Result: code

I started getting an SC error code, so I started looking for a short. As I was troubleshooting, I noticed that sometimes I got the SC code, and sometimes I got numbers, like everything was working fine. |...

I spoke to my contact at Tekonsha, and he said that the P.L. code is not very common and as you can see in the picture that I have attached, this code is sometimes mistaken with the O.L. code because it looks so similar. |

What does code SH mean on drawtite brake controller? | What does code SH mean on drawtite brake controller? | The display code SH on your Draw-Tite Activator Brake Controller, part # 5504, can indicate that there is a short...

The Tekonsha Prodigy P2 Trailer Brake Controller # 90885 flashing is an error code. It sounds like you may have two separate codes. | Why is the p.L.flashing P2 Controller | The Tekonsha Prodigy P2 Trailer...

The camper has an error code LF. We have retracted the all four leveling systems 6inch and retracted as well as pushed the the Error code on the system box and push retract. | The camper has an error code...

What is the code 5.H | What is the code 5.H | The code 5.H (flashes 2x per second or a steady display) on the Prodigy P2 # 90885 indicates the brake wire is seeing a short during idling conditions or using test lights or non-Tekonsha...

Sometimes when I first hook up the trailer and get ready to leave the site, I get a 5H code, I see you refer to it as SH code, and the trailer brakes are weak if they're working at all. | HI, I bought an older...

is it normal for the PL code to flash when applying the brake pedal? | is it normal for the PL code to flash when applying the brake pedal? | Hey Earle, the "P.L" error code on the Tekonsha Prodigy P2 Trailer Brake Controller...

On my 2003 trailblazer the wiring codes are called AUX and Chmsl. What do they stand for. | I purchased a brake controller. On my 2003 trailblazer the wiring codes are called AUX and Chmsl. What do they stand for. The other...

Everything is hooked up properly, controlled still shows a n.c. Code when override is pressed. How to fix? | Everything is hooked up properly, controlled still shows a n.c. Code when override is pressed. How to fix? | There...

Fogatti Tankless Water Heater EC Error Code TroubleShoot Mine shut down. Pulled fuse for 15 minutes. | Fogatti Tankless Water Heater EC Error Code TroubleShoot Mine shut down. Pulled fuse for 15 minutes. When we turn the...

| The SC error code on the Valley Journey HD brake controller indicates that there is a short circuit situation. | On our break controller message cs or c5 keep flashin along with 5c or sc. Please explain. Thanks | The SC...

If the SC code stays then you know the problem is in the controller and should be replaced. | i just purchased a camper when towing it home the controller would engage the brakes on the camper climbing through the numbers but...

Sh code when connected to the trailer when I unplug it from the trailer I have 2 red dots that stay on | Sh code when connected to the trailer when I unplug it from the trailer I have 2 red dots that stay on | The SH code you...

My technical contact at Tekonsha informed me that an OC error code is typically displayed on a Hayes manufactured product. | Can we still pull a trailer with the OC error? Is it safe? | My technical contact at Tekonsha informed...

Ive even borrowed a Prodigy and its showing the same codes. the brakes are getting voltage, and the problem is intermittent - the codes are not constant. | towing a 2007 Keystone Copper Canyon 5th wheel....

Put everything back together and checked the controller the code was oo. when I stepped on the brake the code went to o.L. | The controller code showed S.H., so I disconnected the white neg. wire connected...

I have a PL fault code with brake lights staying on. Test shows power to red wire without depressing brake pedal. | I have a PL fault code with brake lights staying on. Test shows power to red wire without depressing brake...

| The OL code indicates overload and the SH code indicates short circuit. | Trailer brakes come on way too hard with light pedal pressure and the adjust wheel makes no adjustment. Also the brake hand lever...

Its a different body style and apparently the color coding of the taillights/turn signals have changed. | Hello, Installing the ZCI Tekonsha that I got from you guys about a year ago! My Audi Q7 is a 2014. The demo video...

I have a 2005 holiday rambler ambassador built on a roadmaster chassis..I need the color codes for the 7 way trailer plug...I found the 7 wire harness but it seems like the traditional color codes are not the same i.e. |

the code is 6.1 when I start the engine and no code when I apply the brake and no brakes | the code is 6.1 when I start the engine and no code when I apply the brake and no brakes | With a code of 6.1 at start...

The instruction sheet is helpful... but it requires that I know what my vehicle code is. Specifically, it states See catalog or website for vehicle code definitions and further information. | The instruction...

All of these error codes showed occurred with and without the trailer hooked up. | To date Ive had two Prodigy P2s installed in my 12 JKU. Each time the unit worked as it should for the first few minutes. After a few minutes...