Result:

What is the wiring diagram for the round 6 pin male connector that is one end of the umbilical cord. I have a 2017 Jayco Precept towing a 2019 Ford Ranger and I’m installing the stealth system | One end of the umbilical cord that comes with...

Hi, I’m setting up a 2023 Ford Ranger as a flat tow vehicle. In doing research I see Curt has a light harness that uses the OEM connectors instead of splicing wires. You don’t seem to carry this kit Curt 58986, is there a problem with this...

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

Im looking into putting a baseplate on a 1999 Ford Ranger 4x4, you have the Blue Ox fixed. I am curious about the tow bar itself. Will it only accept a blue ox tow bar, or will some other tow bars fit? | Hey Mike! The Blue Ox Base Plate Kit...

I’m changing my tow vehicle to afford Ranger. I have everything I need except the base plate the wiring and the breakaway. It is a 2000 Ford Ranger four-wheel-drive king cab | Hey Andre, thanks for reaching out! For wiring I recommend the Hopkins...

Hello etrailer, I have a 2023 Ford Ranger that I would like to get a Tow Bar and supplemental braking system ordered and look for an installer. I have a cart listed with parts that I think I need for what Im trying to accomplish for a complete...

I am considering the purchase of a 2002 Ford Ranger as a flat tow vehicle. It is 2WD, manual shift transmission. Do you have a kit for this model? | Yes, we do have the parts you will need to flat tow a 2WD 2002 Ford Ranger. I have listed them...

I purchased the a diode kit, brake relay, brake buddy 3, and the other parts recommended to flat tow my 2019 ranger. In the diode kit installation video, there is no setup of a line to keep the ranger battery charged. The brake buddy has...

Can a 1996 Ford Ranger 5 speed manual 2WD be flat towed without disconnecting the drive shaft? If yes, could you please provide a complete list of parts I would need to do this? Thank you! | I took a look at the online owner's manual for a 1996...

I need help ing the right equipment to flat tow my 2019 Ford Ranger to my motor home. I want to make sure I get everything. I’m between Blue Ox and Road Master. I am new on how to install it and how the components work. Thanks for all the help....

I would like to flat tow a 2010 Ford Ranger 4x4 automatic have been told its possible with installation of a flat tow kit. Ford no longer makes these is this something you can help with? Thanks | It is absolutely possible and I'd be happy...

Can you send me all components needed to flat tow the vehicle above. Trying to help out my wife’s cousin who is new to this. Thanks | You'll need base plates, a tow bar, safety cables, a wiring solution, a supplemental braking system and possibly...

Looking at wiring diagram the wire going to the vacuum pump and the wire going to battery maintainer are tied together. That would show the only time the battery maintainer in being charged is when the pump is on due to brakes being on. If...

Are blue ox base plates available for 2024 ford ranger Thank you | It doesn't look like the 2024 Ford Ranger can be flat towed, Ron. I went ahead and checked both Roadmaster and BlueOx and they only offer base plates for the 2024 Ford Edge,...

Can you back-up a couple of yards with any or some brake system in use, just enough to get out of a tight spot you may have gotten yourself. I am looking at InvisiBrake, Patriot 3, Brake Buddy 3 just to name a few...!? Thanks. | Reversing the...

Hello, I have a question I need a tow bar to pull a 1999 ford ranger for my 2015 Nissan Armanda. What do you recommend? | To tow your 1999 Ford Ranger you could use the Roadmaster StowMaster Tow Bar - Car Mount - 2-5/16" Ball - 6,000lbs # RM-504....

I need to install my Brake Buddy in a different vehicle. What parts do I need for this? I was told the part number is 39495 but your site is showing a different number. | In order to transfer the Brake Buddy Classic 2 Portable Supplemental...

2011 Ford Ranger XLT 2WD, 4.0 V6, w/ ARE fiberglass cap, 55K miles. I already installed the RAS system last week. However, in my long wait for that suspension upgrade I also ordered the Timbren part # TFRR050A. So my question is this. Is using...

I have towed my jeep in the past with a tow bar. I am Buying a 2021 Ford Ranger and would like a basic Roadmaster tow bar and base plate for this ford to motorhome application. This towbar will only be used on short 200 to 300 mile trips and...

Please recommend the necessary parts to prepare a 2021 Ford Ranger for flat towing. I currently pull a Chevy Colorado with a Roadmaster All Terrain tow bar that uses a crossbar for the base plates and has a Demco stay and play duo braking system. I...

I need advise on setting up my 2002 Ford Ranger 2WD, 3liter engine, for a better suspension for Towing a Trailer. What do you recommend for Air Bags and other changes that are adjustable for a better Towing suspension upgrade. Thanks. | The...

Can I use your breakaway system without a supplemental braking system ?. | Without a Supplemental Braking System # HM39524 the Hopkins Replacement Break-Away Switch # HM20010 does not have a braking system to activate when your flat towed vehicle...

I am looking to set up my new Ford Ranger to tow behind my motorhome. I have seen a few forum posts about the transmission failing after being towed due to the battery drain and the transmission reverting back to normal during the towing. I...

Will the crossbar style baseplate cause the collision avoidance sensors to activate?. The bar will run right in front of them | To give you the short answer- No. The crossbar style base plates like the Roadmaster # RM-524459-4 will not interfere...