Result:

What is the replacement for Atwood 33535E Rv propane detector | The closest option we'll have to your Atwood 33535E LP/CO2 Detector is going to be the RV Propane Gas and Carbon Monoxide Detector # RS54FR that you were already looking at. It...

I need a tv propane gas detector. Model LP_DOB Part 31013 Serial PP00300190 | Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style...

Since the Atwood 36681 is discontinued what would be the best replacement considering the size of the 36681 hole Im dealing with? | You could use the 2-wire Propane Gas and Carbon Monoxide Detector part # RS34FR in place of the Atwood 36681...

Not sure which replacement model to get. I have no clue the other numbers I found on mine are pp00276003 33535e Can you please help me | You can use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black) to replace your current Atwood...

Is this the correct grass catcher for the new Scag SWZT 48inch with the HERO deck? Ive only seen catchers for the Advantage deck and the Velocity deck. | Unfortunately, the Rack'em Grass Catcher for Scag Lawn Mower with Advantage Deck, part...

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

Just looking for a bag for a scag liberty z 48in model number, SMZL-48 | Hey Kyle, the correct Grass Catcher for your Scag Liberty Z48 is the part # RCMMS4-OBS1 that you referenced. |

Hi, I’m looking for a swivel mont jack that would work on a 6” y’all by 2” wide frame. Do you have anything like this? Thanks. | The only bolt-on swivel jack we have that works with 6" tall trailer frames is the Trailer Valet 5X Swivel Jack...

I need a propane detector for my 2017 Winnebago micro mini camp trailer the original Atwood propane detector went bad so I need a new one the numbers are PP00384842 33535E just curious what the replacement would be for this being dometic bought...

I am looking for a side bagger for a husqvarna Z4219 mower. Do you have one that would fit this model? Thanks | Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher # RCMMS4-EXS1. This comes with the 4.4...

looking to replace an OLD propane detector in a pop up, This is the part I have that is old and not working see pictures looking at your Atwood 36720 RV Propane Gas Detector - 12V DC, White. Will this work? Im not worried about mounting/size...

replacement for RV Propane Gas Detector Model LP_DOB Part31013 | Hey Kathy, to replace your current Atwood 31013 propane detector, you can use the RV Propane Gas Detector # RS64FR. This detector measures 4-1/4" long x 2-5/8" wide x 1/2" thick,...

What do you suggest I replace my Atwood model 900-0143 CO alarm with? | Hi Glen, Atwood LP detectors are phased out with only a few options still floating around out there so your best option would be to replace it with one from RV Safe. These...

Do you have a grass catcher for a Ariens IKON XD-52? | I checked with Rack'em and the Grass Catcher part # RCMMS4 is a fit for your Ariens IKON XD-52. |

Hello - We have a 6x10 enclosed trailer that we haul our motorcycle in. We have two kayaks - 9.5 and 10.5 in length that we need to carry as well. This will be hauled behind a 32 foot Class C RV. With that in mind, wind resistance is less of...

I need a replacement Atwood propane gas dector model LP DOB Part 31013 or a compatible that fits the 3103 wall bracket. I can send you a picture. | Hey Alan, you can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013...

Do they make a trailer dolly to hook up between pulling truck and the trailer? To keep the weight off of the towing vehicle? | The only trailer dollies we carry are manual like the Rack'Em # RA20 you found, crank operated like the Trailer Valet...

Can you put 12 wheels on this model? Lift handle. Thanks for the quick feedback and great customer support! | We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned...

Hi there, I have a 6X12 trailer and I’d like to get a wheel for the front to be able to move it easily when unhitched. Which ones would you recommend? Thank you! | The best option is the Trailer Valet XL like part # TVXL25 for if you have...

I need a grass catcher. I have a Torro atimecutter 42In. What model number will eork for me. And will I need to purchase anything elese to install. Thanks. Karl | Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the...

I plan to replace an old Atwood LPCO 36636 detector with a RS54FR detector as you suggest . My detector has 2 red leads spliced together and then connected to an in-line fuse and then connected to power lead. Single black to common. Might...

good afternoon!! we have questions regarding our exmark stand on 52 inch mowers s series we have been in the market looking to upgrade our grass catchers, that we have been using for the past 30 years..we are interested to see what type of product...

Which grass catcher and bracket for a Toro 42” Timecutter zero turn? | Hey David, I believe what you need is the Rack'Em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower # RCMMS4-EXS1-TORO, but I'd need to confirm your model number first....