Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...

The Inno Tire Hold 4 Bike Platform Rack part # INH142 comes with locks for both the hitch and bikes. The hand knob on the front of the rack which is used to tighten and loosen it has a lock core built in that won't let you loosen it, which is required to remove the rack, without the key. |

Although it's not threaded all the way like the original Inno carriage bolt, it will provide enough of a thread to install the bottom knobs without a problem. I have attached a couple of photos to illustrate. | Do you know...

This rack has locking torque knobs that secure the rack to your vehicle. I have included product description links and a video review link below. | What is the distance between bars bar spread. | The 2020 Honda Accord Roof...

This also installs really easily with the included brake controller harness but it only puts a small knob on your dash as well. | 2008 Nissan Frontier.. I installed an Etrailer hitch and 4 wire wiring harness several years ago....

It's super lightweight like you mentioned and also has an anti-rattle device built into the shank of the rack. There is a knob under the main shank of the rack that allows you to remove the play in the hitch opening. | I sold...

Then, after the pin is in the hitch and shank, that is when you adjust the tightening tension knob. I went ahead and attached a video that walks you through installing the pin. | I have the Inno bike rack. The metal spring...

A great feature of the Tire Hold 2 is that it comes with both locking knobs and a locking cable that deters theft of the bikes as well as the rack itself. | what is the best hitch carrier for 2 ebikes each weighing 60lb with...

The installation is easier compared to the other options because of it's integrated tightening knob. The feet of the Inno rack are compatible with the fixed mounting points on the roof of the Ford. | 2004 Ford Excursion Limited....

Ive got the original mounting kit plates and bolts with knobs, no U-bolts. If it would mount on aero, would I need a U-bolt kit? | My parents have an Sears XCargo that is a later model 2000s Grey top and black base that theyre...