bing tracking image

Search: 30 Amp Replacement Plug   >   !Go Power  x   >   !Dexter  x   >   2010  x   >  

Result: 30 Amp Replacement Plug

What Adaptor and Power Cord do I Need for My 4-Prong Female Electrical Setup on My RV?

electric plug female is installed and need to find or make a matching male plug with 30 Amp wiring | Hi, I have converted my horse trailer dressing room into a living quarters...

50amp SmartPlug Cord Package Contents

The SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' Item # SM86FR does not come with the smart | In the listed item, SM86FR, it appears to include both the cord, with male Smartplug and male...

Looking For A Replacement For My Magnetek 6700 Series Model 6720

I need to replace a Magnetek power converter. Series 6700 Model 6720, 30 amps. What would | I need to replace a Magnetek power converter. Series 6700 Model 6720, 30 amps. What would be a...

Which Fuse to Install the FuseMaster Fuse Bypass on for a 2010 Honda Fit

With the 76511 model it says 20 amp and the radio fuse is a 30 amp. Will this blow the 20 amp fuse | Which fuse do I pull on a 2010 Honda fit to replace with the 76511 fuse...

Troubleshooting 2010 Keystone Laredo 245RL Landing Gear Blowing Fuses

the camp ground the landing gear motor would throw 30 amp fuses while trying to raise the camper. The motor | Hello, I have a 2010 keystone Laredo 245RL 5th wheel and just recently while trying to leave the...

Adding a 7-Way Round Pin Trailer Connector to a 2010 Ford Expedition with a Factory 4-Way Flat

to positive battery terminal via a 20 amp (2 to 4 brakes # PK54520) or 30 amp (6 to 8 brakes # PK54530 | Is there a item like 37185 that has round pins that would fit a 2010 Ford Expedition...

No Power Using the Curt Vehicle Wiring Harness Part # 56083 on a 2010 Lexus RX 350

are going to want to check the 30 amp fuse in the # 44 position on the fuse box located underneath the hood | i installed the curt 13143 class3 hitch an d56083 wiring harness to my 2010 lexus rx350. plugged...

No Power To Brake Controller With Plug-In Harness On a 2010 Ford Explorer

position within your engine bay fuse box. This is a 30 amp fuse and most likely the reason that you do | Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire...

Replacement Water Pump Recommendation For A Shurflo 2088=-422-175

What replaces this pump ? | What replaces this pump ? | To replace your Shurflo 2088-422-175 water pump, I recommend the Flow Max RV Fresh Water Pump - 12 Volt - 3.0 Gallons Per Minute # LC689052. This water pump will directly...

Parts Needed to Install 7-Way and Brake Controller in 2010 Toyota Highlander

wire coming into the Curt box before the fuse. • Put a 30 amp fuse into the factory box at the Towing | Hello, After looking at the factory wiring diagram on the 2010 Highlander, why cant I: • Use the Curt...

Installing Aftermarket Trailer Brake Controller, 2010 Dodge Ram 3500 with Factory Brake Controller

on the brake controller through the fire wall to the positive battery terminal via a 20- or 30-amp circuit | The factory installed integrated brake controller on my 2010 Ram 3500 will be replaced by a MaxBrake...

Brake Controller Install on 2010 Toyota Highlander

wire would run through the firewall to the positive battery terminal via the 20 or 30 amp breaker | I have a new v6 2010 highlander with a tow package .It has a 4pin connecter .I need to connect a brake cotroll...

How to Install Tekonsha Primus IQ Brake Controller TK90160 on a 2010 Toyota 4Runner

with a 20amp or 30amp circuit breaker, included in the # ETBC7 kit. Blue: Electric brakes, this wire | How to Install The Primus IQ Brake Controller on a 2010 Toyota 4Runner with the Toyota...

Prodigy RF Electronic Hand-Held Controller Unit Is Blowing Fuses

the needed power to the controller. This also includes a 20 amp fuse, but this can be replaced with something | What size fuse should I use in the controller into the vehicle cigarette lighter? I have tried...

Installation of Tekonsha P2 Brake Controller and ETBC7 Kit on 2010 Jeep Wrangler Unlimited

terminal. Black: 12v lead, attached to the positive battery terminal with a 20amp or 30amp circuit | I purchased the Tekonsha P2 with ETBC7 hook ups and am completely lost with how to install....

Hardwiring a Brake Controller from Scratch on a 2010 Ford Flex

on the brake controller connects to a 20 or 30 amp circuit breaker (see the brake controller instructions | Where is the connector located for Brake Controller on a 2010 Ford Flex | On the 2010 Ford Flex,...

Trailer Wiring Harness Recommendation for a 2010 Chrysler Town and Country

a replacement for Curt powered converter have all wiring in place just need the converter dealer said curt unit | can i use the Tow Ready Vehicle Wiring harness #119146 on my 2010 town and country, need a replacement for Curt...

Which Fuse For Trailer Running Lights On 2010 Ford F-150

box. This is a 20 amp fuse so if it is missing or blown you will need to replace it with another 20 | My Ford 2010 f-150 Pulling my boat. My brake lights blinkers work great. My lights don’t This is...

Replacement Control Panel For The Lippert Ground Control 3.0 6-Point Leveling System

current touchpad has, is a direct replacement for your unit, and also does not include the plug like | Hi We have a Lippert 6 Leg auto level system that has a control panel labelled L50-241318-0 8-25-11WD....

Installing a P3 Trailer Brake Controller on a 2011 GMC Savana Van RV Cutaway

lead on battery,ran#12 black tobatt side of 30 amp breaker ran#12 black from aux side of breaker | I installed the seven point on rear of van plugged existing 4-way from truck to 7-point I installed, then...

Replacing the 7-Way/4-Pole Trailer Connector on 2010 F-350 Super Duty-King Ranch

aren't getting power on the running lamp circuit at the connector, check the 30 amp fuse in the # 42 | I am looking for guidance on replacing the tow package wiring harness on my 2010 F-350 King Ranch Dually....

Connecting My New P3 Brake Controller to a Factory 4-Way Flat On a 2010 Ford Ranger.

breaker is used for trailers with less that 6 brakes and the 30 amp circuit breaker is used on trailers | Help! I bought the P3 Break Controller, and the 4 flat/7 pin plug with the long gray cable, the three...

Parts Needed When Moving the Hopkins Agility Brake Controller to a 2010 Dodge Ram

's positive battery terminal with a 30amp circuit breaker, part # 38630 if needed. Dodge color: yellow/red | I purchased a hoppy brake controler agility with a harness for my 2001 ram. I sold it and bought...

Instructions for Using ETBC7 Brake Controller Install Kit on 2010 Cadillac SRX

to the positive battery terminal via either the 20- or 30-amp circuit breaker included in the kit (consult brake | It didnt come with any instructions for the wiring of this item. What is up with this.???????? I...

Filter Your Search