Result: knobs

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

Will the 3794DAT fit this hitch considering the little half-round wall thing in front of the twist knob? | Attached is a photo of the hitch on the trailer Im going to rent. It will be parked at a friends house for the weekend...

The main unit is hidden so the only thing you see is the control knob in the dash. The knob acts as the override and controls the brake power. | Hello, I am looking for recommendations on a brake controller...

This also installs really easily with the included brake controller harness but it only puts a small knob on your dash as well. | 2008 Nissan Frontier.. I installed an Etrailer hitch and 4 wire wiring harness several years ago....

The knob controls the braking power and also acts as a manual override. | I have a stock 2016 144wb Sprinter 2500, 4wd, standard roof. I need to tow a car hauler trailer with a GVW of 4,800 lbs. electric brakes. The Sprinter...

You can use the Mounting Panel # 331-TPSI-002 to place the control knob in an open slot on your dash for a factory appearance. | Similar to planning on towing a 2022/23 Coleman 17B travel trailer mentioned in question-652325...

The main unit for the brake controller mounts in an out of sight location so only the control knob is visible. The knob controls the braking power and also acts as the manual override. | Tow vehicle 2016 Kia...

This is a very simple to use proportional brake controller and it only has a small dash mounted control knob so you will not have a large controller on your dash. | I have recently moved up to a 7x14 TA cargo trailer from...

This will allow you to connect to the factory wiring and give you a low profile controller. The control knob can be mounted on the dash where it is easy to access, while the main control unit is secured behind the dash. |...

The main unit is hidden so only the control knob is visible which also gives it an OEM look. | Hello, I have a 2023 sienna with the factory tow package. I would like to upgrade my trailer but am concerned about tongue weight....

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

The integrated locking knobs on the shank will do a great job of securing itself to the reducer sleeve, but because the sleeve only has one set of hitch pin holes, there will be no way to actually secure the sleeve to the hitch receiver. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

It also has a unique installation method where the main portion of the brake controller is installed behind your dash and the only visible portion is the control knob. You will also need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete your installation. |

For a brake controller I really like recommending the Redarc Tow-Pro Elite # RED44FR for a few reasons; you can install it virtually anywhere since you only need access to the 3/4" diameter control knob, it uses color coding to communicate the different settings so you don't have to try to read anything, and then it features 2 different modes (proportional and user-control) so that you get the most control over your trailer braking action whether you are towing on the highway or overlanding (which is becoming increasingly popular among Jeep Wrangler owners). |

The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob. Check out the picture I attached below. A customer did this install on a 2022 Frontier and it blends in well with the factory switches. |

The Liberty brake controller is great because it doesn't have a bulky unit inside your Acadia's cab, it's just a knob which means it won't be taking up a bunch of space and you aren't going to be bumping your knee on it. |...

The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob. It's about the size of a nickel and you don't have to worry about banging your knee on a conventional style controller. |