ball
Hi, is like to use this system but, with the hitch in the lowest setting the upside down ball has very little clearance. Could you recommend a hitch with a 2inch ball that is a similar length to the system included with this hitch? Ty | I have...
Will The Buyers Products Black Receiver Tube 6 Receiver Tube Extend The Receiver 6
does part # 337RT25806B extend the receiver 6 inches or is the steel tube 6 inches long ? | The Buyers Products Black Receiver # 337RT25806B steel tube is 6" and is a weld on receiver for doing your own fabrication but not an extender. We...
Weight Distribution Hitch with Gen-Y Torsion 2 Ball Mount
Can I use my existing weight distribution hitch with this item? | Yes. You can use your existing weight distribution hitch with the Gen-Y Torsion 2 Ball Mount # 325-GH-1324 without any additional components, but it is not the optimal setup....
Extended Ball Mount For a 2-1/2 Receiver For Towing a 8,000LB Trailer
I have a f250 with a 2 1/2 inch hitch and i need to have between 12-14 inch extension to tow 8000 lbs | I recommend the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1324 as being the best way to extend your hitch ball on your F-250....
Why is there a Height Limit on Aluminum Car Hauler Ramp Set 288-07502
Why are these ramps liminted to 16inch heigth | The height restriction on ramp set # 288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them....
Comparing Gen-Y 5TH Wheel To Gooseneck With 1621 Pin Box Lengths
What is the distance between the top of the slop and the center of the ball coupling? Changing out the bed on my truck to an 84inch flatbed with gooseneck ball. My LP1621 is 16inch to center of pin. Just trying to see if this will be the same....
Can Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box Fit with Pull Rite SuperLite 2600
Will the Gen-Y pin box Part Number 325-GH-8040 work with my Pull Rite Superlite 2600 single point hitch with the ball adaptor? | Yes the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and Lippert 1621 HD # 325-GH-8040 will work...
Can Roadmaster Dual Hitch Receiver Adapter be Used for Towing and a Bike Rack
On my 2 inch hitch I use a riser that is about 4 or 5 inches dont know exactly where to measure to make my pop up tent trailer level. I was wondering if this accessory would enable me to install my Hollywood electric bike rack on top. So I would...
How Does Gen-Y Torsion Adjustable Ball Mount Compare to Weight Distribution System
How does this compare with a weight distribution and anti sway hitch mechanism? Better? | The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1324 that you referenced doesn't have the same features as weight distribution or sway control...
Recommended Shock Absorbing Weight Distribution Shank
I would be interested in one of the curt shock absorbing hitches, but i have a weight distributing hitch. Could i use that ball mount on the curt shock hitches? | I have another option for you, but the Curt Rebellion XD Shock Absorbing Adjustable...
Adapter For MORryde Cushioned Pin Box With Fabex 750 Bolt Pattern To Use Gooseneck Hitch
I have a 2008 Carriage Cameo. I can no longer read the data sticker on the MORryde pin box. I have attached photos. The Measurement from the pin to the first row of bolt holes 3a is 17, second row is 21 3/4inch and third row 26 1/2. That means...
Will Offset Ford OEM Puck Gen-Y Hitch Gooseneck Trailer Hitch Lighten Front Axle of Tow Vehicle
My axle is approx 2 1/2 inches behind my ball. Would this move the pin weight behind the axle by 2 1/2 inches compromising stability and lightening the weight on front axle? Thanks | Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford...
Can Salt Spreader be Installed on a Compact Tractor
Do you make a sand spreader compatible with an older model Honda compact tractor? | The salt spreaders that we have are designed to either fit into the back of a truck or into a hitch receiver. If you're able to install a 2" receiver on your...
Is it Safe to Use MaxxTow Dual Hitch Extender to Carry Bike Rack and Flat Tow a Jeep
I am still a little confused about pull weight capacity of this hitch extender. I have a 5K hitch on my MH. I tow a 4K jeep. I added the extender to put bikes on back of MH and still pull the Jeep. Am I within my limits. Somewhere I thought...
Will I Have Turning Clearance Issues Using The Gen-Y Gooseneck Pin Box On Short Bed Silverado 2500?
I have a 2020 Chevy 2500 with a 6.5’ box and a 2022 KZ Durango Gold G356RLQ fifth wheel camper. Will I have tight turning issues? I am using a Curt gooseneck C38CR. Will I have side clearance issues when using a Gen-Y Hitch 5th Wheel to Gooseneck...
Can I Use the B&W Continuum Weight Distribution System Work w/ A Gen-Y Torsion Ball Mount?
Can I use the new BandW Continuum with the Gen Y Boss GH-1125? | Yes, you can. The B&W Continuum Weight Distribution System item # BW78FR will work with the Gen-Y Torsion 2-Ball Mount item # 325-GH-1125. The Continuum has a tongue weight range...
Can Gen-Y Offset Ball Adapter GY43XR be Used with Reese Goosebox
Will this goose ball adapter work with the Reese Goosebox on a Ford F-350 Crew Cab with 6 3/4’ bed? Will any warranties be voided if using this? | Yes, the Gen-Y offset ball adapter part # GY43XR that fits the Ford puck system of your truck...
Offset Gooseneck Ball that Fits 2020 Ram 2500 OEM Rail Kit
2020 Ram 2500 6’ bed. I’m using a 20k lb Reese fifth wheel goose box with a single ball Reese bed hitch on a factory prep package. I need to get an offset ball so i have more distance from the front of my camper and the back of my cab. What...
Mounting Hardware for Gen-Y Shock Absorbing 5th Wheel-Gooseneck Pin Box
Hi Im in the market for a gen-y 5th wheel to gooseneck conversion and Im looking at the 1621/1621HD - 30K GTW - 4.5K TW Item # GY58FR my question is does it come with mounting hardware. Thank you | The Gen-Y Hitch Shock Absorbing 5th Wheel-Gooseneck...
Can Gen-Y Hitch Pin # 325-GH-096 Be Used as Hitch Pin for Convert a Ball Ball Mount
Is this hitch pin compatible with the Convert-A-Ball dual cushioned adjustable hitch? I’d like to use this Gen-Y pin for the connection of the hitch to my Jeep’s receiver, and also use a second one to secure the adjustable ball platform. |...
Can I Use Gen-Y Gooseneck Couplers in the Reverse Orientation?
I’m looking at the gen-y torsion neck for a gooseneck trailer 5.5k. My question is can I run it to offset the trailer further forward, reverse of the normal direction? Or would that cause issues | I contacted Gen-Y, and they stated that using...
Can I Use the Thule Arcos Enclosed Cargo Carrier w/ a Dual Ball Mount?
Would it be possible to use this in conjunction with a lightweight bike carrier above with a dual 2inch heavy-duty receiver? | Yes, you can if you use something like the Replacement Shank for Gen-Y Adjustable Ball Mount item # 325-GH-304. This...
Filter Your Search
Contact and Help